Poweredge M905 Jumper Settings - Dell 8 Owner's Manual
Poweredge modular systems
Hide thumbs
Also See for 8:
- Command reference manual (302 pages) ,
- Update manual (186 pages) ,
- Getting started manual (172 pages)
Table of Contents
Advertisement
PowerEdge M905 Jumper Settings
Figure 7-2 shows the location of the configuration jumpers on the blade
system board. Table 7-2 lists the jumper settings.
NOTE:
Figure 7-2 is oriented with the front end of the blade system board facing to
the right.
Table 7-2. PowerEdge M905 Jumper Settings
PSWD_EN
NVRAM_CLR
310
System Board Information
(default) The password feature is enabled.
The password feature is disabled.
(default) The configuration settings are retained at
system boot.
The configuration settings are cleared at the
next system boot. (If the configuration settings
become corrupted to the point where the
system does not boot, install the jumper and
boot the system. Remove the jumper before
restoring the configuration information.)
- Quick Links:
- I/O Connectivity
- Troubleshooting Hard Drives
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
