Table of Contents
Advertisement
en Home Connect
The temperature alarm can be
switched on in the following cases:
The appliance is switched on.
¡
Do not store any food until the ap-
pliance has reached the set tem-
perature.
Large quantities of fresh food are
¡
being placed inside.
Switch on Super freezing before
placing large quantities of food in
the appliance.
The freezer compartment door is
¡
open for too long.
Check whether the frozen food has
defrosted or thawed.
Switching off the temperature
alarm
Press alarm.
▶
The warning tone is switched off.
a
Home Connect
10 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
After switching on the appliance, wait
at least 3 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
18
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instruc-
tions in the Home Connect app.
Notes
Please note the safety precautions
¡
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
Operating the appliance on the ap-
¡
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up the
Home Connect app
Install the Home Connect app on
1.
your mobile device.
Start the Home Connect app and
2.
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
10.2 Setting up Home Con-
nect
Requirements
The Home Connect app has been
¡
installed on your mobile device.
The appliance is receiving signals
¡
1
)
from the WLAN home network (Wi-
Fi) at its installation location.
Advertisement
Table of Contents
