Table of Contents
Related Manuals for LG HX806SHW
Summary of Contents for LG HX806SHW
- Page 1 OWNER’S MANUAL 3D / 2D Blu-ray Disc WIRELESS HOME CINEMA SYSTEM Please read this manual carefully before operating your set and retain it for future reference. HX806SHW (HX806SHW, SH86SH-F/ S/ C, SH95TA-W, W86) P/NO : SAC35234201...
- Page 3 Getting Started Safety Information CAUTION CAUTION: This product employs a Laser System. RISK OF ELECTRIC SHOCK To ensure proper use of this product, please read DO NOT OPEN this owner’s manual carefully and retain it for future CAUTION: TO REDUCE THE RISK OF ELECTRIC reference. Shall the unit require maintenance, SHOCK DO NOT REMOVE COVER (OR BACK) NO contact an authorized service center. USER-SERVICEABLE PARTS INSIDE REFER SERVICING Use of controls, adjustments or the performance of TO QUALIFIED SERVICE PERSONNEL. procedures other than those specified herein may result in hazardous radiation exposure. This lightning flash with arrowhead To prevent direct exposure to laser beam, do not try symbol within an equilateral triangle to open the enclosure. Visible laser radiation when is intended to alert the user to the open. DO NOT STARE INTO BEAM. presence of uninsulated dangerous CAUTION concerning the Power Cord voltage within the product’s Most appliances recommend they be placed upon enclosure that may be of sufficient magnitude to a dedicated circuit; constitute a risk of electric shock to persons.
- Page 4 Getting Started For Wireless product European Union Notice This device is equipped with a portable battery or accumulator. LG Electronics hereby Safety way to remove the battery or the declares that this/ battery from the equipment: Remove the these product(s) is/are old battery or battery pack, follow the steps in compliance with the essential requirements and in reverse order than the assembly. To prevent other relevant provisions of Directive 1999/5/EC, contamination of the environment and bring on 2004/108/EC, 2006/95/EC and 2009/125/EC. possible threat to human and animal health, the Please contact to the following address for old battery or the battery put it in the appropriate obtaining a copy of the DoC (Declaration of container at designated collection points. Do Conformity). not dispose of batteries or battery together with European representative : LG Electronics Service other waste. It is recommended that you use...
- Page 5 Getting Started Notes on Copyrights Important Notice for TV colour system y Because AACS (Advanced Access Content System) is approved as content protection The colour system of this player differs according to system for BD format, similar to use of CSS currently playing discs. (Content Scramble System) for DVD format, For example, when the player plays the disc certain restrictions are imposed on playback, recorded in the NTSC colour system, the image is analog signal output, etc., of AACS protected output as an NTSC signal. contents. The operation of this product and Only the multi system colour TV can receive all restrictions on this product may vary depending signals output from the player. on your time of purchase as those restrictions may be adopted and/or changed by AACS after y If you have a PAL colour system TV, you will see the production of this product. just distorted images when using discs or video contents recorded in NTSC. y Furthermore, BD-ROM Mark and BD+ are additionally used as content protection systems y The multi system colour TV changes the colour for BD format, which imposes certain restrictions system automatically according to input signals.
-
Page 6: Table Of Contents
– Playing a Disc – About DLNA – Playing a file on a disc/USB device – Certain System Requirements – Playing Blu-ray 3D disc – LG Remote – Enjoying BD-Live – Compatibility Notes – Playing a file on a network server Remote control –... - Page 7 Table of Contents Audio CD Recording Displaying MP3 music information (ID3 Tag) Radio Operations – Listening to the radio – Presetting the Radio Stations – Deleting all the saved stations – Deleting a saved station – Improving poor FM reception –...
-
Page 8: Getting Started
Getting Started Introduction Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. y “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Movie, Music or Photo files. y ISO 9660+JOLIET, UDF and UDF Bridge format y Discs such as movies that can be purchased or rented. y Video mode and finalized only DVD-ROM y Supports the dual layer disc also DVD-R DVD-RW Finalized AVCHD format DVD+R DVD+RW y DVD±R/RW discs that contain Movie, Music or (8 cm / 12... -
Page 9: About The "7" Symbol Display
BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens. y If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in which it may not play because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) y This player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. y Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions to ensure compatible playback. y Customers should note that permission is required in order to download MP3/ WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. y You have to set the disc format option to [Mastered] in order to make the discs compatible with the LG players when formatting rewritable discs. When setting the option to Live System, you cannot use it on LG player. (Mastered/Live File System : Disc format system for windows Vista) -
Page 10: File Compatibility
Getting Started File compatibility Movie files File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.mpg”, “DIVX3.xx”, “DIVX4. “Dolby Digital”, SubRip (.srt/.txt), SAMI (.smi), “.mpeg”, “.mkv”, xx”, “DIVX5.xx”, “XVID”, “DTS”, “MP3”, SubStation Alpha (.ssa/.txt), “.mp4”, “.asf”, “DIVX6.xx” (Standard “WMA”, “AAC”, MicroDVD (.sub/.txt), VobSub Disc, “.wmv”, “.m4v” playback only), H.264/ “AC3” (.sub), SubViewer 1.0 (.sub), (DRM free) MPEG-4 AVC, MPEG1 SubViewer 2.0 (.sub/.txt), TMPlayer SS, MPEG2 PS, MPEG2 (.txt), DVD Subtitle System (.txt) “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt/.txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx... -
Page 11: Avchd (Advanced Video Codec High Definition)
