Table of Contents
Advertisement
34
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote
Control
The Magic Remote Control operates by pairing
with your TV.
Once you purchased the TV, please register the
Magic remote control as follows;
How to register the Magic Remote Control
To register automatically, turn the TV
on and press the
registration is completed, the completion
message appears on the screen.
If registration fails, turn the TV off and
(Wheel)
back on, then press the
complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the
SMART
buttons together for 5
seconds to reset, then register it by
following "How to register the Magic
BACK
remote control" above.
2 To re-register the Magic remote control,
press and hold the
SMART
for 5 seconds toward the TV. When
registration is completed, the completion
message appears on the screen.
How to use Magic Remote
Control
1 You can move the pointer by aiming the
Pointer Receiver of the remote control
at your TV then move it left, right, up or
down.
»
If the pointer does not work properly
y
leave the remote control for 10 seconds
then use it again.
2 If the pointer disappears, move the
remote control slightly to left or right.
Then, it will automatically appear on the
screen.
»
If the pointer has not been used for a
y
certain period of time, it will disappear.
Wheel (OK). When
Wheel (OK) to
BACK and
BACK button
3
If you press
Wheel (OK) on the Magic
remote control, the screen appears.
1
Shows information about the current program
and screen.
Pressing this button will display number
2
keypad which you can select channel number.
3
You can select My Apps Menu.
Precautions to Take when
Using the Magic Remote
Control
Use the Magic remote control within the
y
y
maximum communication distance (10 m,
32.8ft). Using the remote control beyond
this distance, or with an object obstructing it,
may cause a communication failure.
A communication failure may occur due to
y
y
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
remote control.
The Magic remote control may be damaged
y
y
or may malfunction if it is dropped or
receives a heavy impact.
Take care not to bump into nearby furniture
y
y
or other people when using the Magic
remote control.
Manufacturer and installer cannot provide
y
y
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
y
y
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m (3.28 ft), the Magic remote control may
not perform as expected due to frequency
interference.
1
2
i
- Quick Links:
- External Control Device Setup
Hide quick links:
Advertisement
Table of Contents
