Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
About this task
Steps
1. Remove the screw (M2x3) that secures the optical-drive assembly to the palm-rest and keyboard assembly.
2. Using a screwdriver, carefully push the optical-drive assembly through the slot to release the optical-drive assembly out of
the optical-drive bay.
3. Slide the optical-drive assembly out of the optical-drive bay.
4. Remove the two screws (M2x3) that secure the optical-drive bracket to the optical drive.
5. Remove the optical-drive bracket from optical drive.
Removing the optical drive
computer. After working inside your computer, follow the instructions in
After working
www.dell.com/
Removing the optical drive
6
17
Advertisement
Table of Contents