Getting Started Note Note y The file name is limited to 180 characters. y This player supports UTF-8 files even it contains Unicode subtitle contents. This y A “avi” file which is encoded “WMV 9 codec” player can not support the pure Unicode is not supported. subtitle files. y Depending on the size and number of the y Depending on the types of file or ways of files, it may take several minutes to read the recording, it may not play back. contents on the media. y A disc which was recorded by multi-session y File compatibility may differ depending on on normal PC is not supported on this the server. player. y Because the compatibility on DLNA server y To be playback a movie file, movie file name are tested on the bundle DLNA server (Nero and Subtitle file name must be the same. MediaHome 4 Essentials) environment, file requirements and playback functions may y If video codec is MPEG2 TS or MPEG2 PS, differ depending on media servers. subtitle does not play back. y The file requirements on page 10 are not y The total playback time of music file always compatible. There may have some... -
Page 12: About Dlna
HDMI-capable input or HDCP-capable DVI input y High definition display that has HDMI input jacks. on your display device. y BD-ROM disc with high definition content. y Some BD-ROM and DVD discs may restrict the y HDMI or HDCP capable DVI input on your display use of some operation commands or features. device is required for some content (as specified y Dolby TrueHD, Dolby Digital Plus and DTS-HD are by disc authors). supported with maximum 5.1 channels if you For Dolby® Digital Plus, Dolby TrueHD and DTS-HD use HDMI connection for the audio output of the multi-channel audio playback: unit. y An amplifier/receiver with a built-in (Dolby y You can use a USB device to store some discs Digital, Dolby Digital Plus, Dolby TrueHD, DTS or related information, including downloaded on- DTS-HD) decoder. line content. The disc you are using will control y Main, center, surround speakers and subwoofer how long this information is retained. as necessary for chosen format. LG Remote You can control this player with your iPhone or Android phone via your home network. This player and your phone must be connected to your wireless network device such as access point. Visit “Apple iTunes” or “Google Apps Marketplace” for detailed information of “LG Remote”. -
Page 13: Remote Control
Getting Started Remote control • • • • • • a • • • • • • • • • • • • c • • • • • RADIO&INPUT (P): Changes SPEAKER LEVEL: Sets the sound input mode. level of desired speaker. MARKER: Marks any point during SOUND EFFECT: Selects a sound playback. -
Page 14: Front Panel
Getting Started Front panel c PORT.IN a 1/' (POWER) Button USB Port b R (OPEN/CLOSE) d Volume control T (PLAY/PAUSE) I (STOP) Y/U,(SKIP) FUNC. (Function) Changes the input source or function. Rear panel e AUX (R/L) IN/VIDEO OUT a Speakers connectors b Cooling Fan f HDMI OUT (Type A, HDMI™ Connector) Connect to TV with HDMI inputs. c Antenna Connector g LAN port d OPTICAL IN... -
Page 15: Connecting
Connecting Speaker Connection Attaching the rear speakers to the wireless receiver Connect the rear speakers to the wireless receiver Attaching the speakers to the with the speaker cables. player Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire Connect the wires hooked up to the speaker to the goes in to the terminal marked “+” (plus). unit. - To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. - Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). About Ferrite Core (for EMI only) Be sure to attach the ferrite core to the speaker cable. This ferrite core can reduce noises. -
Page 16: Wireless Connection
Connecting Wireless connection Positioning the system When you turn on the player, the wireless The following illustration shows an example of connection will be completed automatically. positioning the system. Note that the illustrations When the connection is completed, you can see in these instructions differ from the actual unit for the icon ( ) on the display window. explanation purposes. For the best possible surround sound, all the LED indicator of wireless receiver speakers other than the subwoofer should be placed at the same distance from the listening LED Color Operation position ( The connection is not Blue (Blink) completed. Blue The connection is completed. The connection is in standby mode or failed. Off The AC power cord is unplugged. (No display) Note y Be sure to match the speaker, cable to the appropriate terminal on the unit: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. -
Page 17: Connecting To Your Tv
Connecting Connecting to Your TV HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Make one of the following connections, depending Speed HDMI Cable). Connect the HDMI jack on on the capabilities of your existing equipment. the player to the HDMI jack on a HDMI compatible y HDMI connection (page 17) TV or monitor. y Video connection (page 18) Note y Depending on your TV and other Rear of the unit equipment you wish to connect, there are various ways you could connect the player. Use only one of the connections described in this manual. y Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. y Do not connect your player via your VCR. Type A, High Speed The image could be distorted by the copy HDMI™ Cable protection system. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Additional Information for HDMI y When you connect a HDMI or DVI compatible device make sure of the following: - Try switching off the HDMI/DVI device and... -
Page 18: What Is Simplink
Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the player and then turn it on again. y When the HDMI connection with HDCP is not verified, TV screen is changed to black screen. In this case, check the HDMI connection, or disconnect the HDMI cable. y If there are noises or lines on the screen, please check the HDMI cable (length is generally limited to 4.5 m(15 ft.)). What is SIMPLINK? Resolution Setting Some functions of this unit are controlled by the TV’s remote control when this unit and LG TV’s with The player provides several output resolutions for SIMPLINK are connected through HDMI connection. HDMI OUT. You can change the resolution using [Setup] menu. Controllable functions by LG TV’s remote control; Play, Pause, Scan, Skip, Stop, Power Off, etc. 1. Press HOME (n). Refer to the TV owner’s manual for the details of 2. Use A/D to select the [Setup] and press ENTER SIMPLINK function. (b). The [Setup] menu appears. LG TV’s with SIMPLINK function has the logo as 3. Use W/S to select [DISPLAY] option then shown above. -
