Siemens SIMATIC IPC227G Operating Instructions Manual
Industrial pc, firmware/bios description
Hide thumbs
Also See for SIMATIC IPC227G:
- Operating instructions manual (28 pages) ,
- Operating instructions manual (106 pages) ,
- Operating instructions manual (115 pages)
Table of Contents
Advertisement
Quick Links
Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G
SIMATIC
Industrial PC
Firmware/BIOS description
SIMATIC IPC227G, IPC277G,
IPC327G, IPC377G
Operating Instructions
09/2021
A5E50059883-AB
Important information
Using the firmware
selection menu
Configure firmware
Update firmware
Booting from USB stick
Enable Trusted Platform
Module (TPM)
Automatic switching on of
the device
1
2
3
4
5
6
Advertisement
Table of Contents
Related Manuals for Siemens SIMATIC IPC227G
Summary of Contents for Siemens SIMATIC IPC227G
- Page 1 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Important information Using the firmware selection menu SIMATIC Configure firmware Update firmware Industrial PC Firmware/BIOS description Booting from USB stick SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Enable Trusted Platform Module (TPM) Operating Instructions Automatic switching on of...
- Page 2 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
-
Page 3: Important Information
The firmware (BIOS) is located in a FLASH block on the motherboard. The firmware selection menu can be opened after the device has been started. You can then configure the firmware settings of your device. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 4 Siemens' products and solutions undergo continuous development to make them more secure. Siemens strongly recommends that product updates are applied as soon as they are available and that the latest product versions are used. Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers' exposure to cyber threats.
- Page 5 Important information Disclaimer for third-party software updates This product includes third-party software. Siemens AG only provides a warranty for updates/patches of the third-party software, if these have been distributed as part of a Siemens software update service contract or officially released by Siemens AG. Otherwise, updates/patches are undertaken at your own risk.
- Page 6 Important information Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 7: Table Of Contents
"Exit" tab ..........................25 Update firmware ..........................27 Booting from USB stick ........................29 Enable Trusted Platform Module (TPM) ....................31 Automatic switching on of the device ....................33 Index ..............................35 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 8 Table of contents Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 9: Using The Firmware Selection Menu
4. Select the "Troubleshoot" option. 5. Select "UEFI / Firmware Settings". 6. Click "Restart". Result The "Main Page" with the options of the firmware selection menu (Page 10) is open. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 10: Firmware Selection Menu Options
Configure device startup in "Secure Boot Modus". Setup Utility Start firmware configuration menu. BIOS Update Perform BIOS update. You can find more detailed information under "Update firmware (Page 27)". Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 11: Configure Firmware
<Enter> button. <Esc> A submenu or tab or the Setup Utility is exited. If the Setup Utility is closed after the confirmation prompt, changes to the firmware settings are discarded. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 12: Main" Tab
Function <Enter> Switch between the setting options within a firmware setting, e.g. from hour to minute. [+] [-] Increase or decrease desired value. [0] - [9] Enter desired value. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 13: Advanced" Tab
Base I/O Address 3F8h/2F8h/3E8h/2E 2F8h 2F8h The I/O base address is pre-assigned and also 8h/338h/228h/220h/ recommended. 238h Interrupt IRQ3/IRQ4/IRQ5/IRQ6 IRQ3 IRQ3 The interrupt is pre-assigned and also recommended. /IRQ7/IRQ10/IRQ11 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 14 Disables the serial port. This releases the resources it IPC327G used. IPC377G Base I/O Address 3F8h/2F8h/3E8h/2E 3E8h The I/O base address is pre-assigned and also 8h/338h/228h/220h/ recommended. Only with: 238h IPC327G IPC377G Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
- Page 15 Only with: IPC227G IPC277G Onboard Ethernet The Onboard Ethernet 3 address is defined with this 3 Address: value. Only with: IPC227G IPC277G *The Ethernet addresses are merely an example. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 16: Usb Configuration
Otherwise, the device remains switched off. HD Audio Enabled The onboard High Definition Audio Controller is enabled. Only with: Disabled The onboard High Definition Audio Controller is disabled. IPC327G IPC377G Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 17: Video Configuration
Not Present The PCIE bus device function is not present. Enabled The PCIe Express Port is enabled. • PCIe Express Port Disabled The PCIe Express Port is disabled. Enable Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 18: Memory Configuration
Makes all request protected and ignore range Mode checks. Enabled In-Band ECC for Region 0 is enabled. Disabled In-Band ECC for Region 0 is disabled. • IBECC Protect Region 0 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 19: Security" Tab
Hidden The TPM (Trusted Platform Module) is not visible in the operating system. TPM Operation No Operation Select one of the supported operation to change TPM2 state Enabled Disabled Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 20 (Supervisor Password) can be changed. Enabled A user password is sufficient to start the Boot Manager. User Boot Manager • Disabled The general password is required to enter the Boot Access Manager. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 21: Power" Tab
The Wake Capability of all XHCI USB Ports is disabled. USB Port X60 Wake Enabled The USB port X60 is allowed to wake up the system from the Capability S4/S5. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 22 The Panel Touch is allowed to wake up the system from the S4/S5. Only with: Disabled The Panel Touch is not allowed to wake up the system from IPC277G the S4/S5. IPC377G Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 23: Advanced Cpu Control
Turbo mode is disabled. Balanced It is applicable for better system performance within the state temperature range. It is applicable for the best system performance in operating Performance temperature derated environments. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 24: Boot" Tab
Delay time in seconds during booting so that the user has time to press the hotkey to open the firmware selection menu. EFI (Page 25) EFI Boot Order Settings Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... -
Page 25: Efi
All changes to the firmware settings are discarded. Save setup settings to file The current firmware settings are written to a file. Load setup settings from file Firmware settings are loaded from a file. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 26 Configure firmware 2.8 "Exit" tab Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 27: Update Firmware
5. Change the firmware settings as required for your application. If necessary, use the previously created file with the previous firmware settings for this. 6. Save the firmware settings. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 28 Update firmware Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 29: Booting From Usb Stick
1. Connect the USB stick to the device. 2. Open the firmware selection menu (Page 9). 3. Select "Boot-Manager." 4. Select the USB medium in the "Boot-Manager" and confirm the entry. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 30 Booting from USB stick Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 31: Enable Trusted Platform Module (Tpm)
3. Ensure that the "Available" value is assigned to firmware setting "TPM Availability". 4. Save the changes you made before closing the Setup Utility. You can find information on this under ""Exit" tab (Page 25)". Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 32 Enable Trusted Platform Module (TPM) Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 33: Automatic Switching On Of The Device
During system planning, check whether this automatic startup of your machine or system poses a safety risk and then change the device behavior appropriately. Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 34 Automatic switching on of the device Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
-
Page 35: Index
Boot media, 24 Boot order, 24 Boot prime display control, 17 Firmware configuration menu, (Setup Utility) Boot procedure Firmware selection menu Configuring, 13, 18 open manually, 9 Opening, 9 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB... - Page 36 Configure after starting the device, 13 Starting, 11 Numlock, 13 State After power failure, 16 NVME Boot, 24 SuperIO Version, 12 Supervisor Password, 20, 20 Switching on the device automatic switching on, 33 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...
- Page 37 Configuring device behavior after a wake event, 21, 23 Wake on LAN 1 (X1 P1), 21 Wake on LAN 2 (X2 P1), 21 Wake on LAN 3 (X3 P1), 21 Firmware/BIOS description SIMATIC IPC227G, IPC277G, IPC327G, IPC377G Operating Instructions, 09/2021, A5E50059883-AB...