Table of Contents
Advertisement
Open the Home Connect app and
1.
scan the following QR code.
Follow the instructions in the
2.
Home Connect app.
10.3 Switching on the con-
nection to the WLAN
home network (Wi-Fi)
Press
.
▶
10.4 Switching off the con-
nection to the WLAN
home network (Wi-Fi)
Press
.
▶
10.5 Installing updates for the
Home Connect software
Note: If an update of the Home Con-
nect software is available, a message
appears in the Home Connect app.
To install the update for the
▶
Home Connect software, follow the
instructions in the Home Connect
app.
The control panel is partially
a
locked during the installation.
10.6 Resetting Home Connect
settings
If your appliance experiences con-
nection problems with the WLAN
home network (Wi-Fi) or your appli-
ance wants to log into a different
WLAN home network (Wi-Fi), you can
reset the Home Connect settings.
Press and hold
▶
until
goes out.
The Home Connect settings have
a
been reset.
10.7 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the in-
stalled Wi-Fi communication mod-
ule).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
The current software and hardware
¡
version of your appliance.
Status of any previous resetting to
¡
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Home Connect en
for six seconds
19
Advertisement
Table of Contents
