Turning On The Power; Selecting The Sources And Starting Play - JVC UX-A52R Service Manual
Hide thumbs
Also See for UX-A52R:
- Gebruiksaanwijzing (48 pages) ,
- Instructions manual (84 pages) ,
- Instructions manual (45 pages)
Table of Contents
Advertisement
Turning On the Power
When you press the play buttons (CD 3 / 8, TAPE 2 3)
for a particular source or FM/AM and AUX/MD, the unit
automatically turns on (and starts playback if the source is
ready.)
To turn on the unit without playing, press
STANDBY/ON.
The STANDBY/ON lamp on the electronic swing panel
lights green.
To turn off the unit (on standby), press
STANDBY/ON again.
The STANDBY/ON lamp on the electronic swing panel
lights red.
• "0:00" appears on the display until you set the
built-in clock. After setting the clock, the clock time will
appear on the display while the unit is turned off (on
standby.)
• A little power is always consumed even while the unit is
on standby.
To set the built-in clock, see page 34.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock setting, the tuner preset stations and other settings will
be erased.
Selecting the Sources and Starting Play
To select the tuner, press FM/AM.
The unit automatically turns on (when the unit is on
standby) and the last selected station is tuned in.
Each time you press FM/AM, the band alternates between
FM and AM (MW/LW.)
• For more detailed operations, see pages 14 to 19.
To select the CD player, press CD 3 / 8.
The unit automatically turns on (when the unit is on
standby), and "CD" appears on the display. Play will start if
a CD is on the disc tray. ("NO DISC" will appear on the
display if a CD is not loaded.)
To stop playback, press 7.
• For more detailed operations, see pages 20 to 24.
To select the cassette deck, press TAPE 2 3.
The unit automatically turns on (when the unit is on
standby), and "TAPE" appears on the display. Play will
start if a cassette is in the cassette loading slot. ("NO
TAPE" will appear on the display if a cassette is not in the
cassette loading slot.)
To stop playback, press 7.
• For more detailed operations, see pages 25 and 26.
To select external equipment, press AUX/MD.
The unit automatically turns on (when the unit is on
standby), and "AUX" appears on the display.
• For more detailed operations, see pages 27 and 28.
• For operating the external equipment, see the manuals
supplied with them.
– 11 –
Advertisement
Chapters
Table of Contents
