LG SH86SH-S Simple Manual
3d / 2d blu-ray disc wireless home cinema system
Hide thumbs
Also See for SH86SH-S:
- Owner's manual (62 pages) ,
- Simple manual (22 pages) ,
- Owner's manual (60 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG SH86SH-S
Summary of Contents for LG SH86SH-S
- Page 1 SIMPLE MANUAL 3D / 2D Blu-ray Disc WIRELESS HOME CINEMA SYSTEM Please read this manual carefully before operating your set and retain it for future reference. HX806SHW (HX806SHW, SH86SH-F/ S/ C, SH95TA-W, W86) P/NO: MFL67204994 HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 1 2011-05-23 9:30:29...
-
Page 2: Safety Information
Getting Started Safety Information CAUTION CAUTION: This product employs a Laser System. RISK OF ELECTRIC SHOCK To ensure proper use of this product, please read DO NOT OPEN this owner’s manual carefully and retain it for future CAUTION: TO REDUCE THE RISK OF ELECTRIC reference. Shall the unit require maintenance, SHOCK DO NOT REMOVE COVER (OR BACK) NO contact an authorized service centre. USER-SERVICEABLE PARTS INSIDE REFER SERVICING Use of controls, adjustments or the performance of TO QUALIFIED SERVICE PERSONNEL. procedures other than those specified herein may result in hazardous radiation exposure. This lightning flash with arrowhead To prevent direct exposure to laser beam, do not try symbol within an equilateral triangle to open the enclosure. Visible laser radiation when is intended to alert the user to the open. DO NOT STARE INTO BEAM. presence of uninsulated dangerous CAUTION concerning the Power Cord voltage within the product’s enclosure that may be of sufficient magnitude to Most appliances recommend they be placed upon constitute a risk of electric shock to persons. a dedicated circuit;... - Page 3 The multi system colour TV changes the colour environment and human health. system automatically according to input signals. 4. For more detailed information about In case that the colour system is not changed disposal of your old appliance, please automatically, turn it off and then on to see contact your city office, waste disposal normal images on screen. service or the shop where you purchased the product. y Even if the disc recorded in NTSC colour system are well displayed on your TV, these may not be For Wireless product European Union Notice recorded correctly on your recorder. LG Electronics hereby declares that this/ these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC, 2004/108/EC, 2006/95/EC and 2009/125/EC. Please contact to the following address for obtaining a copy of the DoC (Declaration of Conformity). European representative : LG Electronics Service HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 3 2011-05-23 9:30:30...
-
Page 4: Supplied Accesorries
Getting Started Network Software Supplied Accesorries Update Network update notification Video cable (1) Speaker cables (1) From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows. Remote control (1) Battery (1) Option 1: 1. The update menu will appear on the screen when you turn on the player. 2. Use A/D to select a desired option and then press ENTER (b). FM antenna (1) Owner’s Manual & PC Software CD [OK] Starts the software update. [Cancel] Exits the update menu and displays it next booting. [Hide] Exits the update menu and it does not appear until next software is uploaded in the update server. -
Page 5: Table Of Contents
Table of Contents Table of Contents System Setting Settings – Adjust the Setup Settings – Resolution Setting Getting Started – Wired Network Setup Safety Information Operating – Supplied Accesorries Network Software Update General Playback – Network update notification – Using [HOME] menu Introduction –... -
Page 6: Introduction
Getting Started Introduction Playable Discs and symbols used in this manual Media/Term Logo Symbol Description y Discs such as movies that can be purchased or rented. y “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs. y BD-R/RE discs that are recorded in BDAV format. Blu-ray y BD-R/RE discs that contain Movie, Music or Photo files. y ISO 9660+JOLIET, UDF and UDF Bridge format y Discs such as movies that can be purchased or rented. y Movie mode and finalized only DVD-ROM y Supports the dual layer disc also DVD-R Finalized AVCHD format DVD-RW DVD+R DVD+RW y DVD±R/RW discs that contain Movie, Music or Photo files. -
