Table of Contents
Related Manuals for Siemens WQ33G2CIDN
Summary of Contents for Siemens WQ33G2CIDN
- Page 1 Tumble dryer WQ33G2CIDN User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 9 Programmes ....... 26 1.1 General information.... 4 9.1 Automatic programmes.... 26 1.2 Intended use....... 4 9.2 Timed programmes .... 27 1.3 Restriction on user group... 4 10 Accessories...... 28 1.4 Safe installation ...... 5 1.5 Safe use ........ 7 11 Laundry........ - Page 3 16.3 Water tank filter ...... 39 16.4 Moisture sensor...... 39 17 Troubleshooting....... 41 18 Transportation, storage and disposal ........ 46 18.1 Preparing the appliance for transportation ...... 46 18.2 Disposing of old appliance .. 46 19 Customer Service..... 47 19.1 Product number (E-Nr.) and production number (FD).. 47 20 Consumption values....
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation Take note of the safety instructions when installing the appliance. WARNING ‒ Risk of electric shock! Improper installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. ▶ Do not drink or reuse the condensation water from the appli- ance. Detergents and care products may result in poisoning if con- sumed.
-
Page 9: Safe Cleaning And Maintenance
Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Foam and foam rubber may deform 2 Preventing material or melt during the drying process. Do not dry laundry that contains damage ▶ foam or foam rubber. Unsuitable cleaning products may Follow these instructions to avoid ma- damage the surfaces of the appli- terial damage and damage to the ap- ance. -
Page 12: Energy Saving Mode
en Installation and connection Spin the laundry in the washing ma- 4 Installation and con- chine before drying. nection a If the laundry is excessively damp, this extends the programme dura- tion and increases energy con- 4.1 Unpacking the appliance sumption. ATTENTION! Observe the programme's maximum Objects remaining in the drum that load capacity. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en Replace the accessories in ques- If the appliance is operated immedi- ▶ tion before operating the appli- ately after transportation, the refriger- ance. ant contained in the appliance may → "Accessories", Page 28 result in damage to the appliance. Immediately after transporting the ▶... -
Page 14: Water Drain Hose
en Installation and connection hose to drain away excess condens- Installation loca- Requirements ation directly into the waste water tion system. In a washer-dryer Only use the ori- Notes stack ginal connection ¡ Operate this appliance using the set from the water drain hose provided. - Page 15 Installation and connection en Pull out the condensation hose Push the water drain hose as far from the connecting piece. as it will go into the connecting piece. The condensation hose is connec- ted to the connecting piece at the Insert the water drain hose into the factory.
-
Page 16: Aligning The Appliance
en Installation and connection Water outlet connection types Secure the elbow to the gully. ATTENTION! In the event of a blocked or covered outlet, accumulated wastewater can flow back into the appliance. Before operating the appliance, en- ▶ 4.5 Aligning the appliance sure that the wastewater drains away quickly and eliminate any In order to reduce vibrations and... -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Air inlet Door Maintenance flap on the base Condensation container... -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 26 Programme selector → Page 29 Display → Page 19 Buttons → Page 22... -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Approximate expected programme dura- tion/programme tion or programme time remaining. time remaining 1:25 Timed programme The timed programme is set. → "Timed programmes", Page 27 8,0 kg Recommended... -
Page 20: Buttons
en Display Display Designation Description Dryness level: Iron The dryness level is activated. → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 23 Dryness level: The dryness level is activated. Cupboard Dry → "Buttons", Page 22 Plus Dryness level ad- The adjusted dryness level is activated. - Page 21 Display en Display Designation Description Dryness level: Programme status Cupboard Dry Anti-crease Programme status Crease-removal Programme status function Pause Programme status End of pro- Programme status gramme Example...
- Page 22 en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description Start/Reload ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause 3s ¡ Activate Activate or deactivate the childproof lock. ¡...
- Page 23 Buttons en Button Selection Description Cupboard Dry Cupboard Dry ¡ Selecting Cupboard ¡ Dry activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
- Page 24 en Buttons Button Selection Description Ready In ¡ Programme end ¡ Set the programme end. ¡ Programme length The programme dura- tion is already in- cluded in the set num- ber of hours. Once the programme has started, the pro- gramme duration is displayed.
-
Page 25: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Cupboard Multi-layered, thick laundry The laundry is dry. Extra Dry that does not dry readily. -
Page 26: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 27: Timed Programmes
Programmes en Programme Description Max. load (kg) Shirts Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. Once the laundry is dry, iron it or hang it up. - Page 28 en Accessories 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 47. Order number Connection kit To save space, stack the WZ27410 appliance on a suitable washing machine of the same width and depth and that is from the...
