Table of Contents
Related Manuals for Siemens WT47URH80W
Summary of Contents for Siemens WT47URH80W
- Page 1 Tumble dryer WT47URH80W User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 8 Dryness level...... 25 1.1 General information.... 4 8.1 Changing the dryness level.. 25 1.2 Intended use....... 4 8.2 Adjusting the dryness level .. 25 1.3 Restriction on user group... 4 9 Programmes ....... - Page 3 19 Troubleshooting....... 47 14.2 Starting a programme with the wool basket ...... 35 20 Transportation, storage and 14.3 Examples of how to use the disposal ........ 52 wool basket ...... 35 20.1 Preparing the appliance for transportation ...... 52 15 Home Connect ...... 36 20.2 Disposing of old appliance .. 52 15.1 Setting up the Home Con- nect app ......... 37...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶ Do not lift the appliance on your own. If this appliance is not correctly installed in a washer-dryer stack, the installed appliance may fall. ▶...
-
Page 7: Safe Use
Safety en ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. ▶ Never operate a damaged appliance. ▶ Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. - Page 8 en Safety WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff. ▶ Do not drink or reuse the condensation water from the appli- ance. Detergents and care products may result in poisoning if con- sumed.
-
Page 9: Safe Cleaning And Maintenance
Safety en WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. ▶ Do not interrupt the drying programme early. ▶ If drying is interrupted early, remove the laundry immediately and spread it out. CAUTION ‒ Risk of injury! The covering plate may break if you stand on or climb onto the appliance. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-... -
Page 12: Energy Saving Mode
en Installation and connection Open the door. After drying, clean the fluff filter Remove any accessories from the → Page 31. drum. a If the fluff filter is dirty, this reduces Close the door. the air flow in the appliance, ex- tends the programme duration and 4.2 Scope of delivery increases energy consumption. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-... - Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 33.
- Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 34. → Page 33. Connect the appliance to the water outlet.
-
Page 16: Aligning The Appliance
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 29 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Maintenance flap on the base unit → Page 43 Fluff filter → Page 31... -
Page 18: Wool Basket
en Familiarising yourself with your appliance 5.2 Wool basket Securing foot Wool basket Insert Tab for securing in the hook 5.3 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. 5.4 Operating logic Programmes → Page 26 Programme selector... - Page 19 Familiarising yourself with your appliance en tivate the activated settings by re- peatedly pressing on the relevant buttons on the display. ATTENTION! Pressing on the display with force may cause damage. Do not apply heavy pressure on ▶ the display. Do not press on the display using ▶...
-
Page 20: Display
en Display 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 01:25 Timed programme The timed programme is set. → "Timed programmes", Page 27 结束... -
Page 21: Dryness Level
Display en Display Designation Description Cooling process The laundry is cooled while the drum is rotating, in order to avoid damage to the laundry. The process can be cancelled by opening the door. Note: Do not change the programme. Automatic self- The automatic self-cleaning function rinses cleaning the appliance's heat exchanger. - Page 22 en Buttons 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause (mains switch) ¡ Switch on Switch the appliance on or off. ¡ Switch off ¡...
- Page 23 Buttons en Button Selection Description ¡ Selecting ¡ 超干储藏 超干储藏 超干储 藏 activates the dry- ¡ +1 ness level. ¡ +2 The dryness level ¡ +3 defines how damp or dry the laundry is after the programme ends. → "Dryness level", Page 25 ¡...
- Page 24 en Buttons Button Selection Description 60分钟 ¡ Activate Activate or deactivate the crease-reduction func- ¡ Deactivate tion. Once the programme has ended, the drum moves the laundry at regular intervals for 60 minutes to prevent creasing. 120分钟 ¡ Activate Activate or deactivate the crease-reduction func- ¡...
