Turn off electric power supply before setting DIP switches.
There is risk of electric shock, physical injury or death.
Figure 9: Dip Switch Settings.
Option switch 1
Figure 10: Dip Switch 1.
Dip switch SW1
Note
* Possibility to allow colder water temperature by setting.
Bridge at CN_ANTI_SW on indoor PCB must be disconnected to enable setting.
As Main
As Sub
Due to our policy of continuous product innovation, some specifications may change without notification.
©LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. "LG" is a registered trademark of LG Corp.
DIP SWITCH SETTINGS
MONOBLOC | 19