B-Lan Setup & Overview - LG Lodging Guest Interactive Pro: Centric 32LD660H Setup Manual

Commercial mode setup

Hide thumbs Also See for Lodging Guest Interactive Pro: Centric 32LD660H:

Table of Contents

Reference: b-LAN Setup & Overview

The b-LAN module is internal to the TV. It allows hotel/institution head end equipment with b-LAN technology

to communicate, via the institution's RF distribution system, with the TV for configuration and control.

Note: MPI cards with b-LAN technology—LMT7Z5, LMT7Z7, LMT7Z9—are NOT supported in TVs in which

b-LAN technology is already integrated.

Installer Menu item 118 POWER SAVINGS controls the power circuitry for both the embedded b-LAN module

and the GAME CONTROL/MPI port. The default value is 003—the b-LAN module as well as the GAME

CONTROL/MPI port circuitry is only powered when the TV is turned ON. See chart below.

POWER

SAVINGS

003 (default)

A b-LAN enabled head end device, such as an LG FMA-LG101, broadcasts over the RF distribution system to

communicate to multiple TVs. When the TV is first installed, it must be turned ON in order for its embedded

b-LAN module to receive communication from the head end device. At this point, if it is desired for the b-LAN

module to always be powered, including while the TV is in Standby, set Installer Menu item 118 POWER

SAVINGS to 001.

Also, if MPI communication is required for external MPI control, set Installer Menu item 118 POWER SAVINGS

to 001 so that the GAME CONTROL/MPI port circuitry is always powered.

Caution: POWER SAVINGS should NEVER be set to 007. This setting is intended for factory use

only.

TV Standby State

b-LAN & GAME

CONTROL/MPI Port

001

TV Power On State

b-LAN & GAME

CONTROL/MPI Port

Power

Off

Power

206-4200

Table of Contents

Troubleshooting