Sub
05/08
Mode
Element
element
05
Adjustmen
Scanner
Scanner
Size detection of
t mode
original
05
Adjustmen
Scanner
Scanner
Size detection of
t mode
original
05
Adjustmen
Scanner
Scanner
Size detection of
t mode
original
05
Adjustmen
Scanner
Scanner
Size detection of
t mode
original
05
Adjustmen
Scanner
RADF
t mode
05
Adjustmen
Printer
Printer
Fine adjustment of
t mode
polygonal motor
rotation speed
05
Adjustmen
Printer
Printer
Fine adjustment of
t mode
polygonal motor
rotation speed
05
Adjustmen
Printer
Image
Adjustment of primary
t mode
scanning laser writing
start position.
e-STUDIO207L/257/307/357/457/507
Item
Subitem
Code
3233
3234
3236
3237
3350
Adjustment of primary
4000
scanning direction
reproduction ratio
Adjustment of primary
4001
scanning direction
reproduction ratio
4005
Sub-
Default
Acceptable
Details
code
value
value
Position adjustment in
Refer to
0-255
the primary scanning
contents
direction
Waiting position
200
0-255
adjustment of
carriage
Adjustment of lamp
128
0-255
lighting time
Starting time
64
0-255
adjustment of lamp
lighting
Trailing edge
50
0-100
adjustment of
scanning
PPC
128
0~255
PRT
133
0~255
PPC
Refer to
0~255
contents
5
RAM
Contents
SYS Adjusts the detection range for size of original.
<Default value>
NAD/TWD/CND: 128
Others: 58
SYS Adjusts the position where the carriage stops at the
size detection of the original.
Default value: 200 (20 mm from leading edge of
original)
Maximum value: 255 (25.5 mm from leading edge of
original)
Minimum value: 0 (0 mm from leading edge of original)
SYS Adjusts the lighting time of the lamp at the size
detection of the original.
Maximum value: 255 (Minimum time + 2040ms)
Minimum value: 0 (Minimum time)
SYS Adjusts the starting time of lamp lighting when the
detection accuracy of dark originals is poor.
Maximum value: 255 (Minimum time + 2040 ms)
Minimum value: 0 (Minimum time)
SYS When the value increases by "1", the trailing edge of
scanned original becomes longer by 0.3 mm at RADF
copying.
When the value decreases by "1", the trailing edge of
scanned original becomes shorter by 0.3 mm at RADF
copying.
* This code is effective when the value of 08-3075 is "1"
(Allowed).
M
When the value increases by "1", the reproduction ratio
of primary scanning direction increases by approx.
0.07%. (approx. 0.1 mm/step)
M
When the value increases by "1", the reproduction ratio
of primary scanning direction increases by approx.
0.07%. (approx. 0.1 mm/step)
M
When the value increases by "1", the writing start
position shifts to the front side by approx. 0.0423 mm.
<Default value>
e-STUDIO207L/257/307: 88
e-STUDIO357/457/507: 99
Proc
Service
edure
UI
1
1
1
1
1
1
Yes
1
Yes
1
Yes