Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for LG N2R1D - NAS Server
Summary of Contents for LG N2R1D - NAS Server
- Page 1 User Guide and Instruction Manual LG Network Storage N2B1 / N2R1...
-
Page 2: Safety Warning
Safety warning Safety warning Note Do not place any objects within 15cm of the unit. The unit reaches high temperatures creating the risk of burn injuries. Only use compatible devices with the system ports, or the system and devices risk being damaged. Do not use damaged disks. - Page 3 Safety warning Related to damage to the HDD and data: - during installation or disconnection of the system, ensure that the system does not experience any external physical shocks. - During the operation of the HDD, short surges and stoppages of power may cause the system to turn off and on quickly.
- Page 4 Safety warning Warning Do not use damaged electrical cords. This may cause electric shock, and is a fire hazard. Use a grounded cord and grounded socket to avoid electric shock and damage to components. Do not handle the electrical cord with wet hands, as this may cause shock and injury.
- Page 5 Safety warning In the event of dropping the system, contact the service centre for advice and possible service. Not doing this creates the risk of damage, fire and electric shock. Keep the system away from direct sunlight to avoid overheating, and melting of the case, which may eventuate in fire and injury.
-
Page 6: Table Of Contents
Information Mode ..............35 IP SETTING MODE ..............37 USB Back-up Mode ..............39 ODD Backup Mode ..............41 Backup data on discs using LG Network Storage (ODD Backup) ....41 Hibernation Mode ................44 Tray open / close (DISC OPEN button) .........45... - Page 7 Contents . LG Network Storage Web Menu Use (for LG Network Storage administrators) ........ System Settings ..............46 Network ................. 46 Host ....................47 Interface ..................47 Workgroup/Domain................50 Remote Access ............... 51 DDNS (Dynamic DNS) .................51 Date & Time ................53 Date and Time Setup ................53 NTP Set-up ..................54...
- Page 8 Contents LG Network Storage Share Management ......76 User ..................76 Group ..................78 Folder ................... 80 Blu-ray / DVD ..............82 Burning .................. 82 Service ................86 DLNA(Digital Living Network Alliance) ........86 Network Server ............... 90 FTP ....................90 AFP ....................92 Network Printer ............... 93 iTunes ...................
- Page 9 Top menu ..............134 File Viewer ................134 . LG Network Storage via network drive ....1 Accessing the LG Network Storage data in Windows OS ..138 MAC OS connection ............142 Linux OS access ............. 145 . LG Network Storage Maintenance ....1 LG Network Storage shut down/restart ......
-
Page 10: Introduction
LG Network Storage Introduction Thank you for purchasing the LG Network Storage. 1) Now the LG Network Storage basic data-save and share functions can be used in Windows, Mac and Linux operating systems. 2) Similarly, the internal Blu-ray / DVD rewriter can be used to efficiently save data securely for long periods. -
Page 11: Supported Os
1. Introduction 4) The LG Network Storage also allows for mobile synchronization, without the use of a PC, as mobile devices can be directly synchronized to the LG Network Storage. This user manual contains express installation information as well as detailed options and functions. -
Page 12: Package Contents
1. Introduction Package Contents ∙ LG Network Storage ∙ Product warranty ∙ ‘LG Network Storage PC Software ∙ Quick install guide Installer’ Quick install guide ∙ Power cord and adaptor ∙ LAN cable ∙ Hard disk fastening screw (x8) –... -
Page 13: Name Of Each Part
1. Introduction Name of Each Part <Front> <Back> ⑤ ⑦ ⑧ ⑥ ② ③ ② ④ ③ ① ④ ① ⑨ ⑦ ⑥ ⑤ ⑪ ⑩ ① USB port: USB 2.0 interface ① Power button: power on, off (to ② LAN port: LAN cable connection. turn off power, hold button in for 3 ③... -
Page 14: Lg Network Storage Installation
<LG Network Storage connection> Hard disk installation and setup The LG Network Storage hard disk rack is shown below. Refer to each part while installing the HDDs. Components of Hard Disk Rack Hard Disk Rack Lever... - Page 15 2. LG Network Storage Installation ① First, ensure that the power is off. ② Open the front cover of the LG Network Storage main system. ③ Unlock the hard disk rack by pushing the lock button upward. ④ Hold down the hard disk rack lever and pull the hard disk rack to separate it from the main system.
- Page 16 ⑥ Match the hard disk rack label number and the LG Network Storage front panel number, to insert the hard disk rack into the slot. ⑦ Push the hard disk rack into the LG Network Storage main system until it makes a click.
- Page 17 2. LG Network Storage Installation ⑧ To prevent accidental detachment of the hard disk rack, push down the lock button. ⑨ Similarly repeat the installation procedure for all the hard disks, one by one.
-
Page 18: Lg Network Storage Installer' Installation (Lg Network Storage System File Installation,Volume And Raid Configuration)
Storage system file installation,volume and RAID configuration) Use the included “LG Network Storage Installer” disc for automatic system installation and hard disk volume configuration. ① Connect the enclosed power adaptor to the DC jack. Plug the “power cord” into an electrical outlet. - Page 19 2. LG Network Storage Installation ④ System loads system files as it reboots. LG Network Storage shall not be accessed during the system reboot process. ⑤ After approximately 60 seconds, system reboot is completed with a light alarm sound. (In the case that network connection has been activated) ⑥...