Page 7: File Requirement
Getting Started File requirement Movie files File File Codec Format Audio Format Subtitle Location Extension “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”, DIVX5.xx, DIVX6.xx DTS, MP3, SubStation Alpha (.ssa/.txt), “.mkv”, “.mp4”, (standard playback WMA, AAC, MicroDVD (.sub/.txt), VobSub Disc, “.asf”, “.wmv”, only), XVID, MPEG1 SS, (.sub), SubViewer 1.0 (.sub), “.m4v” (DRM H.264/MPEG-4 AVC, SubViewer 2.0 (.sub/.txt), TMPlayer free) MPEG2 PS, MPEG2 TS, (.txt), DVD Subtitle System (.txt) VC-1 SM (WMV3) “.avi”, “.divx”, DIVX3.xx, DIVX4.xx, Dolby Digital, SubRip (.srt / .txt), SAMI (.smi), “.mpg”, “.mpeg”,... -
Page 8: Remote Control
Getting Started Remote control • • • • • • a • • • • • • • • • • • • c • • • • • RADIO&INPUT (P): Changes SPEAKER LEVEL: Sets the sound input mode. level of desired speaker. MARKER: Marks any point during SOUND EFFECT: Selects a sound playback. -
Page 9: Front Panel
Getting Started Front panel c PORT.IN a 1/' (POWER) Button USB Port b R (OPEN/CLOSE) d Volume control T (PLAY/PAUSE) I (STOP) Y/U (SKIP) FUNC. (Function) Changes the input source or function. Rear panel e AUX (R/L) IN/VIDEO OUT a Speakers connectors f HDMI OUT (Type A, HDMI™ Connector) b Cooling Fan Connect to TV with HDMI inputs. c Antenna Connector g LAN port d OPTICAL IN HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 9 2011-05-23... -
Page 10: Connecting
Connecting > Caution Positioning the system y Be careful to make sure children not to put their hands or any objects into the *speaker The following illustration shows an example of duct. positioning the system. Note that the illustrations *Speaker duct: A hole for plentiful bass in these instructions differ from the actual unit for sound on speaker cabinet (enclosure). explanation purposes. y Place the center speaker at a safe distance For the best possible surround sound, all the from the child’s reach. speakers other than the subwoofer should be Otherwise it may result in the speaker falling placed at the same distance from the listening down and causing personal injury and/or position ( property damage. y The speakers contain magnetic parts, so colour irregularity may occur on the CRT TV screen or PC monitor screen. Please use the speakers away from the TV screen or PC monitor screen. Front left speaker (L)/ Front right speaker (R): Place the front speakers to the sides of the monitor or screen and as flush with the screen surface as possible. -
Page 11: Speaker Connection
Connecting Speaker Connection Attaching the rear speakers to the wireless receiver Connect the rear speakers to the wireless receiver Attaching the speakers to the with the speaker cables. player Make sure the wire marked black goes in to the terminal marked “–” (minus) and the other wire Connect the wires hooked up to the speaker to the goes in to the terminal marked “+” (plus). unit. - To connect the cable to the unit, press each plastic finger pad to open the connection terminals on the unit. Insert the wire and release the finger pad. - Connect the black stripe of each wire to the terminals marked - (minus) and the other end to the terminals marked + (plus). About Ferrite Core (for EMI only) Be sure to attach the ferrite core to the speaker cable. This ferrite core can reduce noises. -
Page 12: Wireless Connection
Connecting Wireless connection Connect wireless speakers When the unit is manufactured, the ID is already When you turn on the player, the wireless set. If interference occurs or you use a new wireless connection will be completed automatically. unit, an ID should be set again. When the connection is completed, you can see the icon ( ) on the display window. When the [Wireless Speaker Connection Guide] appears, press the PAIRING button on the receiver. LED indicator of wireless receiver - If you see the blue LED indicator light on the wireless receiver, the pairing was successful. LED Color Operation Select the [Speaker test] to test the connection. The connection is not Blue (Blink) completed. Blue The connection is completed. The connection is in standby mode or failed. Off The AC power cord is unplugged. (No display) Note y Be sure to match the speaker, cable to the appropriate terminal on the unit: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. -
