Page 1
user manual manual de instrucciones Iron Aid EDI 96150...
Page 2
We were thinking of you when we made this product...
Page 3
Thank you for choosing a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. The Electrolux ambition is to offer a wide variety of quality products that make your life more comfortable.
4 electrolux Contents Safety Installation safety instructions Disposal Removing transport safety Environmental tips equipment Appliance description Special accessories Control panel Guarantee/Customer Service Prior to using for the first time Service Sorting and preparing laundry Starting up for the first time...
5 Important: Only operate the Iron Aid programmes with distilled water! Mains water causes damage to the appliance. Safety Before first starting up rubber pads should not be dried in the appliance. • Note the ”Installation and con- nection instructions”...
Page 6
6 electrolux safety • Only fill the water reservoir with dis- the fuse box and/or fully unscrew the tilled water. Do not use tap water or screwed-in fuse. any additives! The condensed water • Disconnect the machine from the from this appliance’s condensed wa-...
7 Disposal Packaging material Warning! Remove mains plug from socket when you have no further The packaging materials are envi- use for the machine. Cut off mains ronmentally friendly and can be re- cable and dispose of together with cycled.
8 electrolux environmental tips Environmental tips • During the drying process, laundry becomes fluffy and soft. Fabric sof- teners are not therefore needed when washing. • Condensed water can be used for iron aid programmes after beeing fil- tered. • Your appliance will function most economically if you: –...
9 Appliance description Filler neck for water tank Control panel Drawer with condensed water Fine strainer container (lint filter) Steam nozzle Lamp for inside light Micro-fine filter Large mesh filter (lint filter) (lint filter) Type plate Button for opening...
10 electrolux control panel Control panel Maintenance displays - HEAT EXCHANGER DELAY - CLEAN FILTER TIMER Programme knob and - CONTAINER button On/Off switch Display Function buttons START/PAUSE-button What is shown in the display Iron Aid Start time programme preselection...
Page 11
11 Function overview: Iron Aid Steam System This appliance can be used both as a odours from dry outerwear. Garments dryer and to condition clothes (Iron Aid) are softened and smoothed and require to treat garments using steam.
12 electrolux prior to using for the first time Prior to using for the first time IIn order to remove any residues which 1. Turn the programme knob to may have been produced during pro- TIME (TIEMPO). duction, wipe the dryer drum with a 2.
13 Special notes about Iron Aid items. Colours may fade (check col- our fastness of fabric when damp in an inconspicuous area). • The following textiles cannot be treated using an Iron Aid pro- gramme: •...
14 electrolux iron aid - steam-system Iron Aid - Steam-System Fill water tank You must fill up the water tank before using an Iron Aid programme for the first time. Use the distilled water provided if there is not yet any condensed water from previous drying programmes (see chapter on ‘Cleaning and Maintenance,...
Page 15
- steam-system electrolux 15 2. Fill with distilled water from the can- ister provided, up to the MAX mark inside the container. 3. Push filler neck and drawer with con- densed water container back in. When dry, all textiles not specifically prohibited in the chapter ‘Sorting...
18 electrolux overview of iron aidtm programmes Selecting the programme Use the programme selector to set the programme you require. The estimated programme duration without drying cy- cle (in minutes) appears in the display. Select steam level (LOAD - CAR-...
19 Important: If in doubt, always select a lower steam level first until you have more experience with load vol- umes, fabric types and the corre- sponding optimum steam level. If too high a steam level is selected, garments may lose their shape.
Page 20
20 electrolux overview of iron aidtm programmes Delay timer Child safety device The child lock can be set to prevent a programme being accidentally started or a programme in operation being acci- dentally changed. With the DELAY (INICIO DIFERIDO) The child safety device locks all buttons button, you can delay the start of a and the programme knob.
21 Starting an Iron Aid pro- gramme It is normal for the appliance to make noises during an Iron Aid or drying pro- Press the START/PAUSE (INICIO/PAU- gramme if garments with hard parts, SA) button. The programme is started.
22 electrolux starting an iron aidtm programme Iron Aid programme complete / 1. Open the loading door to remove the laundry. removing laundry 2. Before removing the laundry, remove After the Iron Aid phase has ended, 0. 0 0 fluff from the micro-fine filter. It is best is illuminated and the message to use a damp hand for this purpose.
23 Drying Overview of drying programmes Additional- functions Care Programmes Application/properties sym- bols Thorough drying of thick or multi- EXTRA • • • layered fabrics, e.g. terry towelling (EXTRASECO) items, bathrobes. Thorough drying of fabrics of even CUPBOARD •...
