Table of Contents
Advertisement
FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.11.12
Table 589
7.10.11.13
Table 590
(1 of 2)
Issue: 13
Item
Description
Parameters
preference — An integer.
Values: 1 — 255
Default: 100
receive
receive command
Item
Description
Syntax
receive receive-type
no receive
Context
configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description
This command configures the type(s) of RIP updates that will be accepted and processed.
If both or version-2 is specified, the RIP instance listens for and accepts packets sent to the
broadcast and multicast (224.0.0.9) addresses.
If version-1 is specified, the router only listens for and accepts packets sent to the broadcast
address.
This control can be issued at the global, group or interface level. The default behavior accepts
and processes both RIPv1 and RIPv2 messages.
The no form of the command resets the type of messages accepted to both.
Default
no receive — Accepts both formats.
Parameters
both — Receive RIP updates in either Version 1 or Version 2 format.
none — Do not accept and RIP updates.
version-1 — Router should only accept RIP updates in Version 1 format.
version-2 — Router should only accept RIP updates in Version 2 format.
send
send command
Item
Description
Syntax
send send-type
no send
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
549
- Quick Links:
- 2.3 Cli Command Syntax Symbols
Hide quick links:
Advertisement
Table of Contents
