Overview Technical data Instrument Set-up Operations How to use the adapters and wall mount Message Codes Accuracy Check Care Safety instructions Optional accessories Makita SK106D/SK106GD...
Overview Ov e r v i e w The Makita SK106D/SK106GD is a self-levelling There are 2 different types available: 1 Window of vertical line and plumb up multifunctional laser. It combines the advantage of point a cross-line laser and a point laser in one tool. It is...
0.48 kg Weight with Li-Ion battery 0.69 kg – 0.85 kg Power supply Makita battery cartridge / USB adapter Rated voltage D.C. 10.8 V - 12 Vmax, D.C. in 5 V Dimensions (L x W x H) 112 x 61 x 102 mm (4.41 x 2.40 x 4.01 in) Operating temperature (instrument) -10…+50 °C (+14…+122 °F)
Page 4
Procedure 01/2014, are shown in the table. Some of the battery cartridges listed above may not be available depending on your region of residence. WARNING Only use the battery cartridges listed above. Use of any other battery cartridges may cause injury and/or fire. Makita SK106D/SK106GD...
Important paragraphs which must be adhered to in practice as they enable the product to be used in a technically correct and efficient manner. Makita SK106D/SK106GD...
Page 6
CAUTION ing and slip it into place. Insert it all the way until it We recommend the Makita LDX1 laser locks in place with a little click. If you can see the Always switch off the tool before installing or receiver.
Page 7
Instrument Set-up Using the USB adapter (optional) Makita CXT batteries Depending on the conditions of use and the ambient temperature, the indication may dif- fer slightly from the actual capacity. Indicating the remaining battery capacity Only for battery cartridges with the indicator Press the check button (2) on the battery cartridge to indicate the remaining battery capacity.
Operations Op e r a t i o n s Switching ON/Set key Brightness reduction If the instrument is locked press laser key 3 times to switch off: Makita SK106D/SK106GD...
Page 9
Operations Functions with unlocked levelling Horizontal / Vertical lines and dots Horizontal line and dots Vertical line and dots Makita SK106D/SK106GD...
Page 10
Operations Functions with locked levelling Horizontal line and dots Vertical line and dots Horizontal line tilted Makita SK106D/SK106GD...
Put the instrument on PRO L-adapter and fix it by The wall mount is a single item and will not be thread. delivered with the PRO L-adapter as shown above. PRO L-Adapter can not be used when bat- tery cartridge BL1040B or BL1041B is inser- ted. Makita SK106D/SK106GD...
Page 12
How to use the adapters and wall mount Different fixing applications Makita SK106D/SK106GD...
Levelling lock is activated and Change power supply instrument is at low power Blinks every 5 seconds Lights green Normal, levelling lock is activated Blinks every 5 seconds Blinks green Levelling lock is activated and laser set at reduced brightness Makita SK106D/SK106GD...
|(A1 - A2) - (B1 - B2)| <=2 mm (B1). If the difference does not exceed 2 mm, then the instrument is within tolerance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK106D/SK106GD...
Page 15
If the difference does not exceed 2 mm, then the instrument is within tolerance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK106D/SK106GD...
Page 16
1. Mark the laser points A1 from point B1, then the instrument is within tol- and B1 with a pin. erance. Should your instrument be outside of the spe- cified tolerance, please contact a local dealer or an authorised Makita distributor. Makita SK106D/SK106GD...
Page 17
Should your instrument be outside of the spe- Should your instrument be outside of the spe- cified tolerance, please contact a local dealer cified tolerance, please contact a local dealer or an authorised Makita distributor. or an authorised Makita distributor. Makita SK106D/SK106GD...
To clean the magnetic surface you could use compressed air or modelling clay. If the equipment get wet always dry it (max. 70°C/158°F) before repacking it into the case. Makita SK106D/SK106GD...
3. Always prevent access to the product by WARNING unauthorised personnel. Makita Line Laser and L-adapter / PRO L-adapter should not be used in the vicinity of pacemaker because of integrated magnets which can affect the function of the pacemaker.
Page 20
12. Use the batteries only with the products (1) Do not touch the terminals with any the battery may cause irritation or burns. specified by Makita. Installing the bat- conductive material. 5. Do not use a battery pack or tool that is...
Page 21
Care for the environment and take instrument (see Levelling lock). Please use the ori- also void the Makita warranty for the Makita tool them to the collection points provided in accord- ginal case or an equivalent packaging for trans- and charger.
Page 22
1. Reorient or relocate the receiving antenna 2. Increase the separation between the equipment and the receiver Makita SK106D/SK106GD...
Page 23
(e.g. binoculars, telescopes) can be hazardous. CAUTION Looking into the laser beam may be hazardous to the eyes. Wavelength SK106D: 635 +/- 5 nm (red) / SK106GD: 525 +/- 5 nm (green) Maximum radiant output power for clas- sification <1 mW Pulse duration 45 - 70 µs...
Op t i o n a l a c c e s s o r i e s CAUTION These accessories or attachments are recom- mended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to per- sons.