Table of Contents
Advertisement
[System]
[System] is displayed below the sub menu.
1) Press ▲▼ to select [System] below
the sub menu and press the <SELECT>
button.
■
z The sub menu 2 is displayed.
2) Press ▲▼ to select an item and press
the <SELECT> button.
z Press the <SELECT> button or ◀ to return to
■
the sub menu.
■ For computer input
■
When there is no input signal
compatible with the signal from
a connected computer on the
projector, the automatic PC
adjustment function works and
[Auto]
[Auto] is displayed on the system.
If images are not being correctly
projected, manually adjust the
settings to suit your computer and
register in [Store].
There is no input signal from the
—
computer.
Check the connections.
Select when inputting a digital
[Mode 1] -
signal from a computer to the
[Mode 10]
<DIGITAL (DVI-D) IN> terminal.
■ For video and S-video input
■
The projector automatically selects
[Auto]
the color system of the input signal.
This is a list of supported color
[PAL]/
systems. The Japanese color
[SECAM]/
system is NTSC. When the quality
[NTSC]/
of the input signal is poor (irregular
[NTSC4.43]/
color, absence of color etc.), and
[PAL-M]/
the color system is not selected
[PAL-N]
even when [Auto] is set, select
[NTSC].
■ For component input
■
The projector automatically selects
[Auto]
the scanning method of the input
signal.
Component
video scanning
methods
When video is not being played
([480p], [576p],
back correctly, select the correct
[720p], [480i],
scanning method from the menu.
[576i], [1035i],
[1080i], [1080p])
[Input] menu
ENGLISH - 45
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
