Table of Contents
Advertisement
The lifting capacity is not
sufficient
The lift does not lower when
the lowering button is
pressed
The lift does not lower
smoothly
The motor does not stop
when the lift reaches it
maximum height
If the problems remain unsolved, call for technical support.
Chapter 9 Disposal of used oil
Used oil, which is removed from the power unit and the plant during an oil change, must be treated as a
polluting product, in accordance with the legal prescriptions of the country in which the lift is installed.
Chapter 10 Machine demolition
The machine must be demolished by authorized technicians, just like for assembling. The metallic parts can
be scrapped as iron. In any case, all the materials deriving from the demolition must be disposed of in
accordance with the current standards of the country in which the rack is installed. Finally, it should be
recalled that for tax purposes, demolition must be documented; submitting claims and documents
according to the current laws in the country in which the rack is installed at the time the machine is
demolished.
Capital Automotive Equipment
The suction tube or pump filter is dirty.
Presence of air in the hydraulic system
The pump is faulty
Oil leakages in hydraulic circuit
The
lowering
valve
properly
Presence of air in the hydraulic system
Lubrication of sliders is not enough.
Sliders are damaged
The maximum height limit switch does not
work
Check and clean if needed.
Bleed the hydraulic system
Check the pump and replace if
needed.
Check
leakage
does
not
work
Check the valve and replace if
needed.
Bleed the hydraulic system
Grease
Replace
Check the limit switch and
replace if needed
Model:4PG8000
the
circuit
for
any
Advertisement
Table of Contents
