Table of Contents
Advertisement
en
Switching the
appliance on
Fig. 2
Switch on the appliance with the
On/Off button 1.
A warning signal sounds.
The temperature display 4 flashes
and the alarm button 5 is lit.
Press the alarm button 5. The warning
signal switches off.
When the freezer compartment has
reached the set temperature, the
temperature display 4 is lit.
Operating tips
After the appliance has been switched
■
on, it may take several hours until
the set temperature has been
reached. Do not put any food
in the appliance beforehand.
The fully automatic No Frost system
■
ensures that the freezer compartment
remains free of ice. Defrosting is not
required.
The sides of the housing are
■
sometimes heated slightly. This
prevents condensation in the area
of the door seal.
If the freezer compartment door
■
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
26
Setting the
temperature
Fig. 2
Freezer compartment
The temperature can be set
from -16 °C to -26 °C.
Keep pressing temperature selection
button 3 until the required freezer
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 4.
We recommend a factory setting of
-18 °C in the freezer compartment.
Alarm function
In the following cases an alarm may be
actuated:
Door alarm
The door alarm (continuous sound)
switches on if the appliance door is open
for longer than one minute. Close the
door to switch off the warning signal.
Thaw alarm
When the alarm button 5 is pressed, the
temperature display indicates for five
seconds the warmest temperature
reached in the freezer compartment.
Then this value is deleted.
The display 4 indicates the set freezer
compartment temperature without
flashing.
Henceforth the "warmest temperature"
will be redefined and saved.
- Quick Links:
- Setting the Temperature
Hide quick links:
Advertisement
Table of Contents
