Table of Contents
Related Manuals for Siemens WT47U690CS
Summary of Contents for Siemens WT47U690CS
- Page 1 Tumble dryer WT47U690CS User manual and installation instructions Register your product on My Siemens and discover exclusive services and offers. siemens-home.bsh-group.com/welcome The future moving in. Siemens Home Appliances...
-
Page 2: Table Of Contents
Futher information and explanations are available online: Table of contents 1 Safety .......... 4 8 Dryness level...... 24 1.1 General information.... 4 8.1 Changing the dryness level.. 24 1.2 Intended use....... 4 8.2 Adjusting the dryness level .. 24 1.3 Restriction on user group... 4 9 Programmes ....... - Page 3 14 Basic settings...... 33 14.1 Overview of the basic set- tings........ 33 14.2 Changing the basic set- tings........ 33 15 Appliance care ...... 34 15.1 Preparing the appliance for the appliance care pro- gramme ......... 34 15.2 Preparing the condensation container for the appliance care programme..... 34 15.3 Starting the appliance care programme...... 35...
-
Page 4: Safety
en Safety 1 Safety Observe the following safety instructions. 1.1 General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. 1.2 Intended use Only use this appliance: ¡... -
Page 5: Safe Installation
Safety en 1.4 Safe installation WARNING ‒ Risk of electric shock! Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Connect the appliance to a power supply with alternating cur- rent only via a properly installed socket with earthing. ▶... - Page 6 en Safety ▶ If the power cord is too short and a longer one is not available, please contact an electrician to have the domestic installation adapted. WARNING ‒ Risk of injury! The high weight of the appliance may result in injury when lifted. ▶...
-
Page 7: Safe Use
Safety en CAUTION ‒ Risk of cutting! Touching sharp edges on the appliance may lead to cuts. ▶ Do not touch the sharp edges on the appliance. ▶ Wear protective gloves when installing and transporting the ap- pliance. 1.5 Safe use WARNING ‒ Risk of electric shock! If the appliance or the power cord is damaged, this is dangerous. - Page 8 en Safety WARNING ‒ Risk of explosion! If there is coal dust or flour in the air around the appliance, this may cause an explosion. ▶ Keep the area around the appliance clean during operation. WARNING ‒ Risk of poisoning! Condensation water from this appliance is not suitable for drinking and may be contaminated with fluff.
-
Page 9: Safe Cleaning And Maintenance
Safety en ▶ Rinse the laundry thoroughly with warm water and detergent be- fore drying it in the machine. ▶ Do not use the appliance if industrial chemicals have been used to clean the laundry beforehand. WARNING ‒ Risk of fire! If drying is interrupted early, the laundry is not cooled sufficiently and may ignite. - Page 10 en Safety WARNING ‒ Risk of injury! The use of non-original spare parts and non-original accessories is dangerous. ▶ Only use the manufacturer's original spare parts and original ac- cessories. WARNING ‒ Risk of poisoning! Poisonous fumes may be given off if you use cleaning agents that contain solvents.
-
Page 11: Preventing Material Damage
Preventing material damage en Clean the appliance with nothing ▶ 2 Preventing material but water and a soft, damp cloth. Remove all detergent residue, damage ▶ spray residue or other residues im- mediately if they come into contact ATTENTION! with the appliance. The functionality of the appliance may be impaired if you use the wrong quantity of fabric softener, de-... -
Page 12: Energy Saving Mode
en Installation and connection Remove any accessories from the After drying, clean the fluff filter drum. → Page 30. Close the appliance door. a If the fluff filter is dirty, this reduces the air flow in the appliance, ex- 4.2 Scope of delivery tends the programme duration and increases energy consumption. -
Page 13: Requirements For The Install- Ation Location
Installation and connection en 4.3 Requirements for the in- Installation loca- Requirements tion stallation location In a washer-dryer Only use the ori- ATTENTION! stack ginal connection If the appliance is tilted at an angle set from the greater than 40°, residual water may dryer manufac- leak out of the appliance and cause turer when set-... - Page 14 en Installation and connection hose to drain away excess condens- Pull out the condensation hose ation directly into the waste water from the connecting piece. system. Notes ¡ Operate this appliance using the water drain hose provided. If you connect the water drain hose → Page 14, you do not have to regularly empty the condensation container → Page 31.