Page 19: Antenna Connection
Connecting Antenna connection 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. Connect the supplied antenna for listening to the radio. 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. Rear of the unit Note y If your TV does not accept the resolution you have set on the player, you can set resolution to 576p as follows: 1. Press B to open the disc tray. Note 2. Press Z (STOP) for more than 5 seconds. y After connecting the FM wire antenna, keep it as horizontal as possible. Be sure to fully y When you set the resolution to 576i with extend the FM wire antenna. HDMI connection, actual resolution is outputted to 576p. y If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. y If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. -
Page 20: Connections With External Device
Connecting Connections with external OPTICAL IN Connection device You can enjoy the sound of your component with the digital optical connection from the speakers of the system. AUX Connection Connect the optical output jack of your component You can enjoy the sound of your component with into the OPTICAL IN jacks on the unit. And then the analogue audio output jacks from the speakers select the [OPTICAL IN] option by pressing of the system. RADIO&INPUT(P) and ENTER (b) Or press Connect the analogue audio output jacks of your OPTICAL to select directly. component into the AUX R/L (INPUT) on this unit. You can also use FUNC. button on the front panel And then select the [AUX] option by pressing to select the input mode. RADIO&INPUT (P) and ENTER (b). You can also use FUNC. button on the front panel to select the input mode. Rear of the unit To the digital optical output jack of your component Red White To the audio output jacks of your component (TV, VCR, etc.) PORT. IN Connection You can enjoy the sound of your portable audio player from the speakers of the system. -
Page 21: Connecting To Your Home Network
Connecting Note Connecting to your y When plugging or unplugging the LAN Home Network cable, hold the plug portion of the cable. When unplugging, do not pull on the LAN cable but unplug while pressing down on This player can be connected to a local area the lock. network (LAN) via the LAN port on the rear panel. y Do not connect a modular phone cable to By connecting the unit to a broadband home the LAN port. network, you have access to services such as y Since there are various connection software updates, BD-Live interactivity and configurations, please follow the streaming services. specifications of your telecommunication carrier or internet service provider. Wired network connection y If you want to access content from DLNA Using a wired network provides the best servers, this player must be connected to performance, because the attached devices the same local area network with them via a connect directly to the network and are not subject router. to radio frequency interference. Please refer to the documentation for your network device for further instructions. -
Page 22: Wired Network Setup
Connecting Wired Network Setup connection. Select [OK] and press ENTER (b) to complete the network connection. If there is a DHCP server on the local area network 6. If you select [Test] and press ENTER (b) at (LAN) via wired connection, this player will step 5 above, the network connection status is automatically be allocated an IP address. After displayed on the screen. making the physical connection, a small number of You can also test it on the [Connection Status] home networks may require the player’s network in the [Setup] menu. setting to be adjusted. Adjust the [NETWORK] setting as follow. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). Notes on Network Connection: y Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. 2. Select [Yes] and press ENTER (b) to continue. y Depending on the internet service provider (ISP), The new connection settings reset the current the number of devices that can receive internet... -
Page 23: Usb Device Connection
Connecting USB device connection be possible due to certain restrictions set by the Internet service provider (ISP) supplying your broadband Internet connection. This player can play movie, music and photo files y Any fees charged by an ISP including, without contained in the USB device. limitation, connection charges are your responsibility. Playback content in the USB y A 10 Base-T or 100 Base-TX LAN port is required device for wired connection to this player. If your internet service does not allow for such a 1. Insert a USB device to the USB port until it fits connection, you will not be able to connect the into place. player. y You must use a Router to use xDSL service. y A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this player or you may be limited When you connect the USB device on the HOME to the number of devices you can connect at menu, the player plays a music file contained in the the same time. (If your ISP limits subscription to USB storage device automatically. If the USB storage one device, this player may not be allowed to... - Page 24 Connecting Note y This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live and Audio CD recording, only FAT16 and FAT32 formats are supported. Use the USB flash drive/ external HDD formatted in either FAT16 or FAT32 when using BD-Live and Audio CD recording. y The USB device can be used for the local storage for enjoying BD-Live discs with Internet. y This unit can support up to 4 partitions of the USB device. y Do not extract the USB device during operation (play, etc.). y A USB device which requires additional program installation when you have connected it to a computer, is not supported. y USB device: USB device that supports USB1.1 and USB2.0. y Movie, music and photo files can be played. For details of operations on each file, refer to relevant pages. y Regular back up is recommended to prevent data loss. y If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized.
