Show Cdp Entry - Cisco Nexus 5000 Series Command Reference Manual
Interface
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Operation manual (45 pages)
Table of Contents
Advertisement
Show Commands
show cdp entry
To display the interfaces in the Cisco Discovery Protocol (CDP) database, use the show cdp entry command.
show cdp entry {all| name device-name}
Syntax Description
all
name device-name
Command Default
None
Command Modes
EXEC mode
Command History
Release
5.0(3)N2(1)
Examples
This example shows how to display all the entries in the CDP database:
switch# show cdp entry all
----------------------------------------
Device ID:savbu-qa-dist-120
System Name:
Interface address(es):
Platform: cisco WS-C3750E-24TD, Capabilities: Switch IGMP Filtering
Interface: mgmt0, Port ID (outgoing port): GigabitEthernet1/0/13
Holdtime: 179 sec
Version:
Cisco IOS Software, C3750E Software (C3750E-UNIVERSAL-M), Version 12.2(35)SE5, RELEASE
SOFTWARE (fc1)
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Thu 19-Jul-07 16:17 by nachen
Advertisement Version: 2
Native VLAN: 16
VTP Management Domain:
Duplex: full
Mgmt address(es):
----------------------------------------
Device ID:swor96(SSI13110AAQ)
System Name:swor96
Interface address(es):
Platform: N5K-C5010P-BF, Capabilities: Switch IGMP Filtering Supports-STP-Dispute
Interface: Ethernet1/17, Port ID (outgoing port): Ethernet1/19
IPv4 Address: 192.168.0.82
IPv4 Address: 192.168.0.82
IPv4 Address: 192.168.0.1
Displays all interfaces in the CDP database.
Displays a specific CDP entry matching a name. The
device name can be a maximum of 256 alphanumeric
characters.
Modification
This command was introduced.
Cisco Nexus 5000 Series Interfaces Command Reference
show cdp entry
97
- Quick Links:
- Interface Ethernet
Hide quick links:
Advertisement
Chapters
Table of Contents
