Table of Contents
Advertisement
Chapter 11
- The counter display type can be switched by executing COPIER>OPTION>USER>CNT-SW in service mode.
0: old sysytem (Type1) Default
1: new sysytem (Type2)
2: new system (Type3)
3: new system (Type4)
11.3.2 Overview
Color imageRUNNER C1030 / Color imageRUNNER C1030iF
The machine is equipped with counters that indicate the counts of output according to types of printers.
These counters are indicated in response to a press on the Check key on the control panel, and they operate as follows (as set at time of shipment from the factory):
Model
Counter 1
total 1
120V
*1
101
total 1
230V
*2
101
total
230V
(black-and-white/small)
*3
type1
(old system)
113
total 1
230V
*3
type2
101
(new system)
total 1
230V
*4
101
Guide to Notations
large: large-size paper (longer than 364 mm in feed direction; count increased by 1).
small: small-size paper (364 mm in feed length or shorter).
total: all (C+P; count increased by 1).
duplex: duplexing (in auto duplexing; count increased by 1).
- 3-digit number in the counter column indicates the setting value in the following service mode.
COPIER> OPTION> USER> COUNTER1 to 6
- From counter 2 to 6 can be changed in service mode COPIER> OPTION> USER> COUNTER
*1: 120V (America, Canada, South America 120V;region)
*2: 230V (Singapore, Korea, China, South America 230V;region)
*3: 230V (EU)
*4: 230V (Australia, Newzealand)
*: by default, not indicated; may be changed in service mode.
- The counter display type can be switched by executing
COPIER> OPTION> USER> CNT-SW in service mode
0:old system(Type1) Default
1:new system(Type2)
11.3.3 Timing of Increasing the Count
imageRUNNER C1022 / imageRUNNER C1022i / Color imageRUNNER C1030 / Color imageRUNNER C1030iF
The machine increases the count depending on the selected mode (single-sided, double-sided).
1. Single-Sided Print, 2nd Side of a Double-Sided Print
In the case of a single-sided print or the 2nd side of a double-sided print, the machine increase the count when the trailing edge of paper is discharged outside the
machine, as indicated by the output of the delivery sensor (SR715).
2. 1st Side of a Double-Sided Print
The machine increases the count when the pre-registration sensor (SR708) goes on, assuming that the printing on the 1st side is over.
11-6
T-11-3
Counter 2
total
(black-and-white 1)
(full color/small)
108
total
copy+print
(black-and-white 1)
(full color/sumall)
108
total
(full color+ mono color/
small)
123
*
000
total
(full color+ mono color/
(black-and-white 1)
108
Counter 3
Counter 4
copy
print
(full color/small)
230
322
total 1
(duplex)
402
114
scan
print
(total 1)
(total 1)
501
301
*
*
000
000
copy
print
(full color+ mono color/
small)
small)
230
322
0025-8974
Counter 5
Counter 6
*
*
000
000
*
*
000
000
*
*
000
000
*
*
000
000
*
*
000
000
0020-9643
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
