Control Panel; Temperature Setting Buttons - AEG SANTO Series Operating Instructions Manual

Electronic refrigerator/freezer

Hide thumbs Also See for SANTO Series:

Table of Contents

Appliance Description

Control panel

ON/OFF button

Fridge section indicator

Temperature indicator for fridge section

Buttons for setting temperature for fridge section

Thermometer indicator for fridge section (with COOLMATIC)

MODE button for setting the operating mode

Text display

RESET button

Freezer section indicator

Temperature indicator for freezer section

Buttons for setting temperature for freezer section

Thermometer indicator for freezer section (with FROSTMATIC)

These buttons are connected to the temperature display.

• The temperature display is switched over from the display of the

ACTUAL temperature (Temperature display is illuminated) to the dis-

play of the DESIRED temperature (Temperature display flashes) by

pressing one of the two buttons, „+" (WARMER) or „-" (COLDER).

• Each time one of the two buttons is pressed again the DESIRED tem-

perature is adjusted by 1 °C.

• If neither button is pressed, the temperature display automatically

switches back after a short period (approx. 4 sec.) to the display of

the ACTUAL temperature.

DESIRED temperature means:

The temperature that has been selected for inside the fridge or the

freezer compartment. The DESIRED temperature is indicated by flashing

numbers.

The temperature is adjusted using the

„+" (WARMER) and „-" (COLDER) buttons.

818 37 09-01/6

Table of Contents