Advertisement
Accessory Bag Holder Bracket Assembly
(Fig.C)
Attach 2 accessory bag holder brackets to tank with 4 self-
tapping screws provided.
Fig. C
Accessory Bag Holder Assembly (Fig. D)
Place the accessory bag holder into the hole of bracket. (See
illustration).
Fig. D
WARNING: To reduce the risk of fire or explosion, do
not operate this vac in areas with flammable gases,
vapors or explosive dust in the air. Flammable gases
or vapors include but are not limited to: lighter fluid,
solvent-type cleaners, oil-based paints, gasoline,
alcohol or aerosol sprays. Explosive dusts include
but are not limited to: coal, magnesium, aluminum,
and grain or gun powder. Do not vacuum explosive
dust, flammable or combustible liquids or hot ashes.
Do not use this vac as a sprayer for any flammable
or combustible liquid. To reduce the risk of health
hazards from vapors or dusts, do not vacuum toxic
materials.
WARNING: The operation of any utility vac can result
in foreign objects being blown into the eyes, which
can result in severe eye injury. Always wear safety
goggles complying with ANSI Z87.1 (or in Canada,
CSA Z94.3) before starting operation.
CAUTION: To reduce risk of hearing loss, wear ear
protectors when using the vac for extended hours or
when using it in a noisy area. The unit is ready for dry
vacuuming or blowing. After you plug the power cord
into the wall receptacle, turn the unit "ON" by pushing
the switch position with 1 embossing straps is the
"ON" position.
Fig. E
ON
Activation Position
OPERATION
WARNING: Always observe the safety instructions
and applicable regulations.
WARNING: To reduce the risk of serious
personal injury, turn unit off before making any
adjustments or removing/installing attachments
or accessories. An accidental start-up can
cause injury.
CONNECTING POWER TOOL
1. Make sure the
ON/OFF
and the power supply is not connected.
2. Connecting the tool to the vacuum first, then connect
the power supply and turn ON/OFF switch to the
ACTIVATION position ( I I ), at this time the power tool
and the vacuum cleaner can start to use simultaneously.
WARNING: Use the vacuum cleaner's socket outlet
only for connection of an external power tool. The
vacuum cleaner is automatically switched on and off
via the connected power tool.
The connected load of the power tool may not exceed
the maximum connected load PA of the vacuum
cleaner's socket outlet. Please also observe the
English
ON
switch is in the 'OFF' position
OFF
5
Advertisement
