Replacing The Light Bulb - AEG SANTO Series Operating Instructions Manual

Electronic refrigerator/freezer

Hide thumbs Also See for SANTO Series:

Table of Contents

What to do if ...

Symptom

Noise

If after the above checks there is still a fault, call your local AEG Service

Force Centre.

In-guarantee customers should ensure that the above checks have been

made as the engineer will make a charge if the fault is not a

mechanical or electrical breakdown.

Please note that proof of purchase is required for in-guarantee service

calls.

Replacing the Light Bulb

For safety reasons the interior lighting switches off after 7 minutes

when the door is open. It switches on again the next time the door is

opened.

Warning! Danger of electrical shock! Before replacing the light bulb

switch off the appliance and remove the mains plug.

Light bulb specifications: 220-240 V, max. 25 W, fitting: E 14

1. To switch the appliance off press and hold the ON/OFF button.

2. Unplug the mains plug.

3. To change the light bulb, undo the

cross head screw and remove the

light bulb cover downwards.

4. Change the defective light bulb.

5. Refit the light bulb cover and the

cross head screw.

Possible Cause

Appliance is not level.

Solution

Readjust the front levelling

feet.

Refer to Normal Operating

Sounds

818 37 09-01/6

Table of Contents