Supported Antennas For The Ir1800 Series Router - Cisco Catalyst IR1800 Rugged Series Hardware Installation Manual
Hide thumbs
Also See for Catalyst IR1800 Rugged Series:
- Installation manual (96 pages) ,
- Connecting (4 pages) ,
- Installation manual (92 pages)
Table of Contents
Advertisement
Antenna Selection and Installation
• The density of the materials used in a building's construction determines the number of walls the signal
• Avoid mounting an antenna next to a column or vertical support. This might create a shadow zone and
• Keep the antenna away from reflective metal objects such as heating and air-conditioning ducts, large
This radio transmitter [IC:2461A-WPWIFI6] has been approved by Innovation, Science and Economic
Development Canada to operate with the antenna types listed in this guide, with the maximum permissible
gain indicated. Antenna types that are not included in this list and have a gain greater than the maximum gain
indicated for any type listed are strictly prohibited for use with the IR1800 Series router.
Le présent émetteur radio [IC:2461A-WPWIFI6] a été approuvé par Innovation, Sciences et Développement
économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible
maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué
pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur.
Supported Antennas for the IR1800 Series Router
The following tables list the antennas supported for IR800 Series router.
Note
Wherever 4G LTE is mentioned in antenna RF port designations, the antennas will also support 5G NR in
the same bands and ports, even though documentation may refer to the antenna as LTE. For details of which
bands each antenna supports, please consult the detailed information for each antenna.
must pass through while still maintaining adequate coverage. Consider the following before choosing
the location for installing the antenna:
• Paper and vinyl walls have very little effect on signal penetration.
• Solid and precast concrete walls limit signal penetration to one or two walls without degradation of
coverage.
• Concrete and wood block walls limit signal penetration to three or four walls.
• A signal can penetrate five or six walls constructed of drywall or wood.
• A thick metal wall or wire-mesh stucco wall causes signals to reflect back and causes poor
penetration.
reduce the coverage area.
ceiling trusses, building superstructures, and major power cabling runs. If necessary, use an extension
cable to relocate the antenna away from these obstructions.
Cisco Catalyst IR1800 Rugged Series Router Hardware Installation Guide
Supported Antennas for the IR1800 Series Router
39
- Quick Links:
- Cisco Ir1821 Router
- Cisco Ir1835 Router
Hide quick links:
Advertisement
Table of Contents
