Page 2
Dear Customer Thank you for choosing one of our high quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best per formance and control indeed we are setting the highest standards of excel lence.
Contents Contents Operating Instructions Safety instructions Description of the Appliance Cooking surface layout Control panel layout Touch Control sensor fields Displays Operating the appliance Switching the appliance on and off Setting position of down draught extractor Setting fan level Switching intensive fan on and off Using the timer Safety cut out Cleaning and Care...
Operating Instructions Operating Instructions Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC –...
Page 5
Safety instructions Safety when cleaning • For cleaning, the appliance must be switched off. • For safety reasons, the cleaning of the appliance with steam jet or high pres sure cleaning equipment is not permitted. How to avoid damage to the appliance •...
Description of the Appliance Description of the Appliance Cooking surface layout Filter Upper casing Frontline strip Control panel Shaft of down draught extractor...
Description of the Appliance Control panel layout Fan level Timer indicator display Fan level selection Position selection On/Off Intensive fan Timer...
Description of the Appliance Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are con trolled by touching sensor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off...
Operating the appliance Operating the appliance Switching the appliance on and off Control panel Display Pilot light ¾ To switch on Touch for 2 seconds lights up To switch off Touch for 1 second none goes out After switching on, within approx. 10 seconds a function must be set, otherwise the appliance automatically switches itself off.
Operating the appliance Setting fan level Step Control panel Fan level display Fan power ¿ Touch once 150 m³/h À Touch once 220 m³/h Á Touch once 345 m³/h Switching off fan level Step Control panel Display ¾ Touch The fan level is switched off. Switching intensive fan on and off The intensive fan function makes extra power available for 5 minutes.
Operating the appliance Using the timer After the time set has elapsed, the suction switches off. The down draught ex tractor remains in the top position. Setting the time Step Control panel Display Touch once seconds Touch for longer (5 minute incre ments for easier setting) The time is set.
Cleaning and Care Cleaning and Care Important: A blocked grease filter can ignite. Keep appliance clean. Important: Sharp objects and abrasive cleaning materials will damage the ap pliance. Clean with a damp cloth and washing up liquid. Important: Residues from cleaning agents will damage the appliance. Remove residues with a damp cloth and washing up liquid.
Cleaning and Care Filter After 30 hours of operation the filter must be cleaned, 0 appears. Important: Fingers can get caught. Only remove filter or upper casing when ap pliance is dismantled. 1. Switch on down draught extractor and move to the top position. 2.
What to do if … What to do if … Problem Possible cause Remedy The appliance cannot be More than 10 seconds have Switch appliance on again switched on or is not operat passed since the appliance was switched on Several sensor fields were Only touch one sensor field touched at the same time...
Disposal Disposal Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dis pose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance The symbol on the product or on its packaging indicates that this product...
Installation Instructions Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regu lations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Page 17
Installation Instructions Suitable isolation devices include line protecting cut outs, fuses (screw type fus es are to be removed from the holder), earth leakage trips and contactors. Connect down draught extractor to an air tight vent hose or vent pipe with a 120 mm diameter and at least 1 m long.
Page 18
Installation Instructions Installing next to a gas appliance Important: The appliance must not be built in between two gas appliances. Important: If a gas appliance is installed next to the down draught extractor, the down draught extractor may only extract air on the opposite side. Therefore the fin nearest the gas appliance must be removed and the supplied cover must be fitted.
Installing more than one Frontline hob Installing more than one Frontline hob Additional parts: cross bar(s), heat resistant silicon, rubber block, shaving blade. Only use special heat resistant silicon. Cut out section Distance from the wall: at least 50 mm Depth:490 mm Width: The widths of all appliances to be built in are added together, minus 20 mm (see also “Overview of all appliance widths”)
Page 24
Installing more than one Frontline hob 5. Place first appliance in the cut out. Lay connecting cross bar in the cut out and push up halfway against the appliance. 6. Put silicon on the appliance corners that will touch one another. Put silicon on the end of the cross bar.
Page 25
Installing more than one Frontline hob 8. Place Frontline strips on the appliances. Check that the Frontline strips are in line with one another. 9. Tighten the fixing plate / retaining grip screws. 10. Inject a line of silicon into the gap between the appliances. 11.
Page 26
Installing more than one Frontline hob Overview of all appliance widths 180 mm Worktop mounted cooker hood 360 mm Glass ceramic cooking surface with 2 radiation cooking zones Glass ceramic cooking surface with 2 induction cooking zones Gas hob with 2 burners Grill Grill/Deep fat fryer 580 mm...
Standard guarantee conditions We, AEG, undertake that if within 12 months of the date of the purchase this AEG appliance or any part there of is proved to be defective by reason only of faulty workmanship or materials, we will, at our discretion repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: •...
Please note that a valid purchase receipt or guarantee documentation is required for in guarantee service calls. Customer Care For general enquiries concerning your AEG Electrolux appliance, or for further informa tion on AEG Electrolux products please contact our Customer Care Department by letter or telephone at the address below or visit our website at www.aeg.co.uk.