-
Page 25: System Setting
System Setting Settings [DISPLAY] Menu TV Aspect Ratio Adjust the Setup Settings Select a TV aspect ratio option according to your TV type. You can change the settings of the player in the [Setup] menu. [4:3 Letter Box] 1. Press HOME (n). Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. [16:9 Original] Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear 3. Use W/S to select the first setup option, and... - Page 26 System Setting Resolution HDMI Color Setting Sets the output resolution HDMI video signal. Refer Select the type of output from the HDMI OUT jack. to page 18 for details about the resolution setting. For this setting, please refer to the manuals of your display device. [Auto] [YCbCr] If the HDMI OUT jack is connected to TVs providing display information (EDID), Select when connecting to a HDMI display automatically selects the resolution best suited device. to the connected TV. [RGB] [1080p] Select when connecting to a DVI display Outputs 1080 lines of progressive video. device. [1080i] 3D Mode Outputs 1080 lines of interlaced video. Select the type of output mode for Blu-ray 3D disc [720p] playback. Outputs 720 lines of progressive video. [Off] [576p] Blu-ray 3D disc playback will output as 2D Outputs 576 lines of progressive video. mode like a normal BD-ROM disc playback. [576i] [On] Outputs 576 lines of interlaced video. Blu-ray 3D disc playback will output as 3D mode.
-
Page 27: [Language] Menu
[LANGUAGE] Menu [Distance] Adjust the distance between each speaker and Display Menu the listening position. Select a language for the [Setup] menu and on- [Test/ Stop test tone] screen display. The speakers will emit a test tone. Disc Menu/Disc Audio/ [OK] Disc Subtitle Confirms the setting. Select the language you prefer for the audio track [Cancel] (disc audio), subtitles, and the disc menu. Cancels the setting. [Original] HD AV Sync Refers to the original language in which the disc was recorded. Sometimes Digital TV encounters a delay between picture and sound. If this happens you can [Other] compensate by setting a delay on the sound so Press ENTER (b) to select another language. that it effectively ‘waits’ for the picture to arrive: this Use number buttons then press ENTER (b) is called HD AV Sync. Use W/S to scroll up and to enter the corresponding 4-digit number down through the delay amount, which you can... -
Page 28: [Lock] Menu
System Setting Connect wireless speakers [LOCK] Menu When the unit is manufactured, the ID is already The [LOCK] settings affect only Blu-ray Disc and set. If interference occurs or you use a new wireless DVD playback. unit, an ID should be set again. To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so. Enter a 4-digit password twice, and press ENTER (b) to create a new password. Password You can create or change the password. When the [Wireless Speaker Connection Guide] [None] appears, press the PAIRING button on the receiver. Enter a 4-digit password twice, and press - If you see the blue LED indicator light on the ENTER (b) to create a new password. wireless receiver, the pairing was successful. Select the [Speaker test] to test the connection. [Change] Enter the current password and press ENTER DRC (Dynamic Range Control) (b). Enter a 4-digit password twice, and press This function allows you to listen to a movie at a ENTER (b) to create a new password. lower volume without losing clarity of sound. If you forget your password [Off] If you forget your password, you can clear it using the following steps:... -
Page 29: [Network] Menu
System Setting BD Rating [NETWORK] Menu Set an age limit of BD-ROM play. Use number The [NETWORK] settings are needed to use the buttons to input an age limit for BD-ROM viewing. software update, BD Live and NetCast features. [255] Connection Setting All BD-ROM can be played. If your home network environment is ready to connect the player, the player needs to be [0-254] set the wired network connection for network Prohibits play of BD-ROM with corresponding communication. (See “Connecting to your Home ratings recorded on them. Network” on page 21.) Note Connection Status The [BD Rating] will be applied only for the BD that containing the Advanced Rating Control. If you want to check the network status on this player, select the [Connection Status] options and press ENTER (b) to check whether a connection Area Code to the network and the internet have been established. Enter the code of the area whose standards were used to rate the DVD video disc, based on the list BD-LIVE connection on page 54. You can restrict Internet access when BD-Live functions are used. -
Page 30: [Others] Menu
System Setting Note [OTHERS] Menu If you reset the player to its original factory settings using [Factory Set] option, you have DivX® VOD to set all the activation for the on-line services ABOUT DIVX VIDEO: DivX® is a digital video format and network settings again. created by DivX, Inc. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more Software information and software tools to convert your files into DivX video. [Information] ABOUT DIVX VIDEO-ON-DEMAND: This DivX Displays the current software version. Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. [Update] To obtain your registration code, locate the DivX You can update the software by connecting VOD section in your device setup menu. Go to vod. the unit directly to the software update server divx.com for more information on how to complete (see page 51). your registration. [Register] Disclaimer Notice Displays the registration code of your player. Press ENTER (b) to view the notice of Network Service Disclaimer on page 61. [Deregister] Deactivate your player and display the deactivation code. Note All the downloaded videos from DivX VOD with this player’s registration code can only be played back on this unit. -
Page 31: Sound Effect
System Setting Sound Effect You can select a suitable sound mode. Press SOUND EFFECT repeatedly until the desired mode appears on the front panel display or the TV screen. The displayed items for the equalizer maybe diff erent depending on sound sources and effects. [Natural Plus]: You can enjoy the natural sound effect same as 5.1 channel. [NATURAL]: You can enjoy comfortable and natural sound. [Bypass]: Software with multichannel surround audio signals is played according to the way it was recorded. [BASS BLAST]: Reinforce the bass sound effect from front left and right speaker and subwoofer. [Up scaler]: When listening to MP3 files or other compressed music, you can enhance the sound. This mode is available only to 2 channel sources. [Loudness]: Improves bass and treble sound. [User EQ]: You can adjust the sound by raising or lowering the level of specific frequency. Setting the [User EQ] 1. Use W/S to select the desired frequency. 2. Use A/D to select the desired level. Select [Cancel] option then press ENTER (b) to cancel the setting. -
