Timing Waveforms Menu Fields; Markers - HP 1652B Getting Started Manual

Hide thumbs Also See for 1652B:

Table of Contents

The menu area contains fields that ahow you to change the display

parameters, place markers, and display waveform measurement

\68OOOTItlNG

1 Time X to 0 ]

Figure 19-3. Timing Waveforms Menu Fields

The Markers field allows you to specify how the X and 0 markers will

be positioned on the timing data. The options are:

0 Statistics

Markers Off/Sample Period

When the markers are off they are not visible and the sample period is

displayed. In transitional timing mode, the sample period will always be

10 ns. In Glitch mode, the sample period is controlled by the Time/Div

setting and can be monitored by turning the markers off.

The sample period displayed is the sample period of the last

acquisition. If you change the Time/Div setting, you must press RUN to

initiate another acquisition before the sample period is updated.

HP 16528/1653B

Front-Panel Reference

Although the markers are off, the logic analyzer still performs statistics,

so if you have specified a stop measurement condition the

measurement will stop if the pattern specified for the markers is found.

[68OOOTItlNG 1 - liming

Timing Waveforms Menu

Chapters

Table of Contents