-
Page 20: Lg Network Storage Connection
If the LG Network Storage is connected directly to the PC without another network device, it must be connected directly to the PC using a LAN cable, the LG Network Storage IP must be set to DHCP, the PC’s IP set to automatic setting and the... -
Page 21: Lg Network Storage Pc S/W Installer' Installation (Pc Application Program Installation And Usage)
2. LG Network Storage Installation * If the LG Network Storage is directly connected to the PC through a LAN cable, the PC’s local internet will not be accessed In this case, PC Internet may be disconnected. ② After checking that the LG Network Storage power cable has been connected, press the power button in the front to activate the LG Network Storage. - Page 22 2. LG Network Storage Installation Available programs for installation may vary depending on user’s OS environment Supported Operating System Program Windows Linux Acrobat Reader Flash Player NAS Detector NAS Monitor Comnso Backup CyberLink Photo DVD Album...
-
Page 23: Pc Application Program Installation
2. LG Network Storage Installation PC application program installation ① Insert the “LG Network Storage PC Software Installer” CD in the PC’s optical drive (CD/DVD/BD drives). After a short while, the following menu will appear. * Installation on PCs without a fiber optic drive may be processed using the iSCSI function of LG Network Storage. -
Page 24: Pc Application Program Usage
Address, and Host Name information are displayed on the screen. The factory default settings are shown below. - IP Address: 192.168.1.200 - MAC Address: serial number for each LG Network Storage product is printed in the back label. - Host Name : LG-NAS... - Page 25 <IP Setup>. ③ If the search result of the LG Network Storage information is chosen, as well as default network information of the LG Network Storage, including the Subnet mask, Default Gateway and DNS, ‘Change Network Info’, ‘Open Web Menu’ and ‘Open Network Folder’...
- Page 26 * If no IP address is allocated, use the IP address “NAS Detector” or check the DHCP option and automatically assign an IP address ⑤ If the ‘Open Web Menu’ button is clicked, the web menu of the selected LG Network Storage can be accessed.
- Page 27 ⑦ In selecting “Open Web Menu” or “Open Network Folder”, a pop up message appears with “Yes”, which when selected will produce a shortcut icon on the desk top, and after which the LG Network Storage web menu and network folder can be easily accessed.
- Page 28 Blu-ray/DVD drives and synchronized storage of mobile devices. ① Double click on the LG Network Storage web menu shortcut button. ② The LG Network Storage web menu can be used, after inputting user ID and password. The LG Network Storage default ID and password are ‘admin’ and ‘admin’.
- Page 29 ② The LG Network Storage Blu-ray/DVD drive under folder name “cdrom” and “service” / “volume” will appear. ③ To view the contents of the disc inserted in the LG Network Storage, double-click on the ‘cdrom’ folder, and to access the LG Network Storage hard disc, double- click on either folder ‘volume1’...
- Page 30 2. LG Network Storage Installation <Using the NAS Monitor> The NAS Monitor offers various functions for the user to easily utilize the LG Network Storage. For example, user can access the network folder or web pages by simply clicking the MAS Monitor menu.
- Page 31 This is used to log on to the FTP server. <NAS detector> The NAS Detector program is run to change the IP address of the LG Network Storage. This menu will properly function only after the NAS Detector has been completely installed.
-
Page 32: Lcd Panel And Front Button Usage
. LCD panel and front button usage . LCD panel and front button usage Once the booting is complete, the default LG Network Storage screen will be as follows. * If the LAN cable is unplugged, the network icon ( ) will not appear on the LCD window. -
Page 33: Icon Description
(DHCP) or in the process of acquiring IP address. ② Icon is activated when user has logged on to LG Network Storage by opening the network folder. ③ Icon is activated when the memory card/USB/e-SATA devices are connected. -
Page 34: Action Set-Up ('←', '→' Buttons)
. LCD panel and front button usage Action set-up (‘←’, ‘→’ buttons) Pressing the ‘←’, ‘→’ buttons in the front will allow access to various functions of LG Network Storage. Action modes activated by using the arrow keys are as follows: Action modes comprises 6 modes of [Stand-by Screen] –... -
Page 35: Information Mode
. LCD panel and front button usage Information Mode Information Mode shows the current status and information of LG Network Storage. Once in the [Information Mode], user may use the arrow keys to move through [IP Address Information] – [System Firmware Version] – [HDD Usage Capacity] – [Date and Time] –... - Page 36 * If the volume is not configured in advance, ‘HDD Config First’ will appear. [Date and Time Information] This shows the current date and time set up in the LG Network Storage. [FAN RPM Information] This allows to check the current Fan rotation per minute of LG Network Storage.
-
Page 37: Ip Setting Mode
. LCD panel and front button usage IP SETTING MODE The LG Network Storage IP can be set up by using the Set key and entering [IP SETTING MODE]. The arrow keys may be used to navigate through menus [Manual IP set-up] –... - Page 38 ⑧ Set up the gateway address following the procedure for the IP address set-up. * LG Network Storage recommends that user manually sets up the IP address given to the IP administrator in order to prevent potential clashes with a router or any...
