Table of Contents
Advertisement
6) Then use [Lens shift] to overlap the shaded areas.
■
z The red line will turn yellow if it is overlapped correctly.
Edge blending
Left
Right
Top
Bottom
Black level
Test pattern
Menu off
Exit
7) Turn [Test pattern] to [On] to display a 50% white test pattern.
■
z The overlapping areas will be displayed brighter than other areas.
8) Adjust [Black level] so that there is no difference between the overlapping areas and
other areas.
■
z To adjust the overlapping areas, setting the [Contrast] value in the [Image adjust] menu is recommended.
■ [Color matching]
■
9) Select [Color matching] in the [Setting] menu and display the setting screen.
10) Turn on color matching with [On] and adjust [Red]/[Green]/[Blue]/[White].
11) Select [Advanced color matching] if more detailed settings are required, and display
the setting screen.
12) Turn on advanced color matching with [On] and adjust each color with [Target].
■
z Set the [Target] value to within the [Measured] value range.
Advanced color matching
Measured
Red
Green
Blue
White
Red
Target
Green
Blue
Cyan
Magenta
Yellow
White
Auto test pattern
Menu off
Default
Exit
Back
Move
13) If the colors do not match even after adjusting [Target], use a colorimeter to
measure the chromaticity coordinates and luminance to make further adjustments.
On
Start
Width
Start
Width
Start
Width
Start
Width
All
All
On
Reset
Back
Back
Move
Next
If the left and right colors do not match,
proceed to the following step.
On
Information
Off
Test pattern
Store
Reset
Back
Next
Technical Information
Edge blending
Left
Right
Top
Bottom
Black level
Test pattern
Menu off
Exit
Back
Move
Line (yellow)
Frame (green): Projected image
Example) Value for "[Red], x"
"[Measured]=0.674", so [Target] is set to a smaller value of
"0.650".
On
Start
Width
Start
Width
Start
Width
Start
Width
All
All
On
Reset
Back
Next
ENGLISH - 91
- Quick Links:
- Troubleshooting
Hide quick links:
Advertisement
Table of Contents
