Advertisement
Quick Links
Advertisement
Related Manuals for Makita VS001GZ
Summary of Contents for Makita VS001GZ
- Page 1 INSTRUCTION MANUAL Cordless Vacuum Sweeper VS001G Read before use.
- Page 2 WARNING • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge. • For users in Europe: Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children with- out supervision.
- Page 3 Symbols Safety precautions The followings show the symbols which may be used Cordless vacuum sweeper safety for the equipment. Be sure that you understand their warnings meaning before use. Operators shall be adequately instructed on Read instruction manual. the use of the vacuum sweeper. This vacuum sweeper is for dry use only.
- Page 4 Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water or rain.
- Page 5 Charge the battery cartridge with room tem- Tips for maintaining maximum perature at 10 °C - 40 °C (50 °F - 104 °F). Let battery life a hot battery cartridge cool down before charging it. Charge the battery cartridge before completely dis- charged.
- Page 6 Introduction of separately sold items CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
- Page 7 Align the hooks (2 locations) of the side brush with If the handle is loose and rattles the mounting holes and attach the side brush. If the handle is loose and rattles even though the handle The hooks (2 locations) of the side brush can be aligned lock lever is properly locked, adjust it by tightening the with any of the 6 holes.
- Page 8 Removal Indicator lamps Remaining capacity While pinching inward on the grips of the hooks, remove the side brush. Lighted Blinking 75% to 100% 50% to 75% 25% to 50% 0% to 25% Charge the battery. The battery may have malfunctioned. NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity.
- Page 9 Protection function Things to know before use This appliance is equipped with a protection function. When one of the following conditions occurs, the protec- Transporting the appliance tion function automatically stops all motors. The lamps on the control panel indicates the error state. CAUTION: Before transporting the appliance, make sure the ON/OFF switch is turned off and...
- Page 10 Let the appliance and battery(ies) cool down. battery “1” unless battery “2” is exhausted or the ON/ OFF switch is turned off. If no improvement can be found by restoring protection system, then contact your local Makita Service Center. • Mounting one battery The mounted battery is detected automatically.
- Page 11 Turn the main brush height adjusting knob to adjust the How to check the appropriate main height of the main brush. brush height Turn the knob in the direction indicated by the arrow to reduce the height of the main brush (to adjust towards NOTICE: Observe the appropriate height. Too more contact with the floor). much pressure on the main brush accelerates the wear of the main brush and shorten run-time.
- Page 12 Turning the side brush on or off Side brush height adjustment When the side brush is on, the height is adjustable. The side brush can be used to extend the cleaning Adjust appropriately depending on the condition of the width and also used to clean the areas along walls. floor to be cleaned, the length of the side brush, etc. To use the side brush, hold down the lock off button and Turn the side brush height adjusting knob to adjust the lower the side brush ON/OFF lever. height of the side brush.
- Page 13 Push the handle to start cleaning. Starting cleaning Hold the appliance firmly during CAUTION: use. Also, do not leave the appliance unattended regardless of whether the appliance is on a slope or not. The appliance may move and cause an accident.
- Page 14 Turns the lamps on or off Changing the suction mode When power is turned on, each press of the [suction Pressing the [lamp button] toggles the lamps between on and off. button] switches the suction power mode. Button/LED Button/LED Mode Function Mode Function indication indication...
- Page 15 Removal Fit the hook onto the appliance and lower the hook to secure the waste container in place. Raise the hook of the waste container. Using the dust bag Remove the hook from the appliance. Optional accessory Fig.30 ► 1 . Dust bag 2. Transparent window •...
- Page 16 Attach the groove of the dust bag frame to the Removal waste container shaft of the appliance. Reverse the steps of the attachment procedure. Attaching a polyethylene bag NOTICE: When attaching a polyethylene bag, it may be difficult to see inside of the dust bag. Attaching a polyethylene bag to the dust bag gives you the convenience when it is time to discard refuse, because discarding work can be completed by simply removing and throwing away the polyethylene bag with...
- Page 17 Tighten the four screws to secure the multifunction Using a multifunction adapter adapter in place. Optional accessory Attaching a multifunction adapter makes it possible to mount a Makpac or portable power pack. CAUTION: Properly secure the multifunction adapter in place using the supplied screws. CAUTION: Properly secure the Makpac or portable power pack in place by using the latches...
- Page 18 • PDC01 Mounting a Makpac Fit the bottom edge of the portable power pack onto CAUTION: Do not exceed the height 315 mm hooks A and secure it in place with hooks C. Hook B is (12-3/8") when mounting the Makpac. not used.
- Page 19 As shown in the figure, arrange the cord so it PDC01 passes through the groove in the multifunction adapter Remove the plug of the adapter (for the XGT and the battery box. Align the adapter (for the XGT battery) from the socket of the portable power pack and battery) with the groove in the battery insertion opening, remove the cord.
- Page 20 When using the dust bag, raise the grip and lift out the MAINTENANCE dust bag. CAUTION: Always be sure that the appli- ance is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance. NOTICE: Never use gasoline, benzine, thinner, alcohol or the like.
- Page 21 In like manner, remove the other main brush. Orient each main brush so that the shapes of the ends match the mounting areas of the appliance, as If there is string-like refuse adhered to the shown in the figure. brushes, remove it by hand. If the shapes of the ends do not match, reverse the left- right orientation of the main brush so they match.
- Page 22 Fit a main brush into mounting area of the appliance, in the Mount the side brush. direction indicated by the arrow in the figure, and secure it in place. NOTE: If the side brush is worn down to a shorter length, replace it. Cleaning the filters Make sure the filters are mounted CAUTION: properly, and do not use the appliance when the filters are not in place.
- Page 23 Cleaning the sponge filter Shake off dust, and wash the filters with water if they are very dirty. After washing, leave the prefilter and HEPA filter to dry in the shade; do not use them until After cleaning the sponge filter, be CAUTION: they are completely dry. sure to install it on the waste container. If washed in water, dry it up before installing. When the sponge filter is clogged with dust, remove it from the waste container and then wipe it off or wash in water. Remove the sponge case from the waste container.
- Page 24 Daily inspections If the main brushes and side brush become worn out, • Waste container: empty the container. ask your local Makita service center for replacement. • Filters: if they are dirty, cleaning them. Replacing the main brushes •...