Page 32: Operating
Operating Note General Playback y Playback functions described in this manual are not always available in every file and media. Some functions can be restricted Using [HOME] menu depending on many factors. y Depending on the BD-ROM titles, a USB The home menu appears when you press HOME device connection may be needed for the (n). Use A/D to select a category and press proper playback. ENTER (b). y Unfinalized DVD VR format discs may not be played in this player. y Some DVD-VR discs are made with CPRM data by DVD RECORDER. This unit cannot support these kinds of discs. Playing a file on a disc/USB device This player can play video, audio and photo files contained in the disc or USB device. a [Movie] - Plays video contents. 1. Insert a data disc on the tray or connect a USB b [Photo] - Plays photo contents. -
Page 33: Playing Blu-Ray 3D Disc
Operating Playing Blu-ray 3D disc Enjoying BD-Live This player can play the Blu-ray 3D discs which BD-Video supporting BD-Live (BD-ROM version 2 contains separate views for the left and right eyes. Profile 2) that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this Preparation unit to the internet. In order to playback Blu-ray 3D title in 1. Check the network connection and settings stereoscopic 3D mode, you need to: (page 21). y C heck your TV is 3D capable and has HDMI 2. Insert a USB storage device to the USB port on 1.4 input(s). the front panel. y W ear 3D glasses to enjoy the 3D experience A USB storage device is needed to download if it is necessary. bonus content. y C heck whether the BD-ROM title is the Blu- 3. Press HOME (n), and set the [BD-LIVE ray 3D disc or not. -
Page 34: Playing A File On A Network Server
Operating Playing a file on a network server This player can play video, audio and photo files located in a DLNA server through your home network. 1. Check the network connection and settings (page 21). 2. Press HOME (n). 3. Select [Movie], [Photo] or [Music] using A/D, and press ENTER (b). 4. Select a DLNA media server or a share folder on your PC on the list using W/S, and press ENTER (b). If you want to rescan available media server, press the green (G) colored button. 5. Select a file using W/S/A/D, and press ENTER (b) to play the file. Note y The file requirements are described on page y The thumbnail of the unplayable files can be displayed, but those cannot be played on this player. y The subtitle file name and movie file name have to be the same and located at the same folder. y The playback and operating quality may be affected by your home network condition. -
Page 35: Basic Operations For Video And Audio
Operating Basic operations for video and Basic operations for photo audio content content To stop playback To play a slide show Press Z (STOP) while playback. Press d (PLAY) to start slide show. To pause playback To stop a slide show Press M (PAUSE) while playback. Press Z (STOP) while slide show. Press d (PLAY) to resume playback. To pause a slide show To play frame-by-frame (Video) Press M (PAUSE) while slide show. -
Page 36: Advanced Playback
Operating Note Note y The resume point may be cleared when a y If you press V once during Repeat Chapter/ button is pressed (for example; 1 (POWER), Track playback, the repeat playback cancels. B (OPEN/CLOSE), etc). y This function may not work on some disc or y On BD-Video discs with BD-J, the resume title. playback function does not work. y If you press Z (STOP) once during BD-ROM interactive title playback, the unit will be in Repeating a specific portion Complete Stop mode. erot Advanced Playback This player can repeat a portion you have selected. 1. While playback, press REPEAT (h) to select [A-] at the beginning of the portion you wish to Repeat Playback repeat. 2. Press ENTER (b) at the end of the portion. Your erotu, selected portion will be repeated continually. 3. To return to normal playback, press REPEAT (h) repeatedly to select [Off ]. -
Page 37: Marker Search
Operating Marker Search Using the search menu eroy eroy You can start playback from up to nine memorized Using search menu, you can easily to find the point points. where you want to start playback. To enter a marker To search a point 1. While playback, press MARKER at the desired 1. During playback, press SEARCH to display the point. The Marker icon appears on the TV screen search menu. briefly. 2. Repeat step 1 to add up to nine markers. To recall a marked scene 2. Press A/D to skip the playback 15 seconds forward or backward. You can select a point that 1. Press SEARCH and the search menu appears on you want to skip by pressing and holding A/ the screen. -
Page 38: Changing Content List View
Operating Changing content list view Viewing content information On the [Movie], [Music] or [Photo] menu, you can The player can display the content information. change the content list view. 1. Select a file using W/S/A/D. 2. Press INFO/DISPLAY (m) to display the option Method 1 menu. Press red (R) colored button repeatedly. 3. Select the [Information] option using W/S, and press ENTER (b). The file information appears on the screen. While movie playback, you can display the file information by pressing TITLE/POPUP. Note The information displayed on the screen may not correct comparing actual content information. Selecting a subtitle file If the subtitle file name is different from the movie file name, you need to select the subtitle file on the [Movie] menu before playing the movie. 1. Use W/S/A/D to select the subtitle file you wish to play in the [Movie] menu. 2. Press ENTER (b). Method 2 Press ENTER (b) again to deselect the subtitle file. Selected subtitle file will be displayed when... -
Page 39: Last Scene Memory