-
Page 39: Usb Back-Up Mode
This will allow to distinguish this folder from other devices in the future. Subfolders will be created by back-up date to save all contents of the USB or the memory card in LG Network Storage. - Page 40 . LCD panel and front button usage Folder names will be set up automatically as follows: Saved in Folder name Service/back-up/ Manufacture company name_Serial No./ File back-up format /Date folder created ※ In the case of simple back-ups, if one storage device is backed up several times, the data from the final back-up will be saved under the Last Backup folder.
-
Page 41: Odd Backup Mode
CD/DVD/Blu-Ray on to LG Network Storage with a simple click of a button. ① Insert the optic disk to be backed up in the LG Network Storage BD/DVD drive. ② Once the system reads the optic disk, the optic disk type will appear in the front of the LCD. - Page 42 ⑧ Once back-up is completed, the following message will pop up: [Data Copy] This is a function to back up the content of the disk on to LG Network Storage just as it was originally in the disk. Selecting the Data Copy function will back up user’s data in subfolders created by back-up date under service/back-up/disc-data folders.
- Page 43 . LCD panel and front button usage [Image Copy] This backs up contents in the disk in iso image file formats. Once back-up is complete, user’s data is saved in subfolders created by back-up date under service/back-up/disc-image folders. If back-up takes place more than once on one day, a serial number will follow the date.
-
Page 44: Hibernation Mode
. LCD panel and front button usage Hibernation Mode Hibernation Mode shuts down all services of NAS and minimizes the energy used in the overall system including the HDD to run NAS in maximum energy save mode. In the maximum energy save mode, all of the above icons will disappear. To change from the Hibernation Mode to normal mode, press any one of the keys except the Power button. -
Page 45: Tray Open / Close (Disc Open Button)
. LCD panel and front button usage Tray open / close (DISC OPEN button) Pressing the “DISC OPEN” button in the bottom front will open the tray on which the disc can be placed. Pressing the “DISC OPEN” button or softly pushing the tray when the tray is open will close the tray. -
Page 46: Lg Network Storage Web Menu Use (For Lg Network Storage Administrators)
System Settings Network In the Network setting menu, an important set-up needs to be made to connect the LG Network Storage to the network. If the set up is not performed correctly, connection problems will arise at later stages, hence care must be taken. -
Page 47: Host
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Host ① Designate an LG Network Storage host name. The server name has a limit of 12 characters, this can be a combination of letters, digits, underscores and hyphens; the first characters though must be a letter or a number. - Page 48 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ∙ IP address: Enter desired IP address. ∙ Subnet Mask: Enter the subnet mask that suits the current network environment. ∙ Default Gateway: Define the outgoing route. If no gateway exists on the network, enter the IP address.
- Page 49 * Ethernet Frame Size: If the Ethernet frame size is at least 1500 gigabits, specified files can be sent quickly and with ease. In this case, the LG Network Storage alone does not change, but so do the PC and home router/router/hub/switch...
-
Page 50: Workgroup/Domain
Set up a workgroup and domains that the Windows network supports. This will allow for access to the LG Network Storage shared folder in Windows. In addition to this, the LG Network Storage domain service supports a Windows Active Directory, enabling the import of existing user information, with ease and speed. -
Page 51: Remote Access
Remote Access DDNS (Dynamic DNS) Using DDNS and connecting the LG Network Storage externally by domain name is possible. (Example: http://myname.lgnas.com or ftp://myname.lgnas.com). To record and connect the server IP address to the in the case of using a fixed IP is possible, though the DDNS allows for a convenient connection in a dynamic IP environment, where IP changes in time. - Page 52 Network Storage from the outside using a DDNS usually requires a special set-up for the router to forward network requests received by the router to the LG Network Storage, and the UPnP port forwarding function allows the router to forward data without a separate router set-up.
-
Page 53: Date & Time
① To manually set the date and time, click on the ‘Edit’ button. Use ‘standard time zone’ to designate the current local region for LG Network Storage. The standard time zone set-up may affect the NTP and domain user certification, so exact values must be entered. -
Page 54: Ntp Set-Up
NTP. To use the Default Time Server, refer to pool.ntp.org server time. Mail Notification To use Mail Notification, the LG Network Storage usage amount can be periodically checked. Registration information and results will be sent to users subsequent to their new registration. - Page 55 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ② To use it check ‘Disable’ if ‘Enable’ is not used. If ‘Enable’ is checked, proceed with the following steps: ③ SMTP Server Address: Input the Mail Server address. Refer to the information page in the network administrator Mail Service, and input the accurate SMTP Server Address value.
-
Page 56: Volume Set-Up
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Volume Set-up In order for data to be saved on to LG Network Storage, volume must be set up. If the volume is configured the hard disk icon will appear on the far right side of the LCD in... - Page 57 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ② On the top are the current volume array and a detailed description. If the volume has not yet been configured, there will not be any detailed description.
