Advertisement
Quick Links
Quick Setup Guide
DBJ (DB43J DB49J)
DCJ (DC43J DC49J)
− Recommended hours of use per day of this product is under 16 hours. If the product is used for longer than
16 hours a day, the warranty may be void.
− The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
− Download the user manual from the website for further details.
http://www.samsung.com/displaysolutions
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI Logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
Checking the Components
Contact the vendor where you purchased the product if any
components are missing.
The pictures may look different from the actual components.
Warranty card
Quick Setup Guide
(Not available in some
Power cord
locations)
Batteries
(Not available in some
Remote Control
RS232C(IN) adapter
locations)
BN68-08179G-02
Control Panel
Speaker
Remote sensor
1
Press a button on the remote control pointing at the bottom of the
product face to perform the function. The remote control sensor is
located on the bottom of the product.
- Using other display devices in the same space as the remote
control of this product can cause the other display devices to be
inadvertently controlled.
Panel Key
2
Reverse Side
Troubleshooting Guide
The functions available may vary depending on the product model.
Issues
Solutions
The screen keeps
Check the cable connection between
switching on and off.
the product and PC, and ensure the
connection is secure.
No Signal is displayed
Check that the product is connected
on the screen.
correctly with a cable.
Check that the device connected to the
product is powered on.
Not Optimum Mode is
This message is displayed when a signal
displayed.
from the graphics card exceeds the product's
maximum resolution and frequency.
Refer to the Standard Signal Mode Table
and set the maximum resolution and
frequency according to the product
specifications.
The images on the
Check the cable connection to the
screen look distorted.
product.
The screen appears
Check that the resolution and frequency of the
unstable and shaky.
PC and graphics card are set within a range
compatible with the product. Then, change the
There are shadows or
screen settings if required by referring to the
ghost images left on
Additional Information on the product menu
the screen.
and the Standard Signal Mode Table.
There is no image on
The product is in power-saving mode.
the screen and the
power LED blinks
Press any key on the keyboard or move the
every 0.5 to 1 second.
mouse to return to the previous screen.
Connect to a USB memory device.
1
‐ The USB ports on the product accept a maximum
constant current of 1.0A. If the maximum value is
exceeded, USB ports may not work.
Connects to a source device using a HDMI cable or
2
HDMI-DVI cable.
DVI: Connects to a source device using a DVI cable or
3
HDMI-DVI cable.
MAGICINFO IN: To use MagicInfo, make sure to connect
the DP-DVI cable.
Connects to MDC using an RS232C adapter.
4
Connects to a source device using the AV/Component
5
adapter.
Connects to MDC using a LAN cable.
6
Receives sound from a PC via an audio cable.
7
Connects to the audio of a source device.
8
Issues
Solutions
Picture quality of the
product is different
Use an HDMI cable to obtain high-
from the dealer
definition (HD) picture quality.
shop where it was
purchased.
The remote control
Make sure that the batteries are correctly
does not work.
in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon
signs switched on in the vicinity.
A beeping sound is
If a beeping sound is heard when your PC
heard when my PC is
is booting, have your PC serviced.
booting.
When I try to change
The message "The defined resolution
the PC resolution, a
is not supported." appears if the input
message "The defined
source resolution exceeds the maximum
resolution is not
resolution of the display.
supported." appears.
To resolve the issue, change the PC
resolution to a resolution supported on
the display.
Advertisement
Related Manuals for Samsung QR Series
Summary of Contents for Samsung QR Series
- Page 1 − The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. − Download the user manual from the website for further details. http://www.samsung.com/displaysolutions The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
- Page 2 DCJ: DVI/MAGICINFO IN DCJ: DVI/MAGICINFO IN (Please read the appropriate section that corresponds to the marking on your Samsung product before attempting to install the product.) The DCJ models do not support DOLBY AUDIO for HDMI sources. DCJ: DVI/MAGICINFO IN...