Table of Contents
Advertisement
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following
information.
Customer service will charge you for advice – even if the appliance is still under
guarantee!
Fault
Temperature differs greatly
from the set value.
The light does not function.
The temperature
in the refrigerator
compartment is too cold.
The refrigerating unit
is switching on more
frequently and for longer.
Appliance has no
refrigeration capacity.
The light does not work.
The display does not
illuminate.
Possible cause
The LED light is defective.
Appliance was open too
long.
Light is switched off after
approx. 10 min.
Temperature has been set
too low.
Appliance opened
frequently.
The ventilation openings
have been covered.
Appliance has been switched
off.
Power failure.
The fuse has been switched
off.
The mains plug has not been
inserted properly.
Remedial action
In some cases it is adequate to switch off
the appliance for 5 minutes.
If the temperature is too high wait a few hours
and check whether the temperature has
approached the set value.
If the temperature is too low check
the temperature again the next day.
See chapter "Light (LED)" section.
When the appliance is closed and opened,
the light is on again.
Increase the temperature (see Selecting
the temperature).
Do not open the appliance unnecessarily.
Remove obstacles.
Press the On/Off button.
Check whether the power is on.
Check the fuse.
Check whether the mains plug is secure.
en
15
Advertisement
Table of Contents
