Page 1
Translated from Dutch to English - www.onlinedoctranslator.com Clothes dryer WQ33G2D1NL User manual and install ation instructions Register your product on My Siemens and discover exclusive services and off to/welcome siemens-home.bsh-group.c The future moving in. Siemens Home Appliances...
Refer to the Digital User's Guide for more information. Index 1 Safety..........4 9 Programs ........ 26 1.1 General instructions ....4 9.1 Automatic programs ..26 1.2 Destination of the device 9.2 Time programs....... 27 rate ........4 10 Accessories........ 29 1.3 Restriction of users ..
Page 3
16 Troubleshooting ....40 17 Transporting, Storing and drain........45 17.1 Preparing the device for transport ......45 17.2 Disposal of your old appliance ........ 45 18 Customer Service......46 18.1 Product number (E no.) and production number (FD) ... 46 19 Consumption values ....
NLSafety 1 Safety Observe the following safety instructions. 1.1 General instructions †Please read this manual carefully. †Keep the operating instructions and product information for future reference. for use or for subsequent owners. †Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: †to use dryer-safe and water-washed textiles...
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Connect and operate the device only in accordance with the information on the type plate. ▶ Only connect the device to a mains supply with alternating current via a properly installed earthing socket.
Page 6
NLSafety WARNING ‒ Risk of fire! Using an extended power cord and unauthorized adapters is dangerous. ▶ Do not use extension cords or multiple sockets. ▶ If the power cord is too short, contact customer service. ▶ Only use adapters approved by the manufacturer. WARNING ‒...
SafetyNL ▶ Level the appliance using the appliance feet and a spirit level. There is a tripping hazard with incorrectly laid hoses and mains connection cables. ▶ Lay the hoses and connection cables in such a way that they cannot be tripped over.
Page 8
NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the appliance behind a door that blocks or prevents the opening of the appliance door. ▶ In the case of discarded appliances, remove the mains plug from the socket, then cut the mains cable and damage the lock of the appliance door so that the appliance door no longer closes.
Page 9
SafetyNL WARNING ‒ Risk of fire! The refrigerant R290 in this appliance is environmentally friendly but flammable and can ignite on contact with open flames or ignition sources. ▶ Open flames and other ignition sources away from the hold device. WARNING ‒...
NLSafety The appliance may tip over when sitting or leaning on the open door. ▶ Do not sit or lean on the appliance door. ▶ Do not place any objects on the appliance door. Reaching into the rotating drum can cause injury to hands. ▶...
Avoid material damageNL Foam or foam rubber may warp or 2 Material damage melt when dried. avoid Do not dry foam or foam rubber ▶ laundry. Follow this instruction to avoid Unsuitable cleaning agents can material damage and damage to the damage the surfaces of the device.
NLSet up and connect Before drying, spin the laundry in 4 Set up and connect the washing machine. aWetter laundry extends the 4.1 Unpacking device program duration and increases energy consumption. PAY ATTENTION! Observe the maximum load for the Objects that remain in the drum and programmes.
Set up and connectNL Description delivery amount installation site Requirements catch The device on On the floor a clean, ef- Clothes dryer fen and fixed on- place surface. The device → Page 16 † Accompanying The device al- in a laundry documents borrow with the drying column...
NLSet up and connect Pull the condensate hose from 4.4 Water drain hose the connection. During drying, condensation is created that your appliance uses for automatic cleaning. Use the water drain hose to direct excess condensation water into the wastewater. Comments †Use this appliance with the supplied water drain hose.
Page 15
Set up and connectNL Push the water drain hose onto Connection types for water drainage the connection as far as it will go. PAY ATTENTION! With a clogged or closed drain, accumulated waste water can flow back into the unit. Before using the device, ensure ▶...
NLSet up and connect Drain in a the water feed hose com- ditch. crack through the slide and with the confirmation material securing The bend on the gutter. 4.5 Adjusting the device To reduce noises and vibrations, level the device. To adjust the appliance, turn the ▶...
