Figure 40. Installing the new slim card reader into the bracket
9. Route the cable of the new slim card reader through the corresponding hole for the slim card reader
bracket in the front of the chassis.
10. Install the slim card reader bracket into the chassis so that the hole in the bracket is aligned with the
corresponding hole in the chassis. Then, Install the screw to secure the slim card reader bracket to
the chassis.
Figure 41. Installing the slim card reader bracket
11. Connect the cable of the new slim card reader to the system board. See "Locating parts on the system
board" on page 6.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 114.
Replacing the heat sink and fan assembly
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
92
ThinkCentre M79 User Guide