Unplug DC-in cable connector
When installing: Ensure that the connectors are attached firmly.
Remove the system board in the direction shown by arrow
When installing: When attaching the system board to the base cover, adjust the placement of the USB ports
as shown in
a
, and make sure that they are attached to the holes on the base cover as shown. Improper
placement of those jacks might cause a damage.
1110 Battery Board, Thermal fan assembly and Heat Sink assembly
For access, remove these FRUs in order:
•
"1010 External battery pack" on page 62
•
"1020 Keyboard" on page 62
4
.
a
a
5
.
.
Chapter 10
Removing or replacing a FRU
79