Related Manuals for LG 65SM5C-B
Summary of Contents for LG 65SM5C-B
- Page 1 INSTALLATION MANUAL LG Digital Signage (MONITOR SIGNAGE) Please read this manual carefully before operating the your set and retain it for future reference. webOS 3.0 www.lg.com...
-
Page 2: Table Of Contents
CONTENTS ACCESSING Crestron INSTALLATION MENU ....4 No Signal Image Factory Reset INSTALLATION MENU ....5 Semi-Transparent Brightness (0–100) - Signage Setup..............5 Hybrid Mode Power On Status Return Interval (0–10) Wake On LAN Proximity Sensitivity LAN Daisy Chain Status Message Power Off Management SIMPLINK Setup Rotation Local Dimming... - Page 3 - Fail Over ................21 - Server ...................25 Set Automatically Auto Server IP Manual Server Status - ISM Method ..............22 Port Number Mode Secured Connection Repeat - Lock Mode .................26 Wait Duration Action Cycle Reset to Initial Settings Bar Image IR Operation Bar Color Local Key Operation Transparency...
-
Page 4: Accessing Installation Menu
ACCESSING INSTALLATION MENU Press and hold the SETTINGS button for 5 seconds. When Input ID (The top right corner ) is displayed, enter your password. (The default value is 0, 0, 0, 0 • When the Installation Menu is displayed, select the desired option. - Signage Setup - USB Cloning - Password Change... -
Page 5: Installation Menu
INSTALLATION MENU NOTE • Some features described in the Installation manual may not be supported in certain models. Signage Setup Use this menu to configure the digital signage after installation. Power On Status • You can select the operating status of the monitor when the main power is switched on. •... -
Page 6: Power Off Management
Power Off Management • No Signal Power Off (15 Min) - You can choose whether to use the 15 min force off feature. - You can set this option to On or Off. - If you set this option to On, the product turns off when it has remained in no signal status for 15 minutes. - If you set this option to Off, the 15 min force off feature is disabled. - Page 7 • PM Mode - Power Off: Normal DC off status. - Sustain Aspect Ratio: Normal DC off status except that Switching IC stays on. On certain models, this applies only to a specific input mode (DisplayPort) and has the same effect as Screen Off Always in other input modes. - Screen Off: Automatically changes to Screen Off status when entering the DPM mode, Auto Off (15 mins, 4 hours), or Abnormal Shut Down.
-
Page 8: Rotation
Rotation • OSD Portrait Mode - This feature allows you to rotate the OSD clockwise. - You can set this feature to Off/90/180/270. (Some models only support certain settings.) - If you set this feature to Off, the feature is disabled. - If you set this feature to 90, the OSD rotates 90 degrees clockwise. -
Page 9: Beacon
Enables BLE Beacon, one of Bluetooth 4.0's features. • Beacon Mode (on/off toggle): Enables the Beacon feature. • Supports LG Beacon/iBeacon/Eddystone Type Beacon features. • LG Beacon/iBeacon - Beacon UUID (hex): Sets the UUID. 1. Field1: 4byte hex value (8 digits) 2. -
Page 10: Check Screen
Check Screen • The Check Screen feature judges whether there are abnormalities at the edges of the screen. R, G, and B OSDs are formed on the screen at one second intervals and an Pixel Sensor tests the areas. • If set to On, the Check Screen feature is enabled. -
Page 11: Power Indicator
Power Indicator • Changes Power Indicator settings. • If set to On, the Power Indicator is turned on. • If set to Off, the Power Indicator is turned off. • While the product is turned on, the Power Indicator is lit for about 15 seconds regardless of whether it is set to On or Off. -
Page 12: Sync Mode
Sync Mode • Syncs the products to the time and content of one product. • Off: Sync is disabled. • RS-232C: Syncs multiple monitors connected via RS-232C. - Master/Slave: These monitors can be set to Master or Slave. Only one monitor should be set to Master mode for this feature to work properly. -
Page 13: Intelligent Auto
Intelligent Auto • Adjusts the size, position, and phase of the monitor's screen automatically at the recognized resolution. This feature is available only in RGB input mode. Studio Mode • Outputs the images with a lower color temperature. • You can set this feature to On or Off. •... -
Page 14: Crestron
Crestron • This function enables synchronization with applications provided by Crestron. • Server: This menu sets the server's IP address for the network connection with the server (equipment provided by Crestron). • Port: This menu sets the port for the network connection with the server. The default port number is 41794. •... -
Page 15: Status Message
Status Message • Sets up a feature that sends the status of Signage to users' email addresses. • The administrator can set Status Message to On or Off. • Messaging Period: Sets a time interval to send messages. You can select either When Failure Status or Weekly. •... -
Page 16: Simplink Setup
SIMPLINK Setup • When the SIMPLINK Setup is set to On, you can use the SIMPLINK provided by LG Signage. • Device ID: S ets the ID of the device connected via CEC wiring. You can choose a value between 'All' and 'E'. -
Page 17: Easy Brightness Control
Easy Brightness Control • Adjusts the backlight according to the schedule you set. • You can set this option to On/Off. • Easy Brightness Control is disabled if the current time is not set. • You can add up to 6 schedules, and they are sorted in ascending order by time. •... -
Page 18: Guide To Using Content Rotation
Guide to Using Content Rotation [Portrait installation setting] You can turn the image into a portrait image using Content Rotation. When installing the display rotated 90 degrees: Set Content Rotation to 270. When installing the display rotated 270 degrees: Set Content Rotation to 90. Example) When installing the display rotated 90 degrees Original Content Rotation... - Page 19 [Video wall installation setting] You can implement a landscape and portrait video wall using Content Rotation. Example) Tile mode 2 x 2 * Landscape video wall * Portrait video wall - Set Content Rotation to 90 Original Tile Mode <Landscape> Rotating displays Content Rotation (90 degrees)
-
Page 20: Usb Cloning
USB Cloning You can copy the product settings to other sets. Send to USB • You can save the current settings in file format to a USB device. • Select the file name and press the OK button to complete •... -
Page 21: Fail Over
Fail Over The input source with the highest priority will be selected. • The Auto-Fail Over feature is disabled. Auto • The input source changes according to the specified order. When several input sources are found, the input source with the highest priority will be selected. •... -
Page 22: Ism Method
ISM Method If a still image is displayed on the screen for an extended period of time, image sticking can occur. The ISM method is a feature that prevents image sticking. Mode • Selects the desired ISM Method mode. • Normal: Disables the ISM method. -
Page 23: Action Cycle
Action Cycle • You can select from among 1–10 mins/20 mins/30 mins/60 mins/90 mins/120 mins/180 mins/240 mins. • This option is available only when you have selected Inversion or Orbiter. • Orbiter: Moves the position of the screen at specified intervals. •... -
Page 24: Bar Image Download
Bar Image Download • To download an image, the image file must be located under the folder titled "ISM" on your USB drive. • Make sure to delete the old images stored in the internal memory before downloading a new image file. •... -
Page 25: Server
Server Set Automatically • The monitor settings will be set automatically so that the SuperSign server can search it. Server IP • This is a menu where you can set an IP address for the SuperSign server. Server Status • Server Status displays the status of the connection between your monitor and the SuperSign server. -
Page 26: Lock Mode
Lock Mode • You can prevent the use of USB devices. • You can prevent OSD from displaying. Reset to Initial Settings • You can restore the initial settings with this feature. IR Operation • If you set IR Operation to Normal, you can use the remote control. •...