Getting to know your deviceNL 5 Getting to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details in the picture may differ, e.g. the color and the shape. Door Air intake Condensate tank...
NLGetting to know your device 5.2 Control panel You can set all functions of your device and obtain information about the operating status via the control panel. Programs → Page 26 Program selector → Page 30 Display → Page 19 Buttons →...
DisplayNL 6 Display The display shows the current setting values, options or information texts. Example display indication name Description Indication 0:40 Approximate expected program duration Program duration / remaining time of or time remaining in the program. the program 1:25 Time program Time program is set.
Page 20
NLDisplay name Description Indication The drying target is activated. Drying purpose cabinet- → †Buttons", Page 23 The drying target is activated. Drying purpose cabinet- → †Buttons", Page 22 dry Plus Drying target The custom drying target has been activated. → †Buttons", Page 22 suits →...
Page 21
DisplayNL name Description Indication Pause Program status Program end Program status Example...
NLButtons 7 Buttons Here you will find an overview of the buttons and their setting options. Knob Description Choise Start Pause †start Start program, an- zero or pause. †Cancel †pause †activate Activate or deactivate the child lock. †deactivate The control panels secure against accidental operation.
Page 23
ButtonsNL Knob Description Choise †Cupboard Dry †With the selection Cabinet- Cupboard Dry †1 dry, the drying target is activated. †2 †3 Laying the drying target determine how damp or dry the laundry is at the end of the programme → †drying target", Page 25 †With the selection +1, +2...
Page 24
NLButtons Knob Description Choise Carefully †activate Activate soft drying or deactivate. †deactivate The temperature becomes lowered for sensitive textiles, e.g. for polyacrylic or elastane. The program duration is extended. †Program end †The program end Ready in capture. †Program duration The program duration is already included in the set number of hours.
Drying targetNL 8 Drying target A drying target is specified for each automatic programme. The drying target determines how dry or damp your laundry is after the program has ended. laundry Drying result Drying target The laundry is dry. Multi-layer thick laundry Cupboard dry + that dries hard.
NLPrograms 9 Programs You can dry your textiles with either an automatic program or a timed programme. 9.1 Automatic programs Tips Automatic programs in which moisture sensors measure the †Choose the drying target according to residual moisture of the laundry adjust the textile or the desired during drying.
ProgramsNL Program Description max. bela- thing (kg) outdoor Dry waterproof and outdoor clothing with a membrane and water-repellent textiles. Pillow Dry pillows with down filling or synthetic fibres. pillow Remark:To distribute the filling and remove moisture build-up, shake the pillows after the end of the program. Shirts Blouses Dry shirts and blouses made of cotton, linen, synthetic materials or blended...
Page 28
NLPrograms Time program Description max. bela- thing (kg) Dry all textiles except wool and silk. Suitable for pre-dried or slightly damp laundry and for post-drying multi-layered, thicker laundry.
accessoriesNL 10 Accessories Only use original accessories. These are adapted to the device. Remark:Some accessories are available in other colours. Contact the → †Customer Service", page 46 † Usage Order number Device space saving WZ27410 Connection set run on a suitable washing machine of the same the manufacturer and with the same width and...
QR code found in the digital operating in the table of contents or at instructions by scanning the QR code www.siemens-home.bsh-group.com . in the table of contents or at www.siemens-home.bsh-group.com . 11.1 Preparing the laundry 12.1 Switch on device...
ServiceNL Remove the laundry. 12.4 Starting the program 12.8 Switching off the device Remark:If you want to change the time Set the program selector to . ▶ until the program end, first set the ready in time. 12.9 Fluff filter onStart Pauseto press.
Page 32
NLService Remove the two-piece fluff filter. Open both fluff filters. Remove the fluff. Remove the fluff from the recess. Thoroughly clean both fluff filters with running warm water and dry Make sure that no fluff falls into them. the air duct. Detach the two-piece fluff filter.