Operating Last Scene Memory Options while viewing a photo This unit memorizes the last scene from the last disc You can use various options during viewing a that is viewed. The last scene remains in memory photo in full screen. even if you remove the disc from the unit or switch 1. While viewing a photo in full screen, press INFO/ off the unit. If you load a disc that has the scene DISPLAY (m) to display the option menu. memorized, the scene is automatically recalled. 2. Select an option using W/S. Note y Last Scene Memory function for a previous disc is erased once a different disc is played. y This function may not work depending on the disc. y On BD-Video discs with BD-J, the last scene memory function does not work. y This unit does not memorize settings of a disc if you switch off the unit before commencing to play it. a Current photo/Total number of photos – Use A/D to view previous/next photo. -
Page 40: Listening To Music While Slide Show
Operating On-Screen display Listening to music while slide show You can display and adjust various information and settings about the content. You can display photo files while listening to audio files. Displaying content information 1. While viewing a photo in full screen, press INFO/ on-screen DISPLAY (m) to display the option menu. eroy 2. Use W/S to select [Music Select] option, and press ENTER (b) to display the [Music Select] 1. While playback, press INFO/DISPLAY (m) to menu. show various playback information. 3. Use W/S to select a device, and press ENTER (b). Device that you can select are differ depending on the location of the photo file you are displaying in full screen. Photo location Available Device Disc, USB Disc, USB DLNA server DLNA server 4. Use W/S to select a file or a folder you wish to... -
Page 41: Playing From Selected Time
Operating Note Hearing a different audio y If no button is pressed for a few seconds, eroy the on-screen display disappears. y A title number cannot be selected on some 1. During playback, press INFO/DISPLAY (m) to discs. display the On-Screen display. y Available items may differ depending on 2. Use W/S to select the [Audio] option. discs or titles. 3. Use A/D to select desired audio language, y If BD interactive title is playing back, some audio track or audio channel. setting information is displayed on the Note screen but prohibited to be changed. y Some discs allow you to change audio selections only via the disc menu. In this case, press TITLE/POP-UP or DISC MENU Playing from selected time button and choose the appropriate audio from the selections on the disc menu. eroy y Immediately after you have switched sound, 1. Press INFO/DISPLAY (m) during playback. The there may be a temporary discrepancy... -
Page 42: Watching From A Different Angle
Operating Watching from a different Changing the Picture Mode angle eroy You can change the [Picture mode] option while playback. If the disc contains scenes recorded at different 1. During playback, press INFO/DISPLAY (m) to camera angles, you can change to a different display the On-Screen display. camera angle during playback. 2. Use W/S to select the [Picture Mode] option. 1. During playback, press INFO/DISPLAY (m) to display the On-Screen display. 3. Use A/D to select desired option. 2. Use W/S to select the [Angle] option. 4. Press BACK(x) to exit the On-Screen display. 3. Use A/D to select desired angle. Setting the [User setting] option 4. Press BACK(x) to exit the On-Screen display. 1. During playback, press INFO/DISPLAY (m) to display the On-Screen display. -
Page 43: Changing Subtitle Code Page
Operating Audio CD Recording Changing subtitle code page You can record one desired track or all of the tracks If the subtitle is displayed in broken letter, you can in Audio CD to a USB storage device. change the subtitle code page to view the subtitle 1. Insert a USB storage device to the USB port on file properly. the front panel. 1. During playback, press INFO/DISPLAY (m) to 2. Press B (OPEN/CLOSE), and place an Audio CD display the playback menu. on the disc tray. 2. Use W/S to select the [Code Page] option. Press B (OPEN/CLOSE) to close the disc tray. 3. Use A/D to select desired code option. The playback starts automatically. 3. Press INFO/DISPLAY (m) to display the option menu. 4. Use W/S to select [CD Recording] option, and press ENTER (b). 5. Use W/S to select a track you wish to copy on the menu, and press ENTER (b). Repeat this step to select tracks as many as you can. Selects all the tracks on an 4. Press BACK(x) to exit the On-Screen display. -
Page 44: Displaying Mp3 Music Information
Actual recording time for USB storage device varies depending on the USB storage device’s ability. Note y Make sure that there is minimum of 50 MB free space is needed when recording into y Depending on the MP3 files, information the USB storage device. may not be displayed on the screen. y The length of the music should be longer y MP3 files in USB or external HDD are not than 20 seconds for the proper recording. worked for this function. y Do not turn off this player or extract the connected USB storage device during Audio CD recording. > Caution The recording or copying features on this player are provided for your personel and noncommercial use. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes. LG expressly disclaims any responsibility for illegal distribution or use of unauthorized content in commercial purpose. Be Responsible Respect Copyrights... -
Page 45: Radio Operations
Operating Radio Operations Deleting a saved station 1. Press PRESET - / + to Select a preset number you want to delete. Be sure that the antenna is connected. (Refer to the page 19) 2. Press CLEAR, the preset number will blink in the display window. Listening to the radio 3. Press CLEAR again, to delete the selectd preset number. 1. Press RADIO&INPUT (P) until TUNER (FM) appears in the display window. The last received Improving poor FM reception station is tuned in. 2. Press and hold TUNING (-/+) for about two Press B (blue) (MONO/STEREO) coloured button on seconds until the frequency indication starts to the remote control. This will change the tuner from change. Scanning stops when the unit tunes in stereo to mono and usually improve the reception. a station. Or Press TUNING (-/+) repeatedly. See information about a radio 3. Adjust the volume by rotating VOLUME on the front panel or by pressing VOL (+/- ) on the station... -
Page 46: Enjoying The Netcast™ Entertainment Access
Operating Enjoying the NetCast™ Entertainment Access You can use various content services via Internet with the NetCast Entertainment Access feature. 1. Check the network connection and settings (page 21). 2. Press HOME (n). 3. Select the [NetCast] using A/D, and press ENTER (b). 4. Select an option using W/S/A/D, and press ENTER (b). Note y Detailed information of each service, contact to the content provider or visit support link of the service. y The content of NetCast services and service related information, including user interface, is subject to changes. Please refer to the web site of each service for most up-to-date information. -