-
Page 58: Add Disk
① Press the End button in the web, system → power → end. ② Insert the second disk in the LG Network Storage and turn the power on. To add new hard disks, refer to Chapter 2 LG Network Storage Installation. -
Page 59: Remove Disk
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Remove disk Forced removal of the hard disk without following the remove disk functions provided in this screen may cause future complications with system performance and loss of user’s important data. -
Page 60: Trahsbox
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Trahsbox Removing a file or folder when the network drive is still connected creates a trashbox and all deleted files are temporarily moved here. If user were to recover the deleted data, user may find the file or folder from the trashbox and move them to the intended location. -
Page 61: Selective Mirror (Selective Data Protection For Folders)
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Selective Mirror (Selective data protection for folders) The Selective Mirror function automatically generates copies of certain folders, which allows data recovery even after the loss of source data. -
Page 62: Edit Selective Mirror List
② Press the “delete” button to confirm the deleted set-up. Use Selective Mirror If SMB (Samba) and FTB is used to store data in the LG Network Storage and a change incurs in the source folder, the same change will apply to the destination folder and the source folder will be double protected. -
Page 63: Conditions
④ A subfolder of a source folder cannot be designated a destination folder. ⑤ A folder designated as a destination folder cannot be designated as a source folder in another setting. Power Settings related to power for the LG Network Storage can be adjusted (Hibernation, UPS and System Shutdown). -
Page 64: Hibernation Setup
When selecting ‘Enable’, proceed to the next step. ③ Set stand-by time. ④ If there is no data traffic during the given time, the LG Network Storage will enter hibernation mode. Time can be set to 10/30/60/120 minutes. ⑤ Click on the ‘Apply’ button to dictate changes to the LG Network Storage. Click on... -
Page 65: Ups Power Setting
③ ④ ③ Decide whether to shut down LG Network Storage after designated time interval or when UPS power becomes low in case of unexpected external power cut. * When setting it to shut down depending on remaining power of LG Network... -
Page 66: Hibernation Mode On/Off
‘Cancel’ button to discard changes. Hibernation Mode On/Off LG Network Storage can cut off the HDD power for a designated time the user does not make use of the program, running LG Network Storage with minimum energy. Any time interval during the day may be set up for the max energy save mode. - Page 67 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ Once it reaches the beginning time set up, the system automatically transitions into max energy save mode and on the LCD will appear a message, “Now Working. . .”...
- Page 68 . LG Network Storage Web Menu Use (for LG Network Storage administrators) Shutdown Do not go directly to the LG Network Storage, as LG Network Storage can be turned on and shut down via the web. ① Restart - Ends all current operations and restarts the LG Network Storage.
- Page 69 . LG Network Storage Web Menu Use (for LG Network Storage administrators) Activating the System Remotely Once LG Network Storage has entered its max energy save mode, it can be activated through remote internet access. The screen accessible through the internet is slightly different from the log –in screen in the normal mode, and only the administrator can use...
-
Page 70: Language Setting
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Language Setting The web menu indicates a language selection capability. ① Click on the ‘Edit’ button to set language. ② Select a desired language out of Korean, English, French, Spanish, and German and click on the ‘Apply’... -
Page 71: Firmware
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Firmware LG Network Storage firmware settings can be changed (Upgrade, Initialization, Configuration and Backup/Restore). Upgrade LG Network Storage system and Blu-ray/DVD Driver firmware can be downloaded from the product web site, and can be used for upgrading. - Page 72 . LG Network Storage Web Menu Use (for LG Network Storage administrators) [System Firmware Upgrade] ① Verify connection to the Internet and download system firmware for the LG Network Storage from the product site linked below. ☞ http://www.lge.com ② Press the “find” button to select the system firmware downloaded from the product site.
-
Page 73: Initialization
④ When upgrade is finished, the version of installed Blu-ray/DVD drive firmware will be indicated * For stability of data, a backup of the LG Network Storage is strongly recommended before upgrading. Installation takes between 1 to several minutes. Advance access of other client users to the LG Network Storage while upgrading firmware is forbidden. -
Page 74: Configuration Back-Up
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Configuration Back-up This allows the back-up/recovery of settings for LG Network Storage at a certain time. Network settings (host name, IP address, workgroup), time setting (date/time, NTP), mail notification service setting, share administration (user, group, folder security), service setting values may be backed up but user data requires separate back-up. - Page 75 . LG Network Storage Web Menu Use (for LG Network Storage administrators) [Save Settings to PC and Restore] During initialization of NAS, configuration files can be saved to PC for later restoration. [Save Configuration Files to PC ] Choose configuration files to be saved to PC and click on the ‘Save’ button to save them to PC.
-
Page 76: Lg Network Storage Share Management
. LG Network Storage Web Menu Use (for LG Network Storage administrators) LG Network Storage Share Management This function allows you to create users and groups as well as folders, and hence change settings for their access authorization. User Current registered users appear, so new users can be created and registered user information can be modified or deleted. - Page 77 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter user password. ④ Enter user password again for confirmation. ⑤ Enter user’s name. ⑥ User description can be added. ⑦ Enter user e-mail As long as mail server settings are correct, the registration result will be sent to he entered e-mail address.
-
Page 78: Group
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Group Current registered groups are displayed. Groups can be created and deleted, as well as the addition or removal of users in registered groups. [Creating a New Group] ①... - Page 79 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter group description. ④ Select user to be added to the group by clicking on the corresponding checkbox. To remove a user from the group, deselect the user by clicking on the the checkbox again.
-
Page 80: Folder
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Folder Current registered folders are displayed. A folder can be created/changed/deleted for file sharing and/or authorization settings access changed to the created folder. [Create New Folder] ① Click on the ‘Add Folder’ button. - Page 81 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Enter folder description. ④ Set the volume where the folder will be created if there is more than one. ⑤ Decide whether to permit folder sharing through SMB, AFP, FTP or Webday protocol.