- Page 15 Installation and connection en Push the water drain hose as far Insert the stopper into the recess as it will go into the connecting in the top. piece. Insert the condensation container Empty the condensation container → Page 32. → Page 31. Connect the appliance to the water outlet.
-
Page 16: Aligning The Appliance
en Installation and connection 4.5 Aligning the appliance Note: You can use the Y-distrib- In order to reduce vibrations and utor → Page 27 noises, align the appliance correctly. to connect the To align the appliance, turn the ap- ▶ water drain hose pliance feet. Check that the appli- of an additional ance is level using a spirit level. -
Page 17: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en 5 Familiarising yourself with your appliance 5.1 Appliance You can find an overview of the parts of your appliance here. On certain models, specific details such as the colour and shape may differ from those pictured. Ventilation opening Condensation container → Page 31 Fluff filter → Page 30... -
Page 18: Control Panel
en Familiarising yourself with your appliance 5.2 Control panel You can use the control panel to configure all functions of your appliance and to obtain information about the operating status. Programmes → Page 25 Programme selector → Page 28 Buttons → Page 21 and dis- play → Page 19 5.3 Operating logic Changing a setting value Some areas of the display respond to touch. -
Page 19: Display
Display en 6 Display The display shows the current settings, options or relevant information. Example: Display Display Designation Description 0:40 Programme dura- Expected programme duration or pro- tion/programme gramme time remaining in hours and time remaining minutes. 00:00 Timed programme The timed programme is set. → "Timed programmes", Page 26 00:45 "Ready in"... - Page 20 en Display Display Designation Description CArE Basic appliance Run the basic appliance care programme. care programme → "Running the basic appliance care pro- gramme on the appliance", Page 35 Cooling process The laundry is cooled while the drum is rotating, in order to avoid damage to the laundry.
- Page 21 Buttons en 7 Buttons Below is an overview of the buttons and their setting options. Button Selection Description ¡ Start Start, cancel or pause the programme. ¡ Cancel ¡ Pause (mains switch) ¡ Switch on Switch the appliance on or off. ¡ Switch off 3 sec ¡...
- Page 22 en Buttons Button Selection Description ¡ Selecting activ- ¡ ates the dryness level. ¡ +1 The dryness level ¡ +2 defines how damp or ¡ +3 dry the laundry is after the programme ends. → "Dryness level", Page 24 ¡ The dryness level can be adjusted by select- ing +1 , +2 or +3 .
- Page 23 Buttons en Button Selection Description 60 min ¡ Activate Activate or deactivate the crease-reduction func- ¡ Deactivate tion. Once the programme has ended, the drum moves the laundry at regular intervals for 60 minutes to prevent creasing. 120 min ¡ Activate Activate or deactivate the crease-reduction func- ¡...
