Lenovo ThinkServer RD430 Hardware Maintenance Manual page 189
Hardware maintenance manual - thinkserver rd430
Hide thumbs
Also See for ThinkServer RD430:
- Benutzerhandbuch (238 pages) ,
- Guías del usuario manual (236 pages) ,
- Manual d'utilisation (232 pages)
Table of Contents
Advertisement
CAUTION:
The heat sinks and microprocessors might be very hot. Turn off the server and wait three to five
minutes to let the server cool before removing the server cover.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Note: Depending on the model, your server might look slightly different from the illustrations in this topic.
To replace the system board, do the following:
1. Remove all media from the drives and turn off all attached devices and the server. Then, disconnect all
power cords from electrical outlets and disconnect all cables that are connected to the server.
2. If the server is installed in a rack cabinet, remove the server from the rack cabinet and place it on a flat,
clean, and static-protective surface. See the Rack Installation Instructions that comes with the server.
3. Remove the hot-swap redundant power supplies. See "Installing or replacing a hot-swap redundant
power supply" on page 129.
4. Remove the server cover. See "Removing the server cover" on page 83.
5. Remove the cooling shroud. See "Removing and reinstalling the cooling shroud" on page 91.
6. Record the component locations, cable connections, and cable routing in the server.
7. Remove the system fan cage with the installed system fans as a whole by lifting the system fan cage
straight up and out of the chassis.
Figure 135. Removing the system fan cage with system fans
8. Remove the two riser card assemblies. See "Replacing the riser card assembly 1" on page 159 and
"Replacing the riser card assembly 2" on page 161.
.
Chapter 6
Installing, removing, or replacing hardware
175
- Quick Links:
- Configuring Raid
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