-
Page 25: Changing The Dryness Level
Dryness level en 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Multi-layered, thick laundry The laundry is dry. 超干储藏 that does not dry readily. -
Page 26: Programmes
en Programmes 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 27: Timed Programmes
Programmes en Programme Description Max. load (kg) Antibacteria Dry hard-wearing, heat-resistant fabrics made of cotton or linen. Note: Particularly suitable for strict hy- giene requirements. Sportswear Dry self-drying sportswear made of per- formance fibres, microfibres and synthet- ics. Shirts Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. - Page 28 en Programmes Programme Description Max. load (kg) Time Program Warm Dry all types of fabric except for wool and silk. Suitable for pre-dried or slightly damp laundry and for drying off multi-layered, thick laundry. Min. Load Dry all types of fabric except for wool and silk.
-
Page 29: Accessories
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 53. Order number Connection kit with pull- To save space, stack the WZ2742S out worktop appliance on a suitable washing machine of the same width and depth... -
Page 30: Basic Operation
en operation ¡ Wash small or particularly delicate Adjust the programme settings. ▶ items in a mesh washing bag → "Buttons", Page 22 ¡ Load the laundry unfolded into the Observe the information about op- drum erating logic → Page 18. ¡ Spin the laundry before drying Note: The programme settings are ¡... -
Page 31: Starting The Programme
operation en 12.6 Starting the programme 12.10 Switching off the appli- ance Requirement: A programme is set. → "Setting a programme", Page 30 Press ▶ Press ▶ 12.11 Fluff filter a The display shows the programme duration or the programme end During drying, fluff from the laundry is time. - Page 32 en operation Remove the two-part fluff filter. Open the two fluff filters. Remove the fluff from the recess. Remove the fluff. Ensure that no fluff falls into the air Clean the two fluff filters thoroughly channel. under warm, running water and Disconnect the two-part fluff filter.
-
Page 33: Condensation Container
operation en Close the two fluff filters and put Emptying the condensation them together. container If the drying programme has finished or the display shows a notification while the appliance is in operation, empty the condensation container. Requirements ¡ The display shows the following after drying: "End"... -
Page 34: Childproof Lock
en Childproof lock Inserting the condensation 14 Wool basket container Push the condensation container Use the wool basket to gently dry ▶ in as far as it will go. delicate fabrics, soft toys or sports shoes in a stationary position. Note: You can order this optional → "Accessories", Page 29 from our customer service. -
Page 35: Starting A Programme With The Wool Basket
Wool basket en 14.2 Starting a programme Laundry item Programme duration in with the wool basket hours:minutes ATTENTION! Thin woollen Approx. 1:20 If items of laundry in the wool basket pullover touch the rotating drum or the ribs of Thick woollen Approx. 1:30 - the drum, the laundry may cause ma- pullover 3:00... - Page 36 Pullover operating status. Note: You can find further information in the digital instruction manual by scanning the QR code in the table of contents or on siemens-home.bsh- group.cn. Sports shoes Lift the tongues The Home Connect services are not of the shoes.
-
Page 37: Home Connect
Home Connect en Follow the instructions in the 15.1 Setting up the Home Connect app. Home Connect app 15.3 Activating Wi-Fi on the Install the Home Connect app on your mobile device. appliance Note: When Wi-Fi is activated, the en- ergy consumption increases in com- parison to the values specified in the consumption value table. -
Page 38: Remote Start
en Home Connect a If End is shown on the display, the appliance will transmit the following network settings are reset. types of data to the Home Connect server (initial registration): ¡ Unique appliance identification 15.6 Remote start (consisting of appliance codes as Enable the appliance for remote start well as the MAC address of the via the Home Connect app. -
Page 39: Basic Settings
Basic settings en 16 Basic settings You can configure the basic settings for your appliance to meet your needs. 16.1 Overview of the basic settings Basic setting Symbol Value Description End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 40: Changing The Basic Set- Tings
en Appliance care Preparing the condensation 16.2 Changing the basic set- container for the appliance care tings programme To call up the basic settings, If you are draining the condensation press 静音 . water from the appliance using the a The display shows the selected ba- drain hose, prepare the condensation sic setting and the current value. -
Page 41: Running The Basic Appli- Ance Care Programme
Appliance care en The switch-on process takes a few Requirements seconds. ¡ The appliance care programme is ready. Set the programme to position 1. → "Preparing for appliance care", Page 40 ¡ The appliance care programme is now called up. → "Calling up the appliance care programme", Page 40 Pour approx. -
Page 42: Running The Intensive Appli- Ance Care Programme
en Appliance care ATTENTION! The functionality of 17.4 Running the intensive the appliance may be impaired if appliance care pro- you use the wrong quantity of fab- gramme ric softener, detergent, care product or cleaning agent. You can run the intensive appliance Follow the dosage recommenda- ▶... -
Page 43: Cleaning And Servicing
Cleaning and servicing en a The appliance care programme 18.2 Base unit continues. The base unit is the accessible area a "End" appears on the display and at the bottom of the appliance in a signal tone sounds once the ap- which you will find the heat ex- pliance care programme has changer. - Page 44 en Cleaning and servicing Pull out the heat exchanger cover Clean the insert under running wa- by the handle. ter and dry it off. Clean the opening with a soft, Cleaning the base unit damp cloth. You can remove any visible dirt in the base unit.