-
Page 82: Blu-Ray / Dvd
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Blu-ray / DVD The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient. - Page 83 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ① Move the intended folder or file to the destined location. ② Selecting a folder or file to record and move to the right side produces a configuration data list.
- Page 84 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ④ Click on the button and confirm that disc writing is possible as indicated in the disc status box. ⑤ Pressing the button begins the burning process. The burning process is accompanied by a progress bar display.
- Page 85 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑥ At the end of the burning process, the tray ejects and the disc can be removed.
-
Page 86: Service
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Service DLNA(Digital Living Network Alliance) DLNA, which stands for Digital Living Network Alliance, allows sharing multimedia data such as music, video, or images saved in other devices through connecting digital devices such PC, hard disks, or digital TVs through the home network. - Page 87 ④ To activate, please press the “apply” button. To deactivate, please select “Do not apply” and press the “apply” button. [Save Multimedia data in source path] Multimedia data in LG Network Storage may be read, written and shared through the network. ① Run Internet Explorer.
- Page 88 ∙ The DLNA server icon will only appear if (Set-up) > (Network set-up) > [Media Server Connection] has been activated. ∙ Displayed folder name may vary depending on the DLNA server. LG-NAS is the default value. ∙ Certain files may not play or may have limited access during play depending on the user’s device.
- Page 89 ② Perform a default set-up and driver set-up following the Digital Image Frame user manual. ③ Search the LG Network Storage in the network using the Digital Image Frame’s Explore function. ④ Set up to connect LG Network Storage in Digital Image Frame.
-
Page 90: Network Server
For detailed instructions, refer to the relevant device user manual. Network Server Access to the LG Network Storage through FTP/FTPs or AFP is configured with this function. * For router use, the router settings need to be changed. Please refer to port forwarding of DMZ settings in the router’s manual. - Page 91 . LG Network Storage Web Menu Use (for LG Network Storage administrators) * Using the DDNS service offered by LG Network Storage will log on to ftp:// myname.lgnas.com:port number. For more details, please refer to system remote control <DDNS>. * To use the default port value 21, user may log on without inputting the port number through ftp://IP address or ftp://myname.lgnas.com.
-
Page 92: Afp
. LG Network Storage Web Menu Use (for LG Network Storage administrators) * LG Network Storage supports FTPS with advanced security on the existing FTP for better protection of the user’s data traveling through the internet. To use FTPS, an FTP connection program that supports FTPS must be used. -
Page 93: Network Printer
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Network Printer The network printer can be used by connecting the USB printer to the LG Network Storage. ① Select Service > Network Printer from the administrator’s web menu. - Page 94 . LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac users] ① Click on Go/ Utilities in the tool menu. ② Click on the Printer Setup Utility.
- Page 95 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Click on Add. ④ Hold the alt key down while clicking on More Printers.
- Page 96 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ In the pop up window: i. Select Advanced. ii. Select Windows Printer via SAMBA.
-
Page 97: Itunes
. LG Network Storage Web Menu Use (for LG Network Storage administrators) iii. Input the printer URI. The form name is smb: /LG Network Storage IP/printer. The printer name can be found in the Device Configuration(device config)/ USB Printer page. - Page 98 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ① For required use, select ‘Enable’ for iTunes Streaming Service. ② Set Music Library Update Frequency. - Forced update (manual): Activate once the music file service for Streaming to begin the service.
-
Page 99: Time Machine
Time Machine The Time Machine service is the automatic back-up function built in Mac OS X and allows the Mac data copies to be stored in LG Network Storage in their latest version. ♣ This service is available in only Mac OS X version 10.5 Leopard or later versions. - Page 100 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ② Enter the MAC address. The Mac address can be found by going to “Application Programs” → “Utilities” → “Terminal” and running the “ifconfic” command. Enter the “ether” address under en0.
-
Page 101: [Mac Os]
. LG Network Storage Web Menu Use (for LG Network Storage administrators) [Mac OS] ① Go to “Move” → “Connect to Server” and enter “afp://LG Network Storage IP address” under “Server Address”, then click “Connect”. * The AFP function must already be activated under network server settings. - Page 102 ③ When the mount volume window opens, select “Timemachine” and press the “OK” button. ④ Go to “Settings” → “Time Machine”, press “Change disk…”, select LG Network Storage “Timemachine” and press “Enable as back-up”. ⑤ When the log-in window appears again, repeat instruction (2) and the Time...
-
Page 103: Iscsi
. LG Network Storage Web Menu Use (for LG Network Storage administrators) iSCSI This allows for the user to use the LG Network Storage Blue-ray/DVD drive as a CD drive. The LG Network Storage iSCSI service allows multiple users’ log-in and usage. -
Page 104: [Server Synchronization]
. LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Initiator Installation on a Mac Install the globalsan iSCSI initiator. This can be downloaded from the “studio network solutions” homepage. ☞ Website http://www.studionetworksolutions.com [Server Synchronization] On the webpage, click “Enable” and then click “Apply”. Once the iSCSI is activated, certain functions such as web burning will be limited. - Page 105 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ② Find the iSCSI target (LG-NAS). Click on the Discover tap on the top of the iSCSI Initiator program. Then click the “Add” button on the bottom. Then a new window to Add Target Portal (picture below) should appear.
- Page 106 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Log in. Go to the Targets tab on the cop of the iSCSI Initiator program. If all of the above procedures have been followed properly, the iSCSI Initiator will find and list the information for the target (LG-NAS).
- Page 107 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑥ Log out when done. Go to the Targets tab on the top of the iSCSI Initiator program. Then click on the Details button on the bottom. Select the relevant Target Name and click “Log Off. . . “...
- Page 108 B. Connection on a Linux PC ① Activate the iSCSI initiator. $ /etc/init.d/open-iscsi start ② Find the iSCSI target. If the LG NAS (target)’s IP address is 192.168.10.2, the target is: $ iscsiadm -m discovery -t sendtargets -p 192.168.10.2 Once target is found, execute the above command, which will display the target name.
- Page 109 [Connection for CHAP certification] ① Open the open-iscsi set-up file “/etc/iscsi/iscsid.conf”and set up the CHAP certification. Follow the below instructions. (The CHAP certificate password must match the password set up for the iSCSI service on the LG Network Storage webpage.) discovery.sendtargets.auth.authmethod = CHAP discovery.sendtargets.auth.username = inAdmin...
- Page 110 . LG Network Storage Web Menu Use (for LG Network Storage administrators) C. Connection on a Mac ① Activate iSCSI initiator. Go to System Preferences -> globalSAN iSCSIㄴ ② Find the iSCSI target. If the IP address is 192.168.10.2, see below.
- Page 111 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ Log in. Go to globalSAN iSCSI -> Targets, select the relevant target name and click “Log On..” and then “Connect” on the pop-up window.
- Page 112 Blue-ray drive, it is recommended to avoid commands that may interfere with the work, such as “open tray”. In addition, if data writing/reading on the LG Network Storage is in progress through the network drive connection, there may be substantial data transfers within the network and cause difficulty in data transfers through the iSCSI, resulting in slower and limited writing/reading speed per disk.
-
Page 113: Torrent
. LG Network Storage Web Menu Use (for LG Network Storage administrators) Torrent A P2P file sharing program that allows simultaneous download of files from multiple locations, Torrent does not have its own search engine, so user must obtain a file in format .torrent, register to the torrent program and download the file. -
Page 114: [Set-Up]
. LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑧ Filter: Hides or unhides the filter item. ⑨ Inspector: Hides or unhides the information for the selected file. [Set-up] ① Click on the set-up icon. ② Select Preferences and set up the port to be used, transfer speed limit, etc. -
Page 115: Usb Sync
① Connect a USB or memory device to the LG Network Storage. * On the back panel of the LG Network Storage there are 2 USB ports, on the front panel of the LG Network Storage there is 1 USB port and 1 memory slot. - Page 116 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑤ The task name is saved. (automatically generated) ⑥ The task information description is specified. ⑦ The selected device’s unique ID is displayed. ID specific to the manufacturer information, product information, etc, are displayed.
- Page 117 . LG Network Storage Web Menu Use (for LG Network Storage administrators) <USB Sync Setting> The current task list is indicated and tasks may be created, edited, deleted or synched. ① Clicking on the ‘Create’ button allows for a new task to be created.
- Page 118 . LG Network Storage Web Menu Use (for LG Network Storage administrators) The Incremental back-up will create a folder for the back-up date with the above files. It also creates a Last Backup folder containing all of the files in the USB. The...
- Page 119 . LG Network Storage Web Menu Use (for LG Network Storage administrators) For the 3rd back0up (Jan 3, 2009), e.txt has been opened, modified and saved. Only e.txt file will be saved in the new folder. In the Last Backup folder, all files in the current USB, c.txt, d.txt and e.txt, will be saved as is.
-
Page 120: Information
Status Status of the LG Network Storage Network, Volume and external devices can be viewed. For more specific details or to make changes, clicking on the icons on the bottom will direct the users to the relevant webpage. - Page 121 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ All hard disk information connected to the LG Network Storage can be viewed by Bay position ④ The information pertaining to the Blu-ray drive connected to the LG Network Storage can be viewed.
-
Page 122: Log
. LG Network Storage Web Menu Use (for LG Network Storage administrators) The LG Network Storage service history can be displayed/saved. ① ② ③ ④ ⑤ ① The system use history can be viewed. ② The share folder use history can be viewed. - Page 123 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ The FTP use history can be viewed. ④ The diagnosis is und and the result can be viewed - The service code for proper functions is displayed as [SVC_ CODE: 00_00].
-
Page 124: Top Menu
WebDAV LG Network Storage supports the WebDAV function which allows to remotely drag and drop, open and save functions after logging on to LG Network Storage from the web. (“MS Office file” only) * The WebDAV function will allow the user logged in through the webpage to access files in the LG Network Storage as if they were files in the user’s PC. - Page 125 . LG Network Storage Web Menu Use (for LG Network Storage administrators) <Open> ① Select the WebDAV icon on the top. ② Go through user certification. This is the same as the user certification required for network folder access. ③ Once certified, the following screen will pop up and file drag and drop, open, edit and save functions will be made possible.
-
Page 126: File Viewer
. LG Network Storage Web Menu Use (for LG Network Storage administrators) File Viewer User can log on to LG Network Storage through the internet and remotely search for, open or save files saved in LG Network Storage or upload files to the LG Network Storage. <Open>... - Page 127 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ③ A new web browser will open as follows. Folders will appear in the same form as when the network folder is accessed. ④ Selecting the folder will display the contents of the folder.
- Page 128 . LG Network Storage Web Menu Use (for LG Network Storage administrators) ⑤ Clicking on the file will ask whether user would like to open or save the file. ⑥ The upload function will allow the user to upload files from the PC to the LG Network Storage.
-
Page 129: My Information
. LG Network Storage Web Menu Use (for LG Network Storage administrators) My Information ① Click the “My information” button on the left top corner. This displays the user information. ② Click on the “Edit” button on the right bottom corner. -
Page 130: Lg Network Storage Web Menu Usage (Regular Users)
. LG Network Storage web menu usage (Regular users) Blu-ray / DVD The built-in Blu-ray/DVD drive allows direct copy of data from discs to LG Network Storage. Furthermore, secondary backup of data using the Blu-ray drive makes data management safer and more efficient. - Page 131 . LG Network Storage web menu usage (Regular users) ① Move the intended folder or file to the destined location. ② Selecting a folder or file to record and move to the right side produces a configuration data list. ③ Specify disc name in the ‘‘Disc Name’ window...
- Page 132 . LG Network Storage web menu usage (Regular users) ④ Click on the button and confirm that disc writing is possible as indicated in the disc status box. ⑤ Pressing the button begins the burning process. The burning process is accompanied by a progress bar display. To cancel the process, click on the...
- Page 133 . LG Network Storage web menu usage (Regular users) ⑥ At the end of the burning process, the tray ejects and the disc can be removed.
-
Page 134: Top Menu
Top menu File Viewer User can log on to LG Network Storage through the internet and remotely search for, open or save files saved in LG Network Storage or upload files to the LG Network Storage. <Open> ① Click NAS Explorer on the top. - Page 135 . LG Network Storage web menu usage (Regular users) ③ A new web browser will open as follows. Folders will appear in the same form as when the network folder is accessed. ④ Selecting the folder will display the contents of the folder.
- Page 136 . LG Network Storage web menu usage (Regular users) ⑤ Clicking on the file will ask whether user would like to open or save the file. ⑥ The upload function will allow the user to upload files from the PC to the LG Network Storage.
- Page 137 . LG Network Storage web menu usage (Regular users) My Information ① Click the “My information” button on the left top corner. This displays the user information. ② Click on the “Edit” button on the right bottom corner. ③ Enter the modified information, enter the existing password in “User password”...
-
Page 138: Lg Network Storage Via Network Drive
. LG Network Storage via network drive The file sharing service is the most important function in LG Network Storage. This section pertains to Windows, Mac, Linux OS, which are explained in reference to their use with the LG Network Storage network drive. - Page 139 Windows OS “Execute” function use Clicking on “Execute” in the Windows OS can start a new menu with inputting the \\IP Address to the LG Network Storage can be accessed. If IP address is unknown, refer to <Use Application Program>...
- Page 140 . LG Network Storage via network drive Tip) Post server connection, network drive set-up If there is a connection to the LG Network Storage, all sharing folders are registered. If settings involve the network drive using the “Tools > Map Network Drive…”, future connection to the LG Network Storage server...
- Page 141 . LG Network Storage via network drive * Multiple folders can be set up in different network drives in the same way.
-
Page 142: Mac Os Connection
[“Server connect” function use] The LG Network Storage sharing folder can be added to the Mac server list on the desk top. The connection order is as follows. ① Select “Connect to server” after clicking on “Go” at menu bar. - Page 143 . LG Network Storage via network drive ③ Input the log in ID and password and click on the ‘OK’ button. The initial settings are as follows: ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page.
- Page 144 . LG Network Storage via network drive ④ Select the volume to be used (e.g. cdrom/service/volume1) in the LG Network Storage folder list and click “OK”. ⑤ The relevant shared folder will open and the contents displayed.
-
Page 145: Linux Os Access
. LG Network Storage via network drive Linux OS access LG Network Storage supports Windows, MAC, and Linux OS, through the NFS service. The Linux system connection is as follows. Ubuntu will be used as a reference. ① Click on the menu bar and then select ‘network’. - Page 146 ③ Selecting LG Network Storage will display the folder list of LG Network Storage. Select the volume to be used (e.g. cdrom/service/volume1). ④ If the ID and passwords are inputted then connection to the LG Network Storage is allowed. Initial default information is ID: admin, password: admin. For future security, it is recommended that password is changed after logging on to the web administrator page.
- Page 147 . LG Network Storage via network drive ⑤ After logging in, the LG Network Storage share folder appears.
-
Page 148: Lg Network Storage Maintenance
LG Network Storage shut down/restart The following steps pertain to server shut down/restart. ① Inform all connected users to save files in operation and stop use of the LG Network Storage. ② Open the administrator web page, and go to the ‘System > Power > Shutdown’ tab. -
Page 149: Administrator Password And Network Set Up Initialization
③ Network set up/TCP/IP configuration : Jumbo frame inactivity ④ System device/IP filter: All connections are allowed ⑤ RAID components ⑥ Service set-up value ⑦ User/folder/group list ∙ Log in to the LG Network Storage using the default user name and password: ID: admin, password: admin... -
Page 150: System Information Checking And Saving
‘System Log’, ‘Samba Log’ and ‘FTP Log’. Self-diagnosis execution The LG Network Storage, by virtue of built in self-diagnosis mode, helps users easily recognize and handle problems arising on the server. * The volume must first be constructed before running self-diagnosis. -
Page 151: System Failure Or Malfunction
‘[SVC_CODE xx_yy] and make a record on tasks done before the accident and messages you witnessed. ② For error messages mentioned in ①, you can get help from LG electronics Service Site if such errors were caused by negligence. http://www.lge.com. -
Page 152: Raid Trouble Shooting
The LG Network Storage RAID configuration is abnormal when error messages appear, hence resort to another solution: Note: To avoid data obstacles, first perform a back-up of all important data from the LG Network Storage. 1. RAID configuration error checkup ∙... - Page 153 1. In the LG Network Storage, one HDD can be connected or disconnected at a time. 2. 10 seconds will lapse before 2 tones are heard when the LG Network Storage is connected to or disconnected from a new hard drive.
-
Page 154: Appendix A Volume Construction & Raid Configuration
. RAID trouble shooting Appendix A Volume Construction & RAID Configuration This section describes volume configuration and supported RAID level. When configuring volume using RAID, the use of Disks of the same manufacturer and capacity is recommended to maximize stability and efficiency of configuration. In the case that the Disks differ in capacity and trademark, data may be lost due to low system stability and efficiency. - Page 155 . RAID trouble shooting ∙ Mirroring volumes Data can be exactly replicated to the Disk through this technique. If one Disk becomes damaged in the volume, data can be efficiently transferred, saved and backed up to another configured Disk. The volume’s storage capacity is equal to that of the smallest Disk in the RAID1, as the data is reproduced from Disk to Disk.
- Page 156 . RAID trouble shooting ∙ RAID0 striping volume The Disks are configured in parallel so that they are all being used at once to store data, as if they were one Disk in summation. Because the data is saved to each Disk in parallel, many files of low capacity are read simultaneously but with superior efficiency.
- Page 157 . RAID trouble shooting ∙ JBOD Linear volume The Disks are configured in series so that they are all being used at once to store data, as if they were one Disk in summation. The volume’s storage capacity can be maximized, as the data is stored to the Disks in sequence.
-
Page 158: Appendix B Technical Support
. RAID trouble shooting Appendix B Technical Support LG Network Storage provides dedicated online support and customer service via instant messenger. You can contact us by the following means: -. Online Support : http://www.lgservice.com LG Electronics U.S.A. Inc, 1000 Sylvan Ave. -
Page 159: Appendix C Open Source Software Notice
. RAID trouble shooting Appendix C Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL/LGPL License Agreements: GPLv2.0 : ∙ apcupsd ∙ ∙ base-files ∙ base-passwd ∙ bash ∙ bootchart ∙... - Page 160 . RAID trouble shooting ∙ lockfile-progs ∙ logrotate ∙ lprng ∙ ∙ ∙ module-init-tools ∙ ∙ mt-daapd ∙ netatalk ∙ netbase ∙ net-tools ∙ noflushd ∙ ntfs-3g ∙ ∙ perl ∙ proftpd ∙ psmisc ∙ readline ∙ scst-iscsi ∙ ∙ sg3-utils ∙...
- Page 161 . RAID trouble shooting GPLv.0 : ∙ binutils ∙ gnupg ∙ parted ∙ rsync ∙ samba ∙ wget LGPLv2.1 : ∙ ∙ attr ∙ avahi ∙ confuse ∙ debmapper ∙ dialog ∙ glib2.0 ∙ glibc ∙ ∙ gnutls8 ∙ keyutils ∙...
- Page 162 . RAID trouble shooting LG Electronics offers to provide source code to you on CD-ROM for a charge covering the cost of performing such distribution, such as the cost of media, shipping and handling upon e-mail request to LG Electronics at: opensource@lge.com...
- Page 163 . RAID trouble shooting This product includes other open source software. ∙ bind9 : Copyright © 2004-2008 Internet Systems Consortium, Inc. (“ISC”) Copyright © 1996-2003 Internet Software Consortium. Copyright © 1996-2001 Nominum, Inc. ∙ cyrus-sasl2: Copyright © 1998-2003 Carnegie Mellon University ∙...
- Page 164 . RAID trouble shooting ∙ Prototype JavaScript framework: Copyright © 2005-2008 Sam Stephenson ∙ sudo: Copyright © 1994-1996,1998-2005,2007 Todd C. Miller <Todd.Miller@courtesan.com> Copyright © 1987, 1989, 1990, 1991, 1993, 1994 The Regents of the University of California ∙ tcp-wrappers: Copyright © 1995 by Wietse Venema ∙...
-
Page 165: Appendix D Compatible/Recommended Device List
For the latest compatible/recommended device list, please visit http://www.lge.com. Recommendation hard disk list The following is a list of hard disks possibly compatible with the LG Network Storage. The following hard disks are recommended. In the case of using hard disks not recommended by LG Electronics, malfunctions in the LG Network Storage can occur. - Page 166 This device strictly complies by the rules and regulations of 이 기기는 가정용(B급)으로 전자파 적합등록을 한 기기로서 주로 가정에서 MIC, governing emission of electromagnetic waves (B grade), 사용하는 것을 목적으로 하며, 모든 지역에서 사용할 수 있습니다. and can be used in any area in the household.