Page 47: Troubleshooting
Troubleshooting General Symptom Cause & Solution The Power does not turned on. Plug the power cord into the wall outlet securely. The unit does not start y Insert a playable disc. (Check the disc type, colour system, and playback. regional code.) y Place the disc with the playback side down. y Place the disc on the disc tray correctly inside the guide. y Clean the disc. y Cancel the Rating function or change the rating level. The angle cannot be changed. Multi-angles are not recorded on the DVD Video being played. Cannot play movie, photo or y The files are not recorded in a format that the unit can play. music files. y The unit does not support the codec of the movie file. The remote control does not y The remote control is not pointed at the remote sensor of the unit. work properly. y The remote control is too far from the unit. y There is an obstacle in the path of the remote control and the unit. y The batteries in the remote control are exhausted. The unit is plugged in, but the You can reset the unit as follows. -
Page 48: Network
Troubleshooting Network Symptom Cause & Solution BD-Live feature does not y The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. work. y Ensure that the unit is correctly connected to the local area network and can access the internet (see page 21). y Your broadband speed may not fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended. y The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. Streaming video services (such Your broadband service speed may not be fast enough to stream video as YouTube™, etc.) are often services. Contact your Internet Service Provider (ISP) and increase the stopped or “buffer” during broadband speed is recommended. playback. Shared folder or files from The player is not connected to the local area network that your media media server are not displayed server are connected. on the device list. Picture Symptom Cause & Solution There is no picture. y Select the appropriate video input mode on the TV so the picture from the unit appears on the TV screen. -
Page 49: Sound
Troubleshooting Sound Symptom Cause & Solution There is no sound or the y Connect the audio connection securely. sound is distorted. y The input source setting on the amplifier or the connection to the amplifier is incorrect. y The unit is in scan, slow motion, or pause mode. y The sound volume is low. y Check that the connected amplifier is compatible with audio format output from the unit. y The unit’s HDMI OUT jack is connected to a DVI device. The DVI jack does not accept audio signal. y Check the device connected to unit’s HDMI OUT jack is compatible with audio format output from the unit. Customer Support You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://lgservice.com or contact LG Electronics customer care center. Open source software notice To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are available to download with the source code. -
Page 50: Appendix
Appendix Controlling a TV with Setting up the remote to control your TV the Supplied Remote You can operate your TV with the supplied remote Control control. If your TV is listed in the table below, set the appropriate manufacturer code. You can control your TV using the buttons below. 1. While holding down 1 (TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below). Manufacturer Code Number 1(Default), 2 Zenith 1, 3, 4 By pressing You can GoldStar 1, 2 Turn the TV on or off. 1 (TV POWER) Samsung 6, 7... -
Page 51: Network Software Update
Appendix Network Software Software Update Update You can update the player using the latest software to enhance the products operation and/or add new features. You can update the software by connecting the unit directly to the software update Network update notification server. Note From time to time, performance improvements y Before updating the software in your player, and/or additional features or services may be remove any disc and USB Device from the made available to units that are connected to a player. broadband home network. If there is new software available and the unit is connected to a broadband y Before updating the software in your player, home network, the player will inform you about the turn the player off and then turn it back on. update as follows. y During the software update procedure, do not turn off the player or disconnect AC Option 1: power, or do not press any button. 1. The update menu will appear on the screen y If you cancel the update, turn off the power when you turn on the player. and turn it on for stable performance. -
Page 52: About Nero Mediahome 4 Essentials
9. When update is completed, the power will be y This manual explains operations with turned off automatically in a few seconds. the English version of Nero MediaHome 10. Turn the power back on. The system now 4 Essentials as examples. Follow the operates with the new version. explanation referring to the actual operations of your language version. Note The Software Update function may not work properly depending on your internet Installing Nero MediaHome 4 environment. In this case, you can obtain Essentials the latest software from the authorized LG Electronics Service Center then update your Before you install Nero MediaHome 4 Essentials, player. Refer to “Customer Support” on page 49. check the system requirement shown below. y Windows® XP (Service Pack 2 or higher), Windows Vista® (no Service Pack required), Windows® XP Media Center Edition 2005 (Service Pack 2 or higher), Windows Server® 2003 y Windows Vista® 64-bit edition (application runs in 32-bit mode) y Hard drive space: 200 MB hard drive space for a typical installation of Nero MediaHome stand- alone y 1.2 GHz Intel® Pentium® III or AMD Sempron™ 2200+ processors... -
Page 53: Sharing Files And Folders