24 electrolux overview of drying programmes Selecting the programme Use the programme selector to set the programme you require. The probable programme run time is displayed (in minutes) on the multi- display. Selecting additional functions You can choose from the additional...
25 Caution: Make sure that by select- ing the DRYNESS (GRADO DE SEC.) function, you do not over-dry your wool or silk. DELICATE (DELICADO) For especially gentle drying of sensitive fabrics with the l care label and for temperature-sensitive textiles (e.g.
26 electrolux overview of drying programmes TIME (TIEMPO) To select the programme duration after setting the TIME (TIEMPO) pro- gramme. You can select a programme duration from 10 mins to 3 hrs in 10- minute steps. 1. Turn the programme knob to the TIME (TIEMPO) programme.
27 Starting a drying programme 3. Close loading securely. Lock must audibly lock. 4. Press the START/PAUSE (INICIO/ Press the START/PAUSE (INICIO/PAU- PAUSA) button to continue the dry- SA) button. The programme is started. ing cycle.
28 electrolux cleaning and maintenance Cleaning and maintenance Cleaning lint filters To ensure that the appliance works per- fectly, the lint filters in the door and in front of the drum must be cleaned after every Iron Aid or drying cycle.
29 Cleaning the filter area The filter area does not have to be cleaned after every drying cycle, but should be checked regularly and cleaned of fluff, if necessary. You will need to undertake the following (to clean the filter area: 1.
30 electrolux cleaning and maintenance Emptying the condensed water container Empty condensed water container after every drying cycle. If the condensate tank is full, an active programme will break off automatically and the CONTAINER display will light up. In order to continue the programme, the condensed water container must first be emptied.
31 4. The condensed water be used as distilled water, e.g. for steam irons. However, first filter the condensed water to remove any residues and small pieces of fluff. Using the attached canister to filter: Pour the water out of the container straight through the filter at the top of the canister.
32 electrolux cleaning and maintenance 2. Fill with distilled water from the can- ister provided, up to the MAX mark inside the container. 3. Push filler neck and drawer with con- densed water container back in. The water tank has a volume of ap- prox.
33 Emptying the water tank for long periods of disuse If Iron Aid programmes are not run for more than three weeks, the tank should be emptied and refilled with fresh dis- tilled water if required.
34 electrolux cleaning and maintenance Cleaning heat exchanger If the HEAT EXCHANGER display is illu- minated, the heat exchanger needs to be cleaned. Caution! Operating when the heat exchanger is clogged with lint can damage the appliance. This also in- creases energy consumption.
35 Cleaning the drum Caution! Do not use sharp objects to clean the heat exchanger. You Important Do not use scourers or could damage it an cause leaks. steel wool to clean the drum. 7. Clean heat exchanger.
36 electrolux what to do if… What to do if… Remedying small malfunctions If, during operation, the error code (E If the error appears again, please con- plus number or letter) appears on the tact the Customer Care Department, multi-display: Switch the appliance off stating the error code.
37 Problem Possible cause Remedy Select a different programme the Wrong programme selected. next time you dry (see section “Overview of programmes”). Lint filter blocked. Clean lint filter. Heat exchanger blocked with Clean heat exchanger.
38 electrolux technical data Technical data This appliance conforms with the – 89/336/EEC dated 03.05.1989 EMC following EU Directives: Directive inclusive of Amending Di- – 73/23/EEC dated 19.02.1973 Low rective 92/31/EEC Voltage Directive – 93/68/EEC dated 22.07.1993 CE Marking Directive...
39 Installation safety instructions • Important! The appliance must be • The door of the appliance must not moved in vertical position for trans- be able to be blocked by house port. doors or other appliance doors.
40 electrolux removing transport safety equipment Removing transport safety equipment Caution! Before first starting up, all parts of the transport safety equipment must be removed. 1. Open loading door 2. Pull off adhesive strips from inside machine on top of drum.
These intermediate installation kits can be used to arrange the iron aid appli- ance and an automatic Electrolux wash- ing machine (60cm wide, front loading) as a space-saving washer/iron aid stack. The automatic washing machine is at the bottom and the iron aid appli- ance is at the top.
European Guarantee Autres agences étrangères as- surant le service après-vente This appliance is guaranteed by Electrolux in each of the countries listed at the back of this Dans ces pays, les conditions de user manual, for the period specified in the appli- garantie des concessionnaires de ance guarantee or otherwise by law.
43 Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the op- erating instructions (section “What to do if…”). If you were not able to remedy the prob-...