Using Cli Variables - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual
Cli software configuration guide
Hide thumbs
Also See for AP775A - Nexus Converged Network Switch 5010:
- Configuration manual (1486 pages) ,
- Reference (886 pages) ,
- Command reference manual (792 pages)
Table of Contents
Advertisement
Using Keyboard Shortcuts
Command
Ctrl-G
Ctrl-Z
Ctrl-L
The following table describes the commonly used configuration submodes.
Table 5: Common Configuration Submodes
Submode Name
Call home
FCS Registration
Fibre Channel alias
FSPF
Interface configuration
Line console
Virtual terminal line
Role
VLAN
VSAN database
Zone
Zone set
Using CLI Variables
The Cisco Nexus 5000 Series CLI parser supports the definition and use of variables in CLI commands. CLI
variables can be used as follows:
• Entered directly on the command line.
• Passed to the child script initiated using the run-script command.
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
24
Description
Exit
End
Clear session
From Configuration Mode, Enter:
callhome
fcs register
From FCS registration submode:
platform name name vsan vsan-id
fcalias name name vsan vsan-id
fspf config vsan vsan-id
interface type slot/port
line console
line vty
role name
vlan
vsan database
zone name string vsan vsan-id
zoneset name name vsan vsan-id
Using CLI Variables
Submode Prompt
switch(config-callhome)#
switch(config-fcs-register)#
switch(config-fcs-register-attrib)#
switch(congif-fcalias)#
switch(config-(fspf-config))#
switch(config-if)#
switch(config-console)
switch(config-line)#
switch(config-role)#
switch(config-vlan)#
switch(config-vsan-db)#
switch(config-zone)#
switch(config-zoneset)#
OL-16597-01
Advertisement
Chapters
Table of Contents
Troubleshooting