Appendix Sharing files and folders y Graphics card with at least 32 MB video memory, minimum resolution of 800 x 600 pixels, and 16- On your computer, you must share the folder bit color settings contained movie, music and/or photo content to y Windows® Internet Explorer® 6.0 or higher play them on this player. y DirectX® 9.0c revision 30 (August 2006) or higher This parts explains the procedure for selecting the y Network environment: 100 Mb Ethernet, WLAN shared folders on your computer. Start up your computer, and insert the supplied CD- 1. Double-click the “Nero MediaHome 4 Essentials” ROM disc into your computer’s CD-ROM drive. An icon on the desktop. installation wizard will walk you through the quick 2. Click [Network] icon on the left and define your and uncomplicated installation process. To install network name in the [Network name] field. The Nero MediaHome 4 Essentials, proceed as follows: Network name you enter will be recognized by 1. Close all Microsoft Windows programs and exit your player. any anti-virus software that may be running. 3. Click [Shares] icon on the left. 2. Insert the supplied CD-ROM disc into your 4. Click [Local Folders] tab on the [Shares] screen. -
Page 54: Area Code List
Appendix Area Code List Choose an area code from this list. Area Code Area Code Area Code Area Code Afghanistan Fiji Monaco Singapore Argentina Finland Mongolia Slovak Republic Australia France Morocco Slovenia Austria Germany Nepal South Africa Belgium Great Britain Netherlands South Korea Bhutan Greece Antilles Spain Bolivia Greenland New Zealand Sri Lanka Brazil Hong Kong... -
Page 55: Language Code List
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu]. Language Code Language Code Language Code Language Code Afar 6565 French 7082 Lithuanian 7684 Sindhi 8368 Afrikaans 6570 Frisian 7089 Macedonian 7775 Singhalese 8373 Albanian 8381 Galician 7176 Malagasy 7771 Slovak 8375 Ameharic 6577 Georgian 7565 Malay... -
Page 56: Trademarks And Licenses
Appendix Trademarks and Licenses Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, are registered trademarks,& DTS-HD, DTS-HD BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. “DVD Logo” is a trademark of DVD Format/Logo Java and all Java-based trademarks and logos Licensing Corporation. are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks HDMI, the HDMI logo and High-Definition of the Digital Living Network Alliance. Multimedia Interface are trademarks or registered “x.v.Color” is a trademark of Sony Corporation. trademarks of HDMI licensing LLC. “AVCHD” and the “AVCHD” logo are trademarks of Panasonic Corporation and Sony Corporation. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. DivX®, DivX Certified® and associated logos are trademark of DivX, Inc., and are used under license. -
Page 57: Video Output Resolution
Appendix Video Output VIDEO OUT connection The resolution of the VIDEO OUT jack is always Resolution outputted at 480i resolution. HDMI OUT connection y If you select a resolution manually and then connect the HDMI jack to TV and your TV does not accept it, the resolution setting is set to [Auto]. y If you select a resolution that your TV does not accept, the warning message will appear. After resolution change, if you cannot see the screen, please wait 20 seconds and the resolution will automatically revert back to the previous resolution. y The 1080p video output frame rate may be automatically set to either 24 Hz or 60 Hz depending both on the capability and preference of the connected TV and based on the native video frame rate of the content on the BD-ROM disc. -
Page 58: Specifications
Appendix Specifications General Power requirements AC 200 - 240 V, 50/ 60 Hz Power consumption 85 W Dimensions (W x H x D) Approx. 360 x 59 x 307 mm without foot Net Weight (Approx.) 2.8 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL IN (OPTICAL) Optical Connector x 1 PORT. IN 0.5 Vrms (3.5 mm stereo jack) Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz Amplifier Power output (3 Ω), (RMS), THD 10 % (3 Ω/ 3 Ω) Total 850 W Front 141 W x 2 Center 141 W Surround 141 W x 2 Sub-Woofer 145 W (Passive) Wireless receiver Power requirements... - Page 59 Appendix System Laser Semiconductor laser Wavelength 405 nm / 650 nm Signal system Standard NTSC color TV system Frequency response 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio More than 80 dB Total harmonic distortion 0.05 % at 1 W Dynamic range More than 85 dB LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX Bus Power Supply (USB) DC 5 V 0 500 mA Speakers Front speaker (Left/ Right) Type 1 Way 1 speaker Max. Input power 282 W Net Dimensions Impedance Rated 3 Ω 102 x 193 x 81 mm (W x H x D) Input Power 141 W Net Weight 0.45 kg Rear speaker (Left/ Right) Type 1 Way 1 speaker Max. Input power 282 W Net Dimensions Impedance Rated 3 Ω...
-
Page 60: Maintenance
Appendix Maintenance Notes on Discs Handling Discs Handling the Unit Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the When shipping the unit disc. Please save the original shipping carton and Storing Discs packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was After playing, store the disc in its case. Do not originally packed at the factory. expose the disc to direct sunlight or sources of heat Keeping the exterior surfaces clean and never leave it in a parked car exposed to direct sunlight. y Do not use volatile liquids such as insecticide spray near the unit. Cleaning Discs y Wiping with strong pressure may damage the surface. Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, y Do not leave rubber or plastic products in clean the disc with a clean cloth. Wipe the disc from contact with the unit for a long period of time. -
Page 61: Important Information Relating To Network Services
Appendix Important Information Relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it originated. The availability of and access to Content and Services furnished by the Service Provider through the LGE Device are subject to change at any time, without prior notice, including, but not limited to the suspension, removal or cessation of all or any part of the Content or Services. Should you have any inquiry or problem related to the Content or Services, you may refer to the Service Provider’s website for the most up-to- date information. LGE is neither responsible nor liable for customer service related to the Content and Services. Any question or request for service relating to the Content or Services should be made directly to the respective Content and Service Providers. Please note that LGE is not responsible for any Content or Services provided by the Service Provider or any changes to, removal of, or cessation of such Content or Services and does not warrant or guaranty the availability of or access to such Content or Services.