hit counter script

Frost Protection; Settings; Automatic Switch-Off - Siemens EQ.3 Instruction Manual

Fully automatic espresso machine ti 3.3., ti 3.5.
Hide thumbs Also See for EQ.3:
Table of Contents

Advertisement

Available languages

Available languages

en Settings

Frost protection

To prevent frost damage during
transportation and storage, completely
empty the appliance beforehand.
Info: The appliance must be ready for
use and the water tank filled.
Place a large container under the
1.
outlet of the milk frother and push
the frother down.
Press and hold the milk button for at
2.
least 5 seconds.
The LED in the button flashes, and
the appliance now heats up.
As soon as steam escapes from the
3.
milk frother, remove the water tank.
Allow the appliance to cool down.
4.
Wait until ) "Water tank empty"
appears.
Use the k button to switch the
5.
appliance off.
Empty the water tank and the drip
6.
tray and thoroughly clean the
appliance.
The appliance can now be transported
or stored.
The brewing unit is now secured
Note:
and cannot be removed.
40
1

Settings

This appliance has different factory
S e t t i n g s
settings. You can customise the settings
on the appliance.
If no button is pressed within
Note:
90 seconds, the appliance switches to
"Choose beverage" without saving. The
previous setting remains unchanged.
You can select the following settings:

Automatic switch-off

The appliance switches off automatically
i c s w i t c h - o f f
S e l e c t i n g a u t o m a t
at a specific time after the last button
was pressed. This time can be selected,
with settings from 15 minutes to
4 hours possible here.
Press and hold % and
1.
calc'nClean for at least 3 seconds.
Touch the "V" button
2.
cappuccinorepeatedly until "Auto
Stand-by" appears.
Confirm by pressing the "ok" button
3.
latte macchiato.
The factory settings are activated,
the language selection appears.
Touch the "V" button cappuccino
4.
and select the time. The following
settings are possible:
after 15 min.
after 30 min. (factory setting)
after 1 hour
after 2 hours
after 4 hours
Confirm by pressing the "ok" button
5.
latte macchiato.
The factory settings are activated,
the language selection appears.
Touch the "¾" button caffe crema to
6.
exit the menu.

Advertisement

Table of Contents
loading

Table of Contents

Save PDF