Table of Contents
Advertisement
Wiring and Device Connections
V2-Master Server Rear Panel Connections
This section details the ports and connectors on the rear panel of the Vision
Output port
Vision
FIG. 2
The two flex drives at the rear of the V2-Master server are fitted with 146GB 15K SAS 2.5in Hot-Plug Drives configured as Raid1 for
the OS (Microsoft Windows Server 2008 Standard)
LAN (RJ-45) Port
LAN (RJ-45) Port
FIG. 3
FIG. 4 describes the blink activity for the LAN 10/100/1000 Base-T RJ-45 connector and cable.
LAN Connector / LEDs
FIG. 4
NOTE: Vision
The following table lists the pinouts, signals, and pairing associated with the LAN connector.
LAN RJ-45 Pinouts and Signals
Pin
Signals
1
TX +
2
TX -
3
RX +
4
no connection
5
no connection
6
RX -
7
no connection
8
no connection
2
Vision
Instruction Manual
LAN ports
2
Master Server Rear Panel
A
A - Activity LED (yellow)
lights when receiving or
transmitting LAN
data packets
2
uses typical Cat5/5e/6 cabling for RJ-45 connections.
Connections
1 --------- 1
1 --------- 2
2 --------- 2
3 --------- 3
3 --------- 6
4 --------- 4
5 --------- 5
4 --------- 5
6 --------- 6
7 --------- 7
7 --------- 8
8 --------- 8
L
L - Link LED (green) lights when
the LAN cables are connected
and terminated correctly.
ETHERNET
Pairing
Color
Orange-White
Orange
Green-White
Blue
Blue-White
Green
Brown-White
Brown
Wiring and Device Connections
2
Master server (FIG. 2).
Power connector
6
Advertisement
Table of Contents
Troubleshooting