-
Page 24: Changing The Dryness Level
en Dryness level 8 Dryness level Each automatic programme has a specified dryness level. The dryness level defines how dry or damp your laundry is after the programme ends. Dryness level Laundry Drying result Multi-layered, thick laundry The laundry is dry. that does not dry readily. Normal, single-layered The laundry is dry. -
Page 25: Programmes
Programmes en 9 Programmes You can dry your fabrics using either an automatic programme or a timed pro- gramme. 9.1 Automatic programmes Automatic programmes are pro- Tips grammes in which humidity sensors ¡ Select the dryness level according measure the residual moisture in the to the type of fabric or the desired laundry during the drying cycle. -
Page 26: Timed Programmes
en Programmes Programme Description Max. load (kg) košile/halenky Suitable for shirts and blouses made of cotton, linen, synthetics or blended fab- rics. Note: For optimal drying results, dry a maximum of 5 shirts or 5 blouses at the same time. Once the laundry is dry, iron it or hang it up. -
Page 27: Accessories
Accessories en 10 Accessories Use original accessories. These have been made especially for your appli- ance. Note: Some accessories are avail- able in other colours. Contact → "Customer Service", Page 48. Order number Connection kit To save space, stack the WZ27410 appliance on a suitable washing machine of the same width and depth and that is from the... -
Page 28: Laundry
en Laundry operation 11 Laundry 12 Basic operation operation 11.1 Preparing the laundry 12.1 Switching on the appli- ance ATTENTION! Objects remaining in the laundry may Requirement: The appliance has damage the laundry and the drum. been correctly installed and connec- Remove all items from any pock- ted. -
Page 29: Saving The Programme Settings
operation en Note: If "Hot" appears, the appli- 12.4 Saving the programme ance cools the laundry. settings When "Hot" goes out, the laundry has cooled down. You can save your individual pro- gramme settings as favourites. 12.7 Adding laundry Requirements ¡ A programme is set. After the programme starts, you can → "Setting a programme", Page 28 remove or add laundry at any time. -
Page 30: Fluff Filter
en operation Remove the fluff from the recess. 12.11 Fluff filter During drying, fluff from the laundry is collected in the fluff filter. The fluff fil- ter protects the appliance from fluff. Cleaning the fluff filter If the drying programme has finished or the display shows a notification while the appliance is in operation, clean the fluff filter. -
Page 31: Condensation Container
operation en Remove the fluff. Insert the two-part fluff filter. Clean the two fluff filters thoroughly Close the door. under warm, running water and then dry them off. 12.12 Condensation con- tainer Condensation forms during drying, which your appliance uses for auto- matic cleaning. -
Page 32: Childproof Lock
en Childproof lock Pull out the condensation con- Push the condensation container ▶ tainer, keeping it level. in as far as it will go. Empty the condensation container. 13 Childproof lock Secure your appliance against being operated unintentionally using the controls. 13.1 Activating the childproof lock Press and hold 3 sec for ap-... -
Page 33: Basic Settings
Basic settings en 14 Basic settings You can configure the basic settings for your appliance to meet your needs. 14.1 Overview of the basic settings Basic setting Symbol Value Description End signal 0 (off) Set the volume of the signal at the 1 (quiet) end of the programme. -
Page 34: Appliance Care
en Appliance care Empty the condensation container 15 Appliance care → Page 31. 15.1 Preparing the appliance for the appliance care programme The appliance must be prepared be- fore basic or intensive appliance care is carried out. Requirement: The fluff filter has been cleaned. → "Cleaning the fluff filter", Page 30. Remove the laundry. -
Page 35: Starting The Appliance Care Programme
Appliance care en Insert the plug from below. Set the programme to position 1. a The condensation container is Press and hold ready for the appliance care pro- Set the programme to position 4. gramme. Release Note: If the condensation is drained a "CP1" and the programme dura- using the drain hose, perform the tion alternate on the display. - Page 36 en Appliance care Add approx. 1 ½ litres of hot tap Pull out the condensation con- water into the condensation con- tainer, keeping it level. tainer. Empty the condensation container Hold the full condensation con- → Page 31. tainer level so that no liquid spills out.
-
Page 37: Preparing The Appliance For The Intensive Appliance Care Programme
Appliance care en → "Preparing the condensation con- 15.6 Running the intensive tainer for the appliance care pro- appliance care pro- gramme", Page 34 in reverse order, gramme after both the intensive and regular cleaning processes. Pull out the condensation con- tainer horizontally and empty it. 15.5 Preparing the appliance for the intensive appli- ance care programme... - Page 38 en Appliance care Insert the condensation container Add approx. 1 ½ litres of hot tap so that it locks into place. water into the condensation con- tainer. Press . The appliance care Hold the full condensation con- programme starts and an audible tainer level so that no liquid spills signal sounds.