ServiceNL Close the two fluff filters and plug Cleaning each time after drying is them together. not required. †If you do not use the device as writing, the device function may be hindered. Required:The display shows during use: . Cleaning the fluff filter →...
NLService Thoroughly clean the filter mat with 12.11 Condensate tank running warm water and press it During drying, condensation is out by hand. created that your appliance uses for automatic cleaning. The condensed water is collected in the condensed water container of the device at the factory.
14 Basic Settings You can configure the basic settings of your device according to your needs. Remark:More information can be found in the digital operating instructions by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com .
Remark:More information can be found in the digital operating instructions by scanning the QR code in the table of contents or at www.siemens-home.bsh-group.com . If you place a cloth under the service 15.1 Cleaning and maintenance flap, you can collect the residual tips water from the bottom unit.
Page 37
Cleaning and maintenanceNL Pull out the insert horizontally. CAREFULLY Chance of cutting! Sharp edges on the heat exchanger can lead to cuts if touched. Do not touch the fins of the heat ▶ exchanger. Opening the bottom unit → Page 36 † Clean the heat exchanger cover with a soft brush.
Page 38
NLCleaning and maintenance Carefully clean the air inlet grille with Close bottom unit the brush attachment of a vacuum Required:The bottom unit is open. cleaner. → †Open base unit", page 36 Insert the heat exchanger cover on the handle. Make sure that the grille is not deformed or damaged in the process.
Cleaning and maintenanceNL 15.3 Humidity sensor The humidity sensor of this appliance determines how damp your laundry is during drying. Depending on the residual moisture of the laundry, the appliance changes the duration of the automatic program. Clean Humidity Sensor Over time, residues of limescale, detergents and care products can form on the humidity sensor.
NLTroubleshooting 16 Troubleshooting You can remedy minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only qualified personnel may carry out repairs on the device. ▶...
Page 41
TroubleshootingNL Cause and Troubleshooting Malfunction device pauses, Cooling process active. but the drum No error - no action required. ▶ running. wrinkling. The load quantity is too high. Pay attention to the maximum load of the ▶ → †Programs", Page 26 † The laundry is left in the drum for too long after drying.
Page 42
NLTroubleshooting Cause and Troubleshooting Malfunction The device uses condensed water for automatic self- Condensation water in the cleaning. condensed water reservoir voir, although the water No error - no action required. ▶ drain hose is attached Water drain hose is not connected correctly. locks.
Page 43
TroubleshootingNL Cause and Troubleshooting Malfunction Heat exchanger is contaminated. Drying time is too long. → †Open base unit", page 36 † Clean heat exchanger. → †Cleaning the bottom unit", page 36 → †Close base unit", page 38 † The appliance is not leveled properly. Water is leaking.
Page 44
NLTroubleshooting Cause and Troubleshooting Malfunction Laundry is too damp. Loading quantity too little. Set a time program for post-drying. ▶ → †Programs", Page 26 Humidity sensor contaminated. → †Cleaning the humidity sensor", page 39 † ▶ Drying process aborted and condensed water container filled.
Transport, storage and disposalNL Secure the water drain hose on the 17 Transport, on- device against unintentional hit and drain loosening. Make sure that the water Here you will find an explanation of drain hose is not kinked. how to prepare the device for Emptying the condensed water container →...
NLcustomer service Make sure that the pipes of the ▶ Detailed information about the warranty cooling circuit are not damaged. period and warranty conditions in your country can be obtained from our after- Unplug the power cord from the sales service, your dealer or on our outlet.
Consumption valuesNL 19 Consumption values The program Cotton eco Depending on the type of textile, the (indicated by "arrow") is suitable for composition of the laundry to be dried, drying cotton laundry with normal residual moisture in the textile, the humidity and from the point of view of degree of drying selected, the amount of the combined energy consumption for...