-
Page 29: Preparing The Laundry
QR code in the table of scanning the QR code in the table of contents or on www.siemens- contents or on www.siemens- home.bsh-group.com . home.bsh-group.com . -
Page 30: Starting The Programme
en operation Remove the laundry. 12.4 Starting the programme Note: If you want to change the time 12.8 Switching off the appli- until the programme ends, set the ance "Ready in" time first. Turn the programme selector to Press Start/Reload . ▶ ▶ a The display shows either the pro- 12.9 Fluff filter gramme duration or the "Ready in"... - Page 31 operation en Remove the two-part fluff filter. Open the two fluff filters. Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter.
-
Page 32: Filter System On The Base Unit
en operation Close the two fluff filters and put ¡ If you do not clean the appliance them together. as described, the appliance's func- tionality may be impaired. Requirement: The display shows the following during operation: Clean the fluff filter → Page 30. Open the base unit → Page 36. Carefully remove the filter mat from the retainers. -
Page 33: Condensation Container
operation en Clean the filter mat thoroughly un- 12.11 Condensation con- der warm, running water and tainer squeeze it out by hand. Condensation forms during drying, which your appliance uses for auto- matic cleaning. By default, the con- densation is collected in the appli- ance's condensation container. -
Page 34: Childproof Lock
en Childproof lock Empty the condensation container. 13 Childproof lock Secure your appliance against being operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold the two 3s but- ▶ tons for approx. 3 seconds. a The display shows a The controls are locked. Make sure that you insert the con- densation container before operat- a The childproof lock remains active... -
Page 35: Crease-Removal Function
Crease-removal function en with a crease-removal function for The results of the crease-removal any laundry that has not been worn function may vary depending on for long. the type of fabric, the amount of laundry and the selected pro- 14.1 Starting a programme gramme. -
Page 36: Basic Settings
Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on www.siemens- home.bsh-group.com . 16.1 Tips on cleaning and care Check the water tank filter regu- larly and clean the filter if it is dirty. - Page 37 Cleaning and servicing en Open the maintenance flap. Cleaning the base unit You can remove any visible dirt in the base unit. CAUTION Risk of cutting! Touching sharp edges on the heat exchanger may lead to cuts. Do not touch the fins on the heat ▶...
- Page 38 en Cleaning and servicing Pull the insert out horizontally. Carefully clean the air inlet grille with a vacuum cleaner and brush attachment. Clean the insert under running wa- ter and dry it off. In doing so, ensure that you do not deform or damage the grille.
-
Page 39: Water Tank Filter
Cleaning and servicing en Closing the base unit 16.3 Water tank filter Requirement: The base unit is open. The filter in the water tank protects → "Opening the base unit", Page 36 the appliance from dirt and contamin- ants. Insert the heat exchanger cover by the handle. - Page 40 en Cleaning and servicing ance changes the duration of the automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor. Clean the moisture sensor regularly. ATTENTION! Hard or rough objects may damage the moisture sensor.
-
Page 41: Troubleshooting
Troubleshooting en 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 42 en Troubleshooting Fault Cause and troubleshooting The appliance is not Check whether the lighting in your kitchen or other ▶ working. appliances are working. Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶...
- Page 43 Troubleshooting en Fault Cause and troubleshooting Condensation in the The appliance uses condensation for the automatic condensation tank self-cleaning. even though the water Not a fault – no action required. ▶ drain hose is connec- Water drain hose is not connected correctly. ted.
- Page 44 en Troubleshooting Fault Cause and troubleshooting The drying time is too → "Opening the base unit", Page 36. long. Clean the heat exchanger. → "Cleaning the base unit", Page 37 → "Closing the base unit", Page 39. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
- Page 45 Troubleshooting en Fault Cause and troubleshooting The laundry is too Remove the laundry from the drum as soon as the damp. drying programme has finished. Spread the items of laundry for cooling. Unsuitable dryness level set. → "Changing the dryness level", Page 25. ▶...
-
Page 46: Transportation, Storage And Disposal
en Transportation, storage and disposal Secure the water drain hose on the 18 Transportation, stor- appliance against unintentional loosening. age and disposal Ensure that you do not bend the You can find out here how to prepare water drain hose. your appliance for transportation and Empty the condensation container storage. -
Page 47: Customer Service
Customer Service en Unplug the appliance from the Detailed information on the warranty mains. period and terms of warranty in your country is available from our after- Cut through the power cord. sales service, your retailer or on our Dispose of the appliance in an en- website. - Page 48 en Consumption values 20 Consumption values Cotton Eco programme The actual values may deviate from (denoted by the arrow symbol) is the indicated values depending on suitable for drying cotton laundry with the type of fabric, composition of a normal dampness level, and is the laundry to be dried, residual moisture most efficient programme for drying in the fabric, set degree of dryness,...
-
Page 49: Technical Data
Technical data en Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) Cotton + Iron Dry 12,0 1400 1:14 0,52 Cotton + Iron Dry 12,0 1000 2:12... - Page 50 en Technical data ternatively, you can also find the model identifier in the first line of the EU energy label.
- Page 52 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001713939* 9001713939 (020211)