hit counter script
LG M1721A-BZ Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Monitor
  5. M1721A-BZ
  6. Manual
LG M1721A-BZ Manual

LG M1721A-BZ Manual

17/19 inch lcd monitor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Safety Precautions

Please read these safety precautions carefully before using the product.
If you ignore the warning message, you may be seriously injured or there is a possibility of
Warning
accident or death.
Caution
If you ignore the caution message, you may be slightly injured or the product may be damaged
Precautions in installing the Product
Warning
Keep away from heat sources like electrical heaters.
- Electrical shock, fire, malfunction or deformation may occur.
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
- Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
Do not put heavy objects on the product or sit upon it.
- If the product collapses or is dropped, you may be injured. Children must pay particular attention.
Do not leave the power or signal cable unattended on the pathway.
- The passerby can falter, which can cause electrical shock, fire, product breakdown or injury.
Install the product in a neat and dry place.
- Dust or moisture can cause electrical shock, fire or product damage.
If you can smell smoke or other odors or hear a strange sound unplug the power cord and contact the
service center.
- If you continue to use without taking proper measures, electrical shock or fire can occur.
If you dropped the product or the case is broken, turn off the product and unplug the power cord.
- If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable
objects such as paper and matches. Children must pay particular attention.
- Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and
contact the service center.
Caution
Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more
than 10cm from the wall)
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
Do not block the ventilation hole of the product by a tablecloth or curtain.
- The product can be deformed or fire can break out due to overheating inside the product.
Install the product on a flat and stable place that has no risk of dropping the product.
- If the product is dropped, you may be injured or the product may be broken.
Install the product where no EMI occurs.
Keep the product away from direct sunlight.
- The product can be damaged.
1

Advertisement

Table of Contents
loading

Related Manuals for LG M1721A-BZ

Summary of Contents for LG M1721A-BZ

  • Page 1: Safety Precautions

    Safety Precautions Please read these safety precautions carefully before using the product. If you ignore the warning message, you may be seriously injured or there is a possibility of Warning accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Product Warning Keep away from heat sources like electrical heaters.

  • Page 2: Precautions In Moving The Product

    Safety Precautions Electrical Power Related Precautions Warning Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The product can be damaged, or you may be electrocuted. During a thunder or lightning storm, unplug the power cable or signal cable.
  • Page 3 Safety Precautions Caution Do not shock the product when moving it. - You may be electrocuted or the product can be damaged. Do not dispose the product-packing box. Use it when you move. Make the panel face forward and hold it with both hands to move. - If you drop the product, the damaged product can cause electric shock or fire.

  • Page 4: Before Connecting To The Pc

    Before Connecting to the PC Connecting the stand Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Place the monitor with its front facing downward on a soft cloth. Connect the Stand Base to the Stand Body and press latches at the button toward each end.

  • Page 5: Positioning Your Display

    Before Connecting to the PC Before setting up the product, ensure that the power supply, the computer system, and other attached devices is turned off. Positioning your display Adjust the position of the panel in various ways for maximum comfort. Tilt Range : -5˚~15˚...

  • Page 6: Name And Function Of The Parts

    Name and Function of the Parts Name of the Remote Control Buttons (Atype) MUTE POWER INPUT I/II LIST Q.VIEW MENU NOTE : In case of weak stereo sound signals, with stereo or Nicam stereo transmission, select mono reception. Inserting batteries into remote control. 1.

  • Page 7: Number Buttons

    Name and Function of the Parts MUTE POWER INPUT I/II LIST Q.VIEW MENU SLEEP TEXT UPDATE TIME SIZE LIST : Programme list To display the programme list (0~ 99). Programme List C 01 C 35 C 05 C 11 C 04 OK MENU Note: TV channels displayed in blue have been setup to be skipped in the Programme Edit menu.
  • Page 8 Name and Function of the Parts Remote Control - Using the Teletext function Please select your local teletext language. (page A28) If you don't, the teletext may not appear correctly on the screen. LIST Q.VIEW MENU SLEEP TEXT UPDATE TIME SIZE HOLD REVEAL...
  • Page 9 Name and Function of the Parts Remote Control - Using the Teletext function SLEEP TEXT UPDATE TIME SIZE HOLD REVEAL INDEX MODE UPDATE Press the button to appear the TV programme. At the top of screen indicates that you are still in the teletext mode.
  • Page 10 Name and Function of the Parts Name of the Remote Control Buttons (Btype) POWER INPUT MUTE LIST Q.VIEW TEXT HOLD SIZE TIME REVEAL INDEX UPDATE MODE Inserting batteries into remote control. 1. Take out the battery cap. 2. Insert the batteries with correct polarity (+/-). 3.