Page 13: System Setting
System Setting Settings Resolution Setting The player provides several output resolutions for HDMI OUT jack. You can change the resolution using [Setup] menu. Adjust the Setup Settings 1. Press HOME (n). You can change the settings of the player in the 2. Use A/D to select the [Setup] and press ENTER [Setup] menu. (b). The [Setup] menu appears. 1. Press HOME (n). 3. Use W/S to select [DISPLAY] option then press D to move to the second level. 4. Use W/S to select the [Resolution] option then press ENTER (b) to move to the third level. 2. Use A/D to select the [Setup] and press ENTER (b). The [Setup] menu appears. 5. Use W/S to select the desired resolution then press ENTER (b) to confirm your selection. Note y If your TV does not accept the resolution 3. Use W/S to select the first setup option, and you have set on the player, you can set press D to move to the second level. -
Page 14: Wired Network Setup
System Setting Wired Network Setup 5. The player will ask you to test the network connection. Select [OK] and press ENTER (b) to If there is a DHCP server on the local area network complete the network connection. (LAN) via wired connection, this player will 6. If you select [Test] and press ENTER (b) at automatically be allocated an IP address. After step 5 above, the network connection status is making the physical connection, a small number of displayed on the screen. home networks may require the player’s network You can also test it on the [Connection Status] setting to be adjusted. Adjust the [NETWORK] in the [Setup] menu. setting as follow. Preparation Before setting the wired network, you need to connect the broadband internet to your home network. 1. Select [Connection Setting] option in the [Setup] menu then press ENTER (b). 2. Select [Yes] and press ENTER (b) to continue. The new connection settings reset the current network settings. 3. Use W/S/A/D to select the IP mode between [Dynamic] and [Static]. Normally, select [Dynamic] to allocate an IP address automatically. Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using W/S/... -
Page 15: Operating
Operating General Playback Playing a Disc 1. Press B (OPEN/CLOSE), and place a disc on the Using [HOME] menu disc tray. The home menu appears when you press HOME 2. Press B (OPEN/CLOSE) to close the disc tray. (n). Use A/D to select a category and press For the most Audio CD, BD-ROM and ENTER (b). DVD-ROM discs, playback starts automatically. 3. Press HOME (n). 4. Select [Movie] or [Music] using A/D, and press ENTER (b). 5. Select [BD], [DVD], [VR] or [Audio] option using W/S, and press ENTER (b). Note y Playback functions described in this manual are not always available in every files and media. Some functions can be restricted depending on many factors. y Depending on the BD-ROM titles, a USB device connection may be needed for the a [Movie] - Plays video contents. proper playback. -
Page 16: Basic Operations For Video And Audio Content
Operating On-Screen display Basic operations for video and audio content You can display and adjust various information and To stop playback settings about the content. eroy Press Z (STOP) while playback. 1. While playback, press INFO/DISPLAY (m) to To pause playback show various playback information. Press M (PAUSE) while playback. Press d (PLAY) to resume playback. To play frame-by-frame (Video) Press M (PAUSE) while movie playback. Press M (PAUSE) repeatedly to play Frame-by-Frame playback. To scan forward or backward Press c or v to play fast forward or fast reverse during playback. You can change the various playback speeds by pressing c or v repeatedly. -
Page 17: Troubleshooting
