Accumulate Mode; Connect Dots Field; Grid - HP 1652B Getting Started Manual

Hide thumbs Also See for 1652B:

Table of Contents

To exit the Average mode, select the AVG# field next to the Average

Integer field. The default value for the Average # field is 8.

Accumulate Mode

In Accumulate mode, the oscilloscope accumulates all waveform

acquisitions on screen without erasing the previously acquired

waveforms. This is similar to infinite persistence on an analog storage

oscilloscope. These acquisitions will stay on the display until Mode is

changed, or until the waveform is adjusted by a control that causes the

display to change, such as s/Div or V/Div.

Connect Dots

The Connect dots field is located on the right side of the top row of

fields. When Connect dots field is selected, it will toggle between on

When Connect dots is On, each displayed dot will be connected to the

adjacent dot by a straight line. A waveform with Connect Dots set to

On, will be well defined and easier to see.

The default setting for the Connect dots field is Off.

When the Grid field is selected, it will toggle between on and off.

When the grid is turned on, the major divisions for both time and

voltage will be marked with dotted lines.

HP 16528/1653B

Waveforms Menu

Front-Panel Reference

Chapters

Table of Contents