  • Page 11: Name Of The Remote Control Buttons

    Name and Function of the Parts Name of the Remote Control Buttons POWER INPUT MUTE LIST Q.VIEW TEXT HOLD TIME SIZE REVEAL INDEX UPDATE MODE I/II : Bilingual choice and sound mode selection [TV] To switch from Stereo to Mono sound in case of stereo transmission, or from Nicam Stereo to Nicam Mono, in case of digital transmission.
  • Page 12 Name and Function of the Parts Name of the Remote Control Buttons LIST Q.VIEW TEXT HOLD SIZE TIME REVEAL INDEX MODE UPDATE PR ( ) Buttons Able to change channel. VOL ( ) Buttons Able to adjust sound. OK Button Use when functional adjustment is completed.
  • Page 13 Name and Function of the Parts Remote Control - Using the Teletext function Please select your local teletext language. (page 28) If you don't, the teletext may not appear correctly on the screen. TEXT HOLD SIZE TIME REVEAL INDEX UPDATE MODE Yellow key Favourite Program On : Rotate favourite channel...
  • Page 14 Name and Function of the Parts Remote Control - Using the Teletext function TEXT HOLD SIZE TIME REVEAL INDEX UPDATE MODE REVEAL Press the button to reveal/conceal the hidden information, such as solutions to riddles and puzzles. Press this button again to remove the information from the display.

  • Page 15: Rear View

    Name and Function of the Parts Rear View Power Connector : Connect the power cord. SCART Input/Output Terminal AV Input Terminal D-Sub Analog Signal Connector RGB Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack. TV Tuner Jack : Connect the antenna.
  • Page 16 Name and Function of the Parts AV Input Terminal (RGB) IN AUDIO VIDEO S-VIDEO (Mono) AV IN 2 Video Input Terminal Audio Input Terminal S-Video Input Terminal...

  • Page 17: Connecting To External Devices

    Connecting to External Devices Connecting to your PC First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. Rear side of the product. Connecting with the D-Sub signal input cable. RGB (PC/DTV) IN Rear side of the product.
  • Page 18 Connecting to External Devices Connect the power cord. Turn on power by pressing the power button on the product. INPUT MENU Power button Turn on the PC. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the INPUT button at the top side of the product.

  • Page 19: Connecting To Vcr/Dvd

    Connecting to External Devices Connecting to VCR/DVD Connect the video/audio cable as shown in the figure below and then connect the power cord (See page 18). When using the RCA cable. Connect the input terminal with a • proper colour match. Rear side of the Product VIDEO AUDIO...
  • Page 20 Connecting to External Devices When using the SCART cable. Rear side of the Product VCR / DVD Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the INPUT button at the topside of the product. INPUT When connecting with a RCA cable.

  • Page 21: Connecting To Dvd/Set-Top Box

    Connecting to External Devices Connecting to DVD/SET-TOP BOX Connect the D-sub cable, RCA/PC cable as shown in the below figure and then connect the power cord. (see page 18) [Rear side of the Product] D-Sub cable Select an input signal. Press the INPUT button on the remote control to select the input signal.

  • Page 22: When Watching Tv

    Connecting to External Devices When Watching TV Check if the antenna cable is connected at the rear side of the product and then, connect the power cord. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT Or, press the INPUT button at the top side of the product.

  • Page 23: To Arrange Cables Using Cable Management

    To arrange cables using cable management Arrange the cables in the center as shown in the following picture. Fit the cable management to the Holder Groove downwards. Hold the cable management and lift up slightly to remove it. Warning • Do not use the cable management as a handle for the Monitor. •...

  • Page 24: Adjusting The Screen

    Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit INPUT MENU • This Indicator lights up green when the display operates normally Power Indicator (On Mode). If the display is in Sleep (Energy Saving) Mode, this indicator colour changes to red. Power Button •...

  • Page 25: Input Button

    Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit • OK button is usually used in choosing the MENU. OK Button When there is no MENU on the screen pushing the OK button will give the information about the current input source. INPUT Button Each time you press the Input button it will change to TV If nothing is inputted for several seconds the screen will automatically move to the selected menu.

  • Page 26: Osd (On-Screen Display) Menu

    Adjusting the Screen OSD (On Screen Display) Menu Icon Function Description Set/Select the channel when using the TV Station Adjusting the picture function. Picture Adjusting the sound function. Sound Adjusting the time function. Time Selecting the special function. Special Adjusting the screen function. Screen Note OSD(On Screen Display)

  • Page 27: Osd (On Screen Display) Screen Tracking Order

    Adjusting the Screen OSD (On Screen Display) Screen Tracking Order A type MENU Pop up the Move where you want to menu screen adjust B type Pop up the Move where you want to menu screen adjust Press the MENU Button, then the main menu of the OSD will appear. To access a control, use the When the icon you want becomes highlighted, press the OK Button.

  • Page 28: On-Screen Menu Language / Country Selection

    Adjusting the Screen On-Screen Menu Language / Country Selection Installation guide menu appears on product screen when it is turned on for the first time. I n s t a l l a t i o n g u i d e Language Chesky Dansk...