Troubleshooting Troubleshooting Troubleshooting Symptom Cause & Solution The Power does not turned on. y Plug the power cord into the wall outlet securely. The unit does not start y Insert a playable disc. (Check the disc type, colour system, and playback. regional code.) y Place the disc with the playback side down. y Place the disc on the disc tray correctly inside the guide. y Clean the disc. y Cancel the Rating function or change the rating level. The angle cannot be changed. y Multi-angles are not recorded on the DVD Video being played. Cannot play movie, photo or y The files are not recorded in a format that the unit can play. music files. y The unit does not support the codec of the movie file. The remote control does not y The remote control is not pointed at the remote sensor of the unit. work properly. y The remote control is too far from the unit. y There is an obstacle in the path of the remote control and the unit. y The batteries in the remote control are exhausted. -
Page 18: Customer Support
The [BD-LIVE connection] option in the [Setup] menu is set to [Prohibited]. Set the option to [Permitted]. Streaming video services (such y Your broadband service speed may not be fast enough to stream as YouTube™, etc.) are often video services. Contact your Internet Service Provider (ISP) and stopped or “buffer” during increase the broadband speed is recommended. playback. Shared folder or files from The player is not connected to the local area network that your media media server are not displayed server are connected. on the device list. There is no sound or the sound y The unit is in scan, slow motion, or pause mode. is distorted. y The sound volume is low. y Check the speaker cable connection. Customer Support You can update the Player using the latest software to enhance the products operation and/or add new features. To obtain the latest software for this player (if updates have been made), please visit http://lgservice.com or contact LG Electronics customer care centre. Open source software notice To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are available to download with the source code. HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 18 2011-05-23 9:30:35... -
Page 19: Appendix
Appendix Trademarks and Licenses Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™, BONUSVIEW™ and the logos are trademarks of are registered trademarks,& DTS-HD, DTS-HD the Blu-ray Disc Association. Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service marks, or certification marks of the Digital Living Network Alliance. Java and all Java-based trademarks and logos “AVCHD” and the “AVCHD” logo are trademarks of are trademarks or registered trademarks of Sun Panasonic Corporation and Sony Corporation. Microsystems, Inc. in the United States and other countries. DivX®, DivX Certified® and associated logos HDMI, the HDMI logo and High-Definition are trademark of DivX, Inc., and are used under Multimedia Interface are trademarks or registered license. trademarks of HDMI licensing LLC. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 19 2011-05-23 9:30:36... -
Page 20: Specifications
Appendix Specifications General Power requirements AC 200 - 240 V, 50/ 60 Hz Power consumption 85 W Dimensions (W x H x D) Approx. 360 x 59 x 307 mm without foot Net Weight (Approx.) 2.8 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 5 % to 90 % Inputs/Outputs VIDEO OUT 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1 HDMI OUT (video/audio) 19 pin (Type A, HDMI™ Connector) ANALOG AUDIO IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL IN (OPTICAL) Optical Connector x 1 PORT. IN 0.5 Vrms (3.5 mm stereo jack) Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.00 MHz Amplifier Power output (3 Ω), (RMS), THD 10 % (3 Ω/ 3 Ω) Total 850 W Front 141 W x 2 Center 141 W Surround 141 W x 2 Sub-Woofer 145 W (Passive) Wireless receiver Power requirements... - Page 21 Appendix System Laser Semiconductor laser Wavelength 405 nm / 650 nm Signal system Standard NTSC color TV system Frequency response 20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling) Signal-to-noise ratio More than 80 dB Total harmonic distortion 0.05 % at 1 W Dynamic range More than 85 dB LAN port Ethernet jack x 1, 10BASE-T / 100BASE-TX Bus Power Supply (USB) DC 5 V 0 500 mA Speakers Front speaker (Left/ Right) Type 1 Way 1 speaker Max. Input power 282 W Net Dimensions Impedance Rated 3 Ω 102 x 193 x 81 mm (W x H x D) Input Power 141 W Net Weight 0.45 kg Rear speaker (Left/ Right) Type 1 Way 1 speaker Max. Input power 282 W Net Dimensions Impedance Rated 3 Ω...
- Page 22 An extended Owner's Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive. HB806SHW-D0_BAUTLL_SIM_ENG_4994.indd 22 2011-05-23 9:30:36...