Related Manuals for LG PV Solar MODULE
Summary of Contents for LG PV Solar MODULE
- Page 1 Installation manual PV Solar MODULE Please read this manual carefully before operating your set and retain it for future reference. N-TYPE MODELS LGXXXN3C(W)-V6 LGXXXN3K-V6 www.lg.com/global/business/solar...
-
Page 2: Table Of Contents
TABLE OF CONTENTS SAFETY BEFORE & AFTER INSTALLATION Before Installation After Installation ELECTRICAL INSTALLATION Danger Electrical Connections Diodes Series Connection Parallel Connection General Wiring Earth Grounding MECHANICAL INSTALLATION Module Mounting Site Consideration Mounting Methods DISCLAIMER OF LIABILITY / DISPOSAL TRANSPORTING AND STORAGE REVISIONS TABLE PRODUCT SPECIFICATIONS Electrical &... -
Page 3: Safety
SAFETY The instructions related to the safety indicated in the Do not approach the damaged or following are for preventing unexpected danger or broken module unless you are an damage in advance by safely and exactly using the product. authorized or qualified expert. Fai lure to comply may result in serio DANGER us bodily injury or death. - Page 4 Installation during rain, heavy wi Module Installi nd or snowy day may result in b Module ng structure (Stral odily injury or death. Installing structure ght type) (bent type) Holes in the frame or glass of the module may decrease the strength of the frame or break the glass.
-
Page 5: Before & After Installation
BEFORE & AFTER INSTALLATION Before Installation • Be careful not to damage the cable when using a tool s Please carefully read this manual before installation. uch as a knife to remove the cable tie that fixes the junc • Solar module installation and maintenance must be tion box cable. -
Page 6: Electrical Installation
Diodes properties or physical configurations in the same sy stem. • All LG modules are equipped with factory installed b • Match the polarities of cables and terminals when ma ypass diodes. The factory-installed diodes provide p king the connections; failure to do so may result in da roper circuit protection for the module from unexpec mage to the panel. -
Page 7: Parallel Connection
LG meet the conditions of safety test conditions. The requirements of the National Elect class II. The national directives must be respected. -
Page 8: Mechanical Installation
The module generates maximum output power when it Excluded Operating Environments • The solar modules from LG Electronics can not be op faces the sun directly. The tilt angle of the modules sho uld be selected to optimize seasonal and sunlight erated in a location where they could come in direct co -based performance in the installation place. - Page 9 • The solar module may be mounted by using the Mounting by using clamps • The module may be fastened to a support by using following methods: (*Torque:8~12N∙m) • When installing modules in heavy snow areas, clamps on both the long edge and the short edge of the modules.
-
Page 10: Disclaimer Of Liability / Disposal
Disclaimer of Liability • By beginning to installation process, the installer has to read and completely understand this Installation Manual. • If installer had any questions regarding this installation manual, the installer would have contacted LG with any questions or concerns. -
Page 11: Transporting And Storage
TRANSPORTING AND STORAGE • Do not loosen the banding, when the module is transported by truck, ship and etc. I n case of loose banding, the module will be shaken, which may cause damage. • Do not stack on more than one pallet. Maximum height is two pallets. Severe stacking can cause stress to the module and may cause product damage. -
Page 12: Product Specifications
PRODUCT SPECIFICATIONS Rated electrical characteristic except power rating within -0/+3 percent are within 5 percent of measured. Values at Standard Test Condition(STC) : Irradiance 1000W/m , Cell temp. 25℃, 1.5AM Electrical Properties Mechanical Properties Max. Max. Pmax Pmax Max. Module Pmax Power Voc at... -
Page 13: Dimensions Of Modules
Dimensions of Modules Unit: mm / in. LGXXXN3C(W)-V6 / LGXXXN3K-V6 Frame Cross section Long Frame Short Frame... -
Page 14: Appendix
APPENDIX Mechanical Installation : 66Cell Model Fig 1. Bolting type(M8) Fig 2. Clamping Type Position Load Position Load (mm) Front/Rear(Pa) (mm) Front/Rear(Pa) 5400/4000 250 ~ 490 5400/4000 Fig 3. Clamping Type Fig 4. Clamping Type Position Load Position Load (mm) Front/Rear(Pa) (mm) Front/Rear(Pa) - Page 15 Fig 10. Clamping Type Position Load Position Load (mm) Front/Rear(Pa) (mm) Front/Rear(Pa) 0~300 250~400 2400/2155 2155/2155 250~400 0~300 Note) All mechanical installation methods and bolting method in this appendix were not tested by VDE. It is evaluated by LG internal test.
-
Page 16: Bolting & Clamp Information
Note) All mechanical installation methods and bolting method in this appendix were not tested by VDE. It is evaluated by LG internal test. - Page 18 Seoul 07336, Korea Contact: solar-svc@lge.com http://www.lg-solar.com This document is subject to change without notice. LG, LG logo and Life's Good are trademarks of LG Electronics, Inc. worldwide. Trademarks and i ntellectual properties of LG Electronics, Inc. are protected by international copyright laws.