  • Page 29: Station Id Set/Select The Channel When Using The Tv

    Adjusting the Screen STATION ID set/Select the channel when using the TV Auto programme Station Auto programme Manual programme Programme edit Favourite programme OK MENU System It should be set before run auto searching. Press the world from where you want to receive the TV channels. * Supporting channel : C(V/UHF 02~69) S(Cable 01~41) BG : PAL B/G, SECAM B/G (Europe/East Europe) I : PAL I/II (U.K/Ireland)
  • Page 30 Adjusting the Screen STATION ID set/Select the channel when using the TV Press the Band cable channels. To select the channel reception type. : VHF/UHF / Cable. If you know the channel number, enter it directly with the digit buttons 0 to Channel In case of poor reception, you can improve the reception by fine tuning.
  • Page 31 Adjusting the Screen STATION ID set/Select the channel when using the TV Favourite Station programme Auto programme Manual programme Programme edit Favourite programme OK MENU This function lets you select your favourite programmes directly. (8 channel) Press the Yellow key Favourite Program On : Rotate favourite channel Favourite Program Off : To display the previously selected TV channel.
  • Page 32 Adjusting the Screen PICTURE ID adjust the picture function Picture Dynamic Standard Reset Mild Game User OK MENU Picture 9300K Reset 6500K sRGB User OK MENU Reset Return to the default settings PSM, CSM at the factory. (RGB-PC) The PSM function automatically adjusts the screen image quality.
  • Page 33 Adjusting the Screen PICTURE ID adjust the picture function (TV/Video/RGB-DTV) Picture Dynamic Standard Reset Mild Game User OK MENU Picture Cool Reset Normal Warm User OK MENU Return to the default settings PSM, CSM at the factory. Reset OK MENU The PSM function automatically adjusts the screen image quality.

  • Page 34: Sound Id To Adjust The Sound Function

    Adjusting the Screen SOUND ID to adjust the sound function Sound Balance OK MENU The best sound tone quality will be selected automatically depending on the video type that you're currently watching. • Flat : The most commanding and natural audio. •...

  • Page 35: Time Id To Adjust The Time Function

    Adjusting the Screen TIME ID to adjust the time function Time Clock Off time On time Auto sleep OK MENU This function is used to set up of current time. Clock You must set the time correctly before using On/Off time function. 1) Press the MENU button and then use 2) Press the 3) Press...

  • Page 36: Special Id To Select The Special Function

    Adjusting the Screen SPECIAL ID to Select the special function Special Language Country Child lock DDC-CI OK MENU To choose the language in which the control names are displayed. Language Country Please select your local teletext language. If you don't, the teletext may not appear correctly on the screen. This feature is not available in all countries.

  • Page 37: Screen Id To Adjust The Screen Function

    Adjusting the Screen SCREEN ID to adjust the screen function Screen Auto config. Manual config. Reset OK MENU Auto This button is for the automatic adjustment of the screen Position, Clock and Phase. (It is not working in RGB) config. Manual This button is for the manual adjustment of the screen Position, Clock and Phase.

  • Page 38: Troubleshooting

    Troubleshooting No image is displayed G Is the product's power cord connected? G Is the power indicator turning on? G Power is on, power indicator is green but the screen appears extremely dark. G Does the power indicator look red? G Does the 'Out of range' message appear? G Does the 'Check signal cable'...

  • Page 39: The Screen Image Looks Abnormal

    Troubleshooting The screen image looks abnormal. G Is the screen position wrong? G Do thin lines appear on the background screen? G Horizontal noise appears or the characters look blurred. After-image appears on the product. G After-image appears when the product is turned off.

  • Page 40: The Audio Function Does Not Work

    Troubleshooting The audio function does not work. G No sound? G Sound is too low. The TV function does not work. G The TV signal is not being received. Screen colour is abnormal. G Screen has poor colour resolution (16 colours).

  • Page 41: Specifications

    Specifications The product specifications can change without prior notice for product improvement. [17 inch] LCD Panel Screen Type Pixel Pitch Video Signal Max. Resolution Recommended Resolution 1280 X 1024 @60 Hz Horizontal Frequency Vertical Frequency Synchronization Type Separate Input Connector Power Rated Voltage Power Consumption...
  • Page 42 The product specifications can change without prior notice for product improvement. [19 inch] LCD Panel Screen Type Pixel Pitch Video Signal Max. Resolution Recommended Resolution 1280 X 1024 @60 Hz Horizontal Frequency Vertical Frequency Synchronization Type Separate Input Connector Power Rated Voltage Power Consumption Tilt...

  • Page 43: Power Indicator

    PC Mode – Preset Mode [17 inch] [19 inch] Horizontal Preset mode Frequency (kHz) 31.469 640 x 350 31.468 720 x 400 31.469 640 x 480 VESA 37.500 640 x 480 VESA 37.879 800 x 600 VESA 46.875 800 x 600 49.725 832 x 624 Power Indicator...

  • Page 44: Vesa Wall Mounting

    VESA wall mounting This product meets VESA-compliant mounting interface pad specifications. Put the product on a piece of cloth or other soft surface with the front side facing downward. Pullout the stand as shown in the picture. Fasten the screw on the backside of the product and the other one in the joint of the stand. Install the VESA standard wall mounting.

Table of Contents