Vrrp Authentication Settings - D-Link DGS-3324SRi User Manual
Xstack stackable gigabit layer 3 switch
Hide thumbs
Also See for DGS-3324SRi:
- User manual (392 pages) ,
- Command line interface reference manual (357 pages) ,
- User manual (362 pages)
Table of Contents
Advertisement
VRID
Virtual IP Address
Virtual MAC Address
Virtual Router State
Admin. State
Priority
Master IP Address
Critical IP Address
Checking Critical IP
Advertisement
Interval
Preempt Mode
Virtual Router Up
Time
VRRP Authentication Settings
The VRRP Authentication Settings window is used to set the authentication for each Interface configured for VRRP.
This authentication is used to identify incoming message packets received by a router. If the authentication is not consistent
with incoming packets, they will be discarded. The Authentication Type must be consistent with all routers participating
within the VRRP group.
To view the following window, click Configuration > Layer 3 IP Networking > VRRP > VRRP Authentication
Settings.
xStack Stackable Gigabit Layer 3 Switch Manual
VRRP packets received by a virtual router, for authentication.
IP Authentication Header - An MD5 message digest algorithm has been
selected to compare VRRP packets received by a virtual router, for
authentication.
Displays the virtual router ID set by the user. This will uniquely identify the VRRP
Interface on the network.
The IP address of the Virtual router configured on the Switch.
The MAC address of the device that holds the Virtual router.
Displays the current status of the virtual router. Possible states include Initialize,
Master and Backup.
Displays the current state of the router. Up will be displayed if the virtual router is
enabled and Down, if the virtual router is disabled.
Displays the priority of the virtual router. A higher priority will increase the probability
that this router will become the Master router of the group. A lower priority will
increase the probability that this router will become the backup router. The lower the
number, the higher the priority.
Displays the IP address of the Master router for the VRRP function.
Displays the critical IP address of the V RRP function. This address will judge if a
virtual router is qualified to be a master router.
Displays the status of the Critical IP address. May be enabled or disabled.
Displays the time interval, in seconds, which VRRP messages are sent out to the
network.
Displays the mode for determining the behavior of backup routers set on this VRRP
interface. True will denote that this will be the backup router, if the routers priority is
set higher than the master router. False will disable the backup router from becoming
the master router.
Displays the time, in minutes, since the virtual router has been initialized
Figure 6- 140. VRRP Authentication Settings window
199
Hide quick links:
Advertisement
Table of Contents
