Advertisement
Quick Links
B813071 - Transparency Unit
Unpacking the transparency unit . . . . . . . .
Removing the shipping screw . . . . . . . . . .
Installing the transparency unit . . . . . . . . .
document mat . . . . . . . . . . . . . . . . . .
Positioning transparencies and slides . . . . .
. . . . . . . . . . . .
3-2
3-2
3-3
3-4
3-6
3-7
3-11
3-1
Options
Advertisement
Related Manuals for Epson B813071
Summary of Contents for Epson B813071
-
Page 1: Table Of Contents
B813071 - Transparency Unit Using the Transparency Unit Unpacking the transparency unit ..Removing the shipping screw ..Installing the transparency unit .. -
Page 2: Using The Transparency Unit
Unpacking the transparency unit When you unpack your transparency unit, make sure you have all the items shown below and that none has been damaged during shipping. Contact your EPSON dealer if any item is missing or damaged. transparency guides... -
Page 3: Removing The Shipping Screw
Removing the shipping screw To prevent damage during shipping, a shipping screw is attached to the transparency unit. Follow the steps below to remove this screw before you install the transparency unit. 1. Turn the transparency unit so the glass side faces up. 2. -
Page 4: Installing The Transparency Unit
Note: Before transporting the scanner, you need to remove the transparency unit and reattach its shipping screw. You can attach the shipping screw only when the transparency unit’s lamp assembly is in its home position. To move it to its home position when the transparency unit is attached to the scanner, close the transparency unit, turn on the scanner, and then turn it off. - Page 5 3. Locate the two screws at the back of the scanner and slide the slots on the transparency unit forward underneath these two screws. 4. Insert the two screws provided with the transparency unit into the holes in the scanner as shown below, and then tighten the screws with a coin.
-
Page 6: Storing The Transparency Guides And Reflective Document Mat
6. Connect the transparency unit’s cable to the option connector on the scanner. Then reconnect the scanner’s power cable. Storing the transparency guides and reflective document mat As shown on the next page, the transparency unit comes with three transparency guides for scanning transparencies or slides and a reflective document mat for scanning normal paper documents. -
Page 7: Positioning Transparencies And Slides
-ransparency guides Positioning transparencies and slides You can scan transparencies or slides of various sizes using the transparency guides. Select the transparency guide to use according to the size of your transparency or slide as described in the table below. 1 Transparency or slide size 1 Up to 2.4 x 3.5 inches (6 x 9 cm) Up to 4 x 5 inches (10.2 x 12.7 cm) - Page 8 If your transparency is larger than the sizes in the table above, you can place it directly on the scanner’s document table without using a transparency guide, as shown below. The transparency unit allows you to scan transparencies up to 8% x 11 inches (21.6 x 27.9 cm) in size.
- Page 9 2. Hold up the clear plastic flap and insert the transparency or slide in the transparency guide, as shown below. 3. Place the transparency guide containing the transparency or slide face down on the scanner’s document table, aligning it in the upper right corner as shown below. 4.
- Page 10 Follow the steps below to position transparencies or slides using the transparency guide with two 10.25-inch-long openings: Open the transparency unit. Place the transparency guide on the scanner’s document table. Place the transparency face down on the document table, aligning it with the upper right corner of the transparency guide as shown below.
-
Page 11: Scanning Normal (Reflective) Documents
Scanning normal (reflective) documents To scan a normal reflective (paper) document when the transparency unit is installed, always use the reflective document mat included with the transparency unit. Also, make sure you remove the transparency guide from the scanner’s document table. Insert the reflective document mat as described below. -
Page 12: Using The Automatic Document Feeder
3. Position the reflective document and close the transparency unit. To remove the reflective document mat, slide it up and out of the slots on the transparency unit. Using the Automatic Document Feeder The automatic document feeder allows you to automatically load multiple-page documents into the scanner.