-
Page 45: Moisture Sensor
Cleaning and servicing en Insert the heat exchanger cover by ance changes the duration of the the handle. automatic programme depending on the residual moisture in the laundry. Cleaning the moisture sensor Over time, residue from limescale, detergents and care products can build up on the moisture sensor. -
Page 46: Condensation Container Filter
en Cleaning and servicing Remove the filter. 18.4 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. The filter is cleaned automatically when the condensation container is emptied. -
Page 47: Troubleshooting
Troubleshooting en 19 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 48 en Troubleshooting Fault Cause and troubleshooting Home Connect is not Different causes are possible. working properly. Go to www.home-connect.cn. ▶ No connection to the Wi-Fi is switched off. home network. Activating Wi-Fi on the appliance. ▶ → "Activating Wi-Fi on the appliance", Page 37. Wi-Fi is activated but a connection to your home net- work cannot be established.
- Page 49 Troubleshooting en Fault Cause and troubleshooting and programme Rinse the water drain hose with tap water. ▶ terminated. The filter for the condensation tank is soiled. → "Clean the filter for the condensation tank.", ▶ Page 46. Foreign object is located in the base unit → "Opening the base unit", Page 43.
- Page 50 en Troubleshooting Fault Cause and troubleshooting The drying time is too Ensure that the ambient temperature is above 15 ▶ long. °C. Insufficient air circulation at the appliance's installation location. Ventilate the appliance's installation location. ▶ The appliance's ventilation opening is blocked. Ensure that the ventilation opening of the appliance ▶...
- Page 51 Troubleshooting en Fault Cause and troubleshooting The laundry is too After the end of the programme, warm laundry feels damp. damper than it actually is. Remove the laundry from the drum as soon as the drying programme has finished. Spread the items of laundry for cooling. Unsuitable dryness level set.
-
Page 52: Transportation, Storage And Disposal
en Transportation, storage and disposal Empty the condensation container 20 Transportation, stor- → Page 33. age and disposal Insert the condensation container → Page 34. Disconnect the appliance's mains 20.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported. -
Page 53: Customer Service
Customer Service en Information about current disposal ¡ On the rear of the appliance. methods are available from your Make a note of your appliance's de- specialist dealer or local authority. tails and the Customer Service tele- phone number to find them again This appliance is la- quickly. - Page 54 en Applicable standard Safety – Part 1: GB 17625.1 Electromagnetic General require- compatibility – ments Limits – Limits for harmonic cur- GB 4343.1 Electromagnetic rent emissions compatibility re- (equipment input quirements for current ≤16 A household appli- per phase) ances, electric tools and similar GB 4706.20 Safety of house-...
- Page 56 BSH Hausgeräte GmbH Carl-Wery-Straße 34, 81739 München, GERMANY 总经销商：博西家用电器（中国）有限公司 地址： 中国江苏省南京市鼓楼区清江南路18号3幢 客户服务热线：400 889 9999 客户服务电子邮箱： careline.china@bshg.com siemens-home.bsh-group.cn Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001797128* 9001797128 (021124)