Interface Ethernet (Layer 3); Cisco Nexus 5000 Series Interfaces Command Reference - Cisco Nexus 5000 Series Command Reference Manual
Interface
Hide thumbs
Also See for Nexus 5000 Series:
- Cli configuration manual (660 pages) ,
- Configuration manual (334 pages) ,
- Operation manual (45 pages)
Table of Contents
Advertisement
interface ethernet (Layer 3)
interface ethernet (Layer 3)
To configure a Layer 3 Ethernet IEEE 802.3 routed interface, use the interface ethernet command.
interface ethernet [chassis_ID /] slot / port [.subintf-port-no]
Syntax Description
chassis_ID
slot
port
.
subintf-port-no
Command Default
None
Command Modes
Global configuration modeInterface configuration mode
Command History
Release
5.0(3)N1(1)
Cisco Nexus 5000 Series Interfaces Command Reference
46
(Optional) Specifies the Fabric Extender chassis ID.
The chassis ID is from 100 to 199.
This argument is not optional when
Note
addressing the host interfaces of a Cisco
Nexus 2000 Series Fabric Extender.
Slot from 1 to 3. The following list defines the slots
available:
• Slot 1 includes all the fixed ports. A Fabric
Extender only has one slot.
• Slot 2 includes the ports on the upper expansion
module (if populated).
• Slot 3 includes the ports on the lower expansion
module (if populated).
Port number within a particular slot. The port number
is from 1 to 128.
(Optional) Specifies the subinterface separator.
(Optional) Port number for the subinterface. The
range is from 1 to 48.
Modification
This command was introduced.
I Commands
- Quick Links:
- Interface Ethernet
Hide quick links:
Advertisement
Chapters
Table of Contents