-
Page 39: Ending The Intensive Appli- Ance Care Programme
Appliance care en Pull out the condensation con- 15.7 Ending the intensive ap- tainer, keeping it level. pliance care programme Add approx. 1 ½ litres of hot tap water into the condensation con- tainer. Empty the condensation container → Page 31. Hold the full condensation con- tainer level so that no liquid spills out. -
Page 40: Cleaning And Servicing
QR code in the table of contents or on siemens-home.bsh- Note: If you do not clean the appli- group.com . ance as described, the appliance's functionality may be impaired. -
Page 41: Condensation Container Filter
Cleaning and servicing en Remove the filter. 16.3 Condensation container filter During drying, fluff from the laundry gets into the condensation. The filter in the condensation container pro- tects the appliance from fluff. Clean the filter for the condensation tank. The filter is cleaned automatically when the condensation container is emptied. -
Page 42: Troubleshooting
en Troubleshooting 17 Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 43 Troubleshooting en Fault Cause and troubleshooting Appliance paused, but Cooling process active. the drum is rotating. Not a fault – no action required. ▶ Creasing. The load is too large. Observe the maximum load capacity of the ▶ → "Programmes", Page 25. The laundry lies in the drum for too long after drying. Remove the laundry from the drum as soon as the drying programme has finished.
- Page 44 en Troubleshooting Fault Cause and troubleshooting Condensation in the The appliance uses condensation for the automatic condensation tank self-cleaning. even though the water Not a fault – no action required. ▶ drain hose is connec- Water drain hose is not connected correctly. ted.
- Page 45 Troubleshooting en Fault Cause and troubleshooting Automatic self-cleaning function rinses the appliance's heat exchanger. Not a fault. Do not pull out the condensation tank. Do not cancel the programme. Water is leaking from Appliance is not correctly aligned. the appliance. → "Aligning the appliance", Page 16 ▶...
- Page 46 en Troubleshooting Fault Cause and troubleshooting Odours have formed Stubborn dirt in the appliance or an extended appli- in the appliance. ance downtime of more than one month. → "Preparing the appliance for the intensive appli- ▶ ance care programme", Page 37.
-
Page 47: Transportation, Storage And Disposal
Transportation, storage and disposal en Empty the condensation container 18 Transportation, stor- → Page 31. age and disposal Insert the condensation container → Page 32. Disconnect the appliance's mains 18.1 Preparing the appliance plug from the power supply. for transportation a The appliance is now ready to be transported. -
Page 48: Customer Service
en Customer Service Information about current disposal 19.1 Product number (E-Nr.) methods are available from your and production number specialist dealer or local authority. (FD) This appliance is la- You can find the product number (E- belled in accordance Nr.) and the production number (FD) with European Directive on the appliance's rating plate. -
Page 49: Consumption Values
Consumption values en 20 Consumption values The programme The actual values may deviate from the indicated values depending on bavlna (denoted by the arrow symbol) is the type of fabric, composition of suitable for drying cotton laundry with laundry to be dried, residual moisture a normal dampness level, and is the in the fabric, set degree of dryness, most efficient programme for drying... -
Page 50: Technical Data
en Technical data Programme Final Load Spin Initial Pro- Energy mois- (kg) speed mois- gramm con- ture (rpm) ture e dura- sump- level level tion tion (h:min) (kWh/ cycle) nemačkavé prádlo 0:57 0.43 nemačkavé prádlo 1:06 0.53 Ambient temper- ¡ Minimum: 21 ... - Page 52 Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom Manufactured by BSH Hausgeräte GmbH under the trademark licence of Siemens AG *9001734271* 9001734271 (020830)