Table of Contents
Advertisement
Removing and replacing the air baffle
Complete the following steps to remove the air baffle.
Note:
1. Turn off the server and peripheral devices.
2. Disconnect the power cord; then, disconnect all external cables from the server.
3. Remove the server cover.
4. Grasp the air baffle on each side and squeeze gently; then, pull the baffle up
5. When the baffle is free of the back of the chassis, lift it out of the server.
To install the air baffle, reverse the previous steps.
62
xSeries 305 Type 8673: Hardware Maintenance Manual and Troubleshooting Guide
v Read "Handling static-sensitive devices" on page 29.
v Read "Safety information" on page 87.
and away from the back of the chassis.
Air baffle
Advertisement
Table of Contents
