Table of Contents
Advertisement
Installing/mounting
Installation shall be performed only by qualified personnel in accordance with local
governing regulations.
4.1
Sensing head
The WFS300 sensing head is available in two models: side mount and base mount. The base
mount version should be used if the flowmeter will be subjected to excessive vibration, for
flow rates below 1 t/h, or if handling product temperatures above 60 °C. The side mount
version is factory-installed on Siemens flowmeters designed for side mount sensing heads.
4.1.1
Side mount
1. With the flowmeter housing installed, remove the sensing head cover.
2. Loosen the four sensing head mounting bolts.
3. Place a spirit level on the flat top of the sensing head frame: adjust the level by rotating the
sensing head, and retighten the mounting bolts.
①
12
CAUTION
Mounting bolts
②
Spirit level
Operating Instructions, 03/2021, A5E32880243-AC
4
SITRANS WFS300
Advertisement
Table of Contents